
This data is internal to Brunswick.
Lowrance Hook Reveal Troubleshooting and
Hook2 or Hook Reveal - How to solve "not powering on."
If your Hook2 or Hook Reveal unit will not power on, please try these possible solutions:
1. Check the connection in the back of the unit. Make sure that the power
plug is completely pushed into the unit.
2. Be sure your boat battery is charged up and providing 12 volts through the
3. Check the fuse on the power positive line. Make sure that the fuse is
intact, free of corrosion, and the connections are solid.
4. If you've used spade connectors, please make sure that they are properly
5. If your unit displays the Hook logo and immediately powers down, press
the power button repeatedly to cycle through the backlight levels. is will Th
brighten the screen and enable the unit to be used.
If you're having problems getting the connector pushed all the way in you can use
silicon spray to help lessen the friction caused by the rubber seals.
We recommend using silicon spray from CRC, Liquid Wrench, or WD- 40
Spray a small amount directly into the connector hole in the back case of the product
rather than on the connector itself.
Using any kind of grease can create an airlock which pushes back on the connector and
may create an intermittent contact leading to loss of power or Sonar function.
Where can I find manuals for my Lowrance device?
The manuals are available from ve locations