Lincoln Electric Viking PAPR FGS 3250D Manual

Lincoln Electric Ikke kategoriseret Viking PAPR FGS 3250D

Læs gratis den danske manual til Lincoln Electric Viking PAPR FGS 3250D (32 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Lincoln Electric Viking PAPR FGS 3250D, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

Operator’s Manual

VIKING PAPR FGS 3250D

WELDING HELMET

www.lincolnelectric.com/register

Authorized Service and Distributor Locator:

www.lincolnelectric.com/locator

IM10524 | Issue D ate Mar-21

Save for future reference

Date Purchased

K#: (ex: K3930-1)

Serial: (ex: U1060512345)

POWERED AIR-PURIFYING RESPIRATOR (PAPR)

WITH FGS 3250D AUTO-DARKENING HELMET

WARNING: Users must read and understand the

user instructions prior to use. Use of this respirator

by untrained or unqualified people, or use that is not

in accordance with these user instructions, may

adversely affect respirator performance and may

be dangerous to your health. Keep this operator’s

manual for future reference.

CODE NUMBER:

12895

12894

FUMES AND GASES can be dangerous to your health

• Fumes from the normal use of welding

products contain significant quantities of

potentially hazardous compounds. See

consumable product label/insert.

• Keep your head out of fumes.

• Use enough ventilation or local exhaust to keep fumes and

gases from your breathing zone and general area.

• An approved respirator should be used unless exposure

assessments are below applicable exposure limits.

• When welding with electrodes which may require additional

ventilation such as stainless or hard facing (see instructions on

container or Safety Data Sheet (SDS) or on lead or cadmium

plated steel and other metals or coatings which produce highly

toxic fumes, keep exposure as low as possible and within

applicable OSHA PEL and ACGIH TLV limits using local exhaust

or mechanical ventilation. In confined spaces or in some

circumstances, outdoors, a respirator may be required.

Additional precautions are also required when welding on

galvanized steel.

NIOSH approval

IMPORTANT: THIS RESPIRATOR IS INTENDED TO BE USED BY

TRAINED INDIVIDUALS IN ACCORDANCE WITH

ALL THE PROVISIONS OF AN ORGANIZED

RESPIRATORY PROTECTION PROGRAM WHICH

COMPLIES WITH THE REQUIREMENTS OF THE

OSHA STANDARD 29 CFR 1910.134 AVAILABLE

FROM THE US DEPARTMENT OF LABOR,

OCCUPATIONAL SAFETY AND HEALTH ADMINIS-

TRATION OR IN CANADA CONFORMANCE WITH

CSA Z94.4.

The Viking PAPR 3350 is approved in the USA by NIOSH for use

in environments where:

• Particulate concentrations are known and characterized.

• Particulate concentrations are not I mmediately Dangerous to

Life or Health (IDLH).

• Atmospheres are NOT oxygen deficient.

• Contaminant concentrations do not exceed the Maximum Use

Concentration (MUC) determined using the Assigned Protection

Factor (APF) for specific respirator system or the APF

mandated by specific government standards, whichever is

lower.

The Viking PAPR 3350 respirator components and filtration

media must be used only in configurations listed on the NIOSH

approval label. Refer to NIOSH approval label for list of approved

components.

This respirator is not capable of or approved for use in an area

which includes hazardous levels of gases . It is only effective to

filter out particulate contaminants.

ARC Rays can injure eyes and burn skin

• Before welding, always inspect helmet and

filter lens to be sure they are fitted

properly, in good condition and not

damaged.

• Check to see that the clear lens is clean and securely attached

to the helmet.

• Always wear safety glasses with side shields or goggles under

the welding helmet and protective clothing to protect your

skin from radiation, burns and spatter.

• Ensure that optical radiation from other welder’s arcs in the

immediate area does not enter in from behind the helmet

and auto-darkening filter.

• Stop welding immediately if the auto-darkening lens does not

darken when arc is struck. See instruction manual

for troubleshooting information.

• Do not weld in the overhead position while using this

helmet.

Note: Auto-darkening filters in Lincoln helmets are designed to

protect the user against harmful ultra-violet and infrared

rays both in the dark and light states. No matter what

shade the filter is set to, the UV/IR protection is always

present.

SAFETY

SAFETY WARNINGS – READ BEFORE USING

Refer to for additional safety information.http: //www.lincolnelectric.com/safety

Produkt Specifikationer

Mærke:	Lincoln Electric
Kategori:	Ikke kategoriseret
Model:	Viking PAPR FGS 3250D

Har du brug for hjælp?

Hvis du har brug for hjælp til Lincoln Electric Viking PAPR FGS 3250D stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Lincoln Electric Manualer

Lincoln Electric Linc-Cut 3015 CNC Fiber Laser Manual

20 Juli 2025

Lincoln Electric POWER MIG 255XT Manual

19 Juli 2025

Lincoln Electric LINCGUN PROMIG AIR 230T Manual

14 Marts 2025

Lincoln Electric LINCGUN PROMIG WATER 330W Manual

14 Marts 2025

Lincoln Electric VRTEX Engage Manual

11 Januar 2025

Lincoln Electric CHAMELEON 3V0 Manual

4 Januar 2025

Lincoln Electric Prism Wall Mount Manual

9 December 2024

Lincoln Electric COOLERTIG 4 Manual

9 December 2024

Lincoln Electric Oil Guardian Manual

9 December 2024

Lincoln Electric Inferno Torch KH825 Manual

9 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech EAI-3100 Manual

30 Juli 2025

Deye SUN-M180G4-EU-Q0-I Manual

30 Juli 2025

Crestron STIRP Manual

30 Juli 2025

Intellinet 790741 Manual

30 Juli 2025

Saris Edge 2-Bike Manual

30 Juli 2025

Advantech ROM-3310 Manual

30 Juli 2025

Advantech EKI-1751I Manual

30 Juli 2025

Advantech ICR-1601W Manual

30 Juli 2025

C2G 29341 Manual

30 Juli 2025

Advantech ITA-8120 Manual

30 Juli 2025