Lynx Technik Yellowbrik CHD 1802-1 Manual

Lynx Technik Ikke kategoriseret Yellowbrik CHD 1802-1

Læs gratis den danske manual til Lynx Technik Yellowbrik CHD 1802-1 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Lynx Technik Yellowbrik CHD 1802-1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
LYNXTechnik AG
yellobrik
Quick
Reference
®
CHD 1802-1
HDMI to SDI Converter
USB Connection
(for yelloGUI control & updates)
Power In (12v)
SDI Fiber Output
(Option)
SDI Outputs (2)
HDMI Present
Warning
Class 1 Laser Product
HDMI Input
NOTE: This module will not convert HDMI
content which has embedded HDCP
copy protection.
Power / Status LED
Module LEDs
The module has several LEDs included to indicate status.
Function is described below:
HDMI Present LED
= Valid signal connected / converted
= (out) Signal not valid or missing (or if HDMI has HDCP protection)
Power / Status LED
= Power OK and no internal programmed settings are present
= Power OK and some programmed settings are active*
= (out) Power not present
* Some settings have been made using the yelloGUI and the LED indicates this
by turning yellow. The module can be reset to factory default using the yelloGUI
application, or by using the internal reset switch on the side of the module,
which can be accessed though a hole with a paperclip (or similar).
USB Port / Firmware Updates / yelloGUI
The USB interface on the module is used for rmware updates and for
control of the module using the yelloGUI software application.
To update a yellobrik, power it and connect it to the PC or Mac running
the yelloGUI software with the provided USB cable. The yelloGUI
software will indicate if a new rmware is available for the connected
module and will guide you through the update process.
Firmware updates are always free of charge.
For more information and to download the yelloGUI application please
goto:
http://yellogui.lynx-technik.com
HDMI is connected but no SDI output ? - Common Causes
When two HDMI devices are connected together the EDID
communication protocol automatically determines the highest
resolution both devices support and congures the HDMI link to that
resolution. As the CHD 1802-1 supports video formats up to
1080p/60Hz the SDI output will typically default to 1080p/60 (3Gbit/s
SDI) which if used in a standard 1.5GHz or 270Mbit SDI environment will
not display an image. If 1.5Gbit or 270Mbit SDI output is needed, then
the HDMI source device should be manually set to output the desired
video resolution. Alternatively, it is possible to use the yelloGUI
application to force the CHD 1802-1 into the desired video format. 
   
 
The HDMI content may have HDCP copy protection, in which case the
HDMI present LED will be OUT and the module will block the conversion
and provide a black SDI output.
Note: 
 


Still Having Problems?
Please visit the support center on our website and browse or search the
knowledge base, or open a support ticket with your specic questions
  
Power Lead Strain Relief
The module has a small hole in
the case located above the
power connection. To prevent
the power lead being
accidentally pulled out, use the
supplied tie-wrap and secure
the lead as shown opposite.
Reset (hole)

Produkt Specifikationer

Mærke: Lynx Technik
Kategori: Ikke kategoriseret
Model: Yellowbrik CHD 1802-1

Har du brug for hjælp?

Hvis du har brug for hjælp til Lynx Technik Yellowbrik CHD 1802-1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Lynx Technik Manualer

Lynx Technik

Lynx Technik Yellowbrik CHD 1802-1 Manual

5 November 2025
Lynx Technik

Lynx Technik Yellowbrik CQS 1441 Manual

4 November 2025
Lynx Technik

Lynx Technik Yellowbrik HD 1802-1 Manual

31 August 2024
Lynx Technik

Lynx Technik Yellowbrik CDH 1411 Manual

31 August 2024
Lynx Technik

Lynx Technik Yellowbrik CHD 1402 Manual

31 August 2024
Lynx Technik

Lynx Technik Yellowbrik QS 1441 Manual

31 August 2024
Lynx Technik

Lynx Technik Yellowbrik CHD 1812-1 Manual

31 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ikea

Ikea HUMLESJÖN 306.009.58 Manual

8 Januar 2026
Ikea

Ikea BORSÅN 803.274.38 Manual

8 Januar 2026
WAC Lighting

WAC Lighting MT4LD116NE Manual

8 Januar 2026
Canarm

Canarm KE-14S Manual

8 Januar 2026
Fantech

Fantech RTS5 Manual

8 Januar 2026
Leifheit

Leifheit Parat 25794 Manual

8 Januar 2026
Siemens

Siemens SN63H801VE Manual

8 Januar 2026
Glass Warehouse

Glass Warehouse GHF-66.5 Manual

8 Januar 2026
Crystorama

Crystorama Dumont DUM-9808-GE Manual

8 Januar 2026
Panduit

Panduit CNLTD21B2 Manual

8 Januar 2026