
WARNING:
When hanging the xture from higher position, please make sure you use a safety cable to
attach the barndoors to the yoke of the fresnel.
Barndoors should always be secured to the yoke when used in this way.
Another safety cable should be used to secure the xture to the mounting pipe or truss.
Both safety cables must be properly dimensioned for the xture and the application when
the xture is operated in hanging position please ensure that the accessories are installed
correctly with top latch locked.
SAFETY PRECAUTIONS:
Do not operate the equipment before studying
the instruction manual and the accompanying
safety precautions. Make sure that Lupo
Safety Instruction is always included with
the equipment! Lupo products are intended
for professional use. Do not place or use
the equipment where it can be exposed to
moisture, extreme electromagnetic elds
or in areas with ammable gases or dust!
Do not expose the equipment to dripping or
splashing. Do not place any objects lled
with liquids on or near the equipment. Do not
expose the equipment to hasty temperature
changes in humid conditions as this could lead
to condensation water in the unit. Equipment
must only be serviced, modied or repaired by
authorized and competent service personnel!
CAUTION - BURN HAZARD - HOT PARTS
Do not touch hot parts with bare ngers! LED
bulbs and certain metal parts emit strong heat
when used! Do not point lamps too close to
persons. Always use the xtures with the front
part closed.
NOTICE - EQUIPMENT OVERHEATING RISK
Do not obstruct ventilation by placing lters,
diffusing materials, etc. over inlets and outlets
of the equipment ventilation or directly over
glass cover or LED bulbs.
FINAL DISPOSAL
When no longer in use, this product may not
be deposited in the normal household waste
but should be brought to a collection point
for the recycling of electrical and electronic
appliances. The materials are recyclable as
marked. By re-use, recycling or another form
of usign old appliances you are making an
important contribution towards the protection
of the environment. Please ask your local
authorities for the appropriate disposal point.
Equipment contains electrical and electronic
components that could be harmful to the
environment.
Equipment may be returned to Lupo
distributors free of charge for recycling
according to WEEE.
Follow local legal requirements for separate
disposal of waste, for instance WEEE directive
for electrical and electronic equipment on the
European market, when product life has ended!
MAINTENANCE AND CARE
Please do not forget that the safe operation
of lampheads also includes their maintenance
and care. A visual inspection should be
conducted before every use and an inspection
of electrical safety should be conducted at
least once every 12 months.
WARRANTY
Each Lupo product will be repaired free of
charge by Lupo if during a period of 12 months
for mechanical components and 12 months
for electrical/electronic components from
date of purchase its working order is impaired
through a manufacturing or material defect.
The faulty product should be immediately sent
to authorized dealer or Lupo. This warranty is
not valid for equipment which has been used
improperly, dismantled, modied or repaired by
persons not belonging to the Lupo distribution
network. It does not cover lamps, lenses or the
material entirely or partially made of glass. No
responsibilities can be accepted for damage
resulting from unsatisfactory operation of the
equipment. Please contact the dealer who sold
the xture/s before any units are returned for
repair. Lupo will make the nal determination
as to whether or not the unit is covered by
warranty. Lupo will replace or repair to proper
working condition any products that are
returned under waranty. Products repaired or
replaced under warranty are under warranty
only for the remaining unexpired period of
time of the original warranty. Any product unit
or part returned to Lupo must be packaged
in a suitable manner to ensure the protection
of such product unit or parts. The package
must be clearly an prominently marked to
indicate that the package contains returned
product units or parts. All returned product
units or parts must be accompanied by a
written explanation of the alleged problem or
malfunction.
Thanks for having purchased Lupo products. All the products are made in Italy and all the efforts
have been put to keep the quality standards high. We hope this product can help you in your job and
make your life easier as a professional. We also hope you will enjoy its use and we would be happy
to receive your feedback about it.