Luxli Cello² Manual

Luxli Flashenhed Cello²

Læs gratis den danske manual til Luxli Cello² (2 sider) i kategorien Flashenhed. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Luxli Cello², eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

To obtain warranty coverage, contact the Luxli Customer Service

Department to obtain a return merchandise authorization (“RMA”)

number, and return the defective product to Luxli along with the RMA

number and proof of purchase. Shipment of the defective product is

at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.luxlilight.com or

call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

LUXLI is a registered trademark of the Gradus Group.

One-Year Limited Warranty

This LUXLI product is warranted to the original purchaser to be free

from defects in materials and workmanship under normal consumer

use for a period of one (1) year from the original purchase date or

thirty (30) days after replacement, whichever occurs later. The warranty

provider’s responsibility with respect to this limited warranty shall be

limited solely to repair or replacement, at the provider’s discretion, of

any product that fails during normal use of this product in its intended

manner and in its intended environment. Inoperability of the product

or part(s) shall be determined by the warranty provider. If the product

has been discontinued, the warranty provider reserves the right to

replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by

misuse, neglect, accident, alteration, abuse, improper installation

or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY

PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED

WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This

warranty provides you with specic legal rights, and you may also

have additional rights that vary from state to state. GG1

Precautions FCC Compliance Statement

•

Please read and follow these instructions, and keep this manual

in a safe place.

•

Keep this product away from water and ammable gases or liquids.

• Use only the correct, recommended voltage.

• Do not attempt to disassemble or repair this product.

• Clean this product with only a soft, dry cloth.

• To avoid damage to this product, be careful not to overtighten or

improperly thread any of the threaded ttings.

• All images are for illustrative purposes only.

This device complies with part 15 of the FCC rules. Operation is subject

to the following two conditions:

1. This device may not cause harmful interference

This device must accept any interference received, including

interference that may cause undesired operation.

Important: Changes or modications to this product not authorized by

Gradus Group could void the electromagnetic compatibility (EMC)

and wireless compliance and negate your authority to operate the

product. This product has demonstrated EMC compliance under

conditions that included the use of compliant peripheral devices

and shielded cables between system components. It is important that

you use compliant peripheral devices and shielded cables between

system components to reduce the possibility of causing interference

to radios, televisions, and other electronic devices.

Conduct an orchestra of lights.

The Luxli Orchestra series can produce a dazzling symphony of light.

Synchronize LED light units of all sizes, choose from millions of possible

colors, apply lighting effects from three selectable modes, and control

them instantly with the powerful Composer mobile app.

The Cello2 10-inch multicolor LED light features highly accurate and

remarkably versatile RGBAW LEDs. The light is equipped with Bluetooth 5,

which pairs with Luxli’s Composer mobile app from up to 100 feet

away. Whether controlled via the app or the intuitive interface on the

unit itself, the Cello2 will illuminate your creative vision with endless

possibilities.

For the latest version of the Composer mobile app, rmware updates,

and a PDF of the full user manual, as well as videos and ideas for

creative uses for the Cello2, visit luxlilight.com.

www.luxlilight.com

Troubleshooting

• If you encounter any problems, rst try turning the device off and

then on.

•

If the problem persists, remove the battery for 15 seconds, and

then restart.

QUICKSTART GUIDE

Updating the Firmware

Firmware updates are now available through the Composer app.

Refer to the Composer app’s user manual for information and

instructions.

Warnings

•

Battery Low: Battery bar indicator turns red when the battery is below

10%. Recharge the battery immediately.

• Battery Empty: The LEDs will shut off.

•

Overheat: The LEDs will shut off and brightness adjustment is disabled

until the unit has cooled to a safe temperature

Important! If the unit frequently overheats, contact Luxli customer

support.

• USB Insufcient Voltage: UNABLE TO CHARGE — USB-PD: 12 or 15 V

• DC Insufcient Voltage: UNABLE TO CHARGE — DC PORT: 11–15 V

Overview Powering the Cello

Operation Modes

Indicators Connecting to the Composer App

Back:

1. Battery slot

2. Battery release button

3. Adjustment knob

4. Brightness knob

5. LCD screen

Bottom:

6. Mode selector button

7. Power button

8. 1/4-20 socket

9. DC power input

10. USB Type-C™ port

The Cello

runs on either DC power, a Sony NP-F style battery, or via

the USB Type-C™ port.

DC Power

Plug a 2.1 mm power cord into the DC input and a power outlet that

outputs at a minimum of 30 W between 11 and 15 V.

Battery

Slide a Sony NP-F style battery into the battery slot, making sure the

terminals and contacts are aligned.

USB Type-C

Connect the Cello

’s USB Type-C input with the USB Type-C wall charger.

In order to power the Cello

, the wall charger must have Power Delivery

3.0 and a minimum output of 30 W at either 12 or 15 V.

Recharging the Battery

The battery can be recharged while seated in the battery slot by

connecting a compatible power source to either the DC or USB-C port.

Each of the four operation modes described below is accessed by

repeatedly pressing the mode selector. For complete descriptions

and operating instructions, visit luxlilight.com to download the full

user manual.

CCT Mode

Allows accurate color temperature adjustment from 2800 to 10,000 K

and green/magenta saturation level.

HSL Mode

Scroll thought the entire color wheel, and adjust the saturation level.

Filter Mode

Adjust the color temperature setting in 50 K increments and apply

one of the 150 colored gels.

Effects Mode

Includes 10 animated effects with variable parameters.

1. Enable Bluetooth on your device, and open the Composer app.

2. Power on the Cello².

Note: If the Bluetooth icon is not visible, follow the instructions to

enable Bluetooth below.

3. Tap the Look for Lights icon in the Composer app.

The app will prompt you to complete the connection with the

Cello². Once you do, the Bluetooth icon changes to connected,

and the light is ready to use with the app.

To disconnect, exit the app. The Cello² will return to Bluetooth search

mode.

To disable Bluetooth on the Cello², press and hold the mode button

until the Bluetooth icon disappears.

To enable Bluetooth, press and hold the mode button until the

Bluetooth search icon appears onscreen.

Also Included

• Shoe-mount ball head

• NP-F750 battery

• USB Type-C wall charger

Specications

Light Panel 176 RGBAW LED

Color Temperature 2800 to 10,000 K

Bluetooth Version 5

Battery Mount Sony NP-F style

DC Input Power 7 to 15 V

DC Connector 2.1 mm barrel

USB Connector USB Type-C female

Power Delivery Version 3.0

USB Input Power 12 V, 15 V

Maximum Wattage 30 W

Dimensions (W × H × D) 9.5 × 3.6 × 0.8 in. (24 × 9.3 × 2 cm)

Weight 12.5 oz. (354.8 g)

•

USB Type-C male to USB Type-C

male cable

• Quickstart guide

3. Battery indicator

• Green: 100% to 25%

• Yellow: 25% to 10%

• Red: Less than 10%

4. Bluetooth status indicator

Search mode

Connected

1. Operation mode indicator

2. Power mode indicator

Battery icon: Running on

battery power.

Plug icon: Running on external

power source.

Lightning bolt icon: Charging

in progress.

CELLO2

7-15 V

PD 3.0 30W

12V, 15V

1 2

6 7 9 108

Produkt Specifikationer

Mærke:	Luxli
Kategori:	Flashenhed
Model:	Cello²

Har du brug for hjælp?

Hvis du har brug for hjælp til Luxli Cello² stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Flashenhed Luxli Manualer

Luxli Cello² Manual

10 December 2024

Luxli Viola² Manual

10 December 2024

Flashenhed Manualer

Nyeste Flashenhed Manualer

Minox Digital Classic Camera Manual

21 September 2025

Minox ECX Manual

20 September 2025

Impact SF-AE80 Manual

18 September 2025

Aputure Light Dome SE Manual

15 September 2025

Vello OCS-SM15 Manual

12 September 2025

10 September 2025

10 September 2025

10 September 2025

9 September 2025

8 September 2025