Makita DJS130Z Manual

Makita En saks DJS130Z

Læs gratis den danske manual til Makita DJS130Z (12 sider) i kategorien En saks. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Makita DJS130Z, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
IMPORTANT: Read Before Using.
Cordless Metal Shear
BJS130
009011
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model BJS130
Steel up to 400 N/mm2 1.3 mm (18 ga.)
Max. cutting capacities
Stainless Steel up to 600 N/mm
2
1.0 mm (20 ga.)
Strokes per minute (min
-1) 2,800
Overall length 350 mm
Net weight 2.2 kg
Rated voltage D.C. 18 V
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-4
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE037-1
Intended use
The tool is intended for cutting sheet steel and stainless
sheet steel.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA) : 74 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : cutting sheet metal
Vibration emission (ah,CM) : 5.5 m/s2
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-15
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Metal Shear
Model No./ Type: BJS130
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
Cd
Ni-MH
Li-ion

Produkt Specifikationer

Mærke: Makita
Kategori: En saks
Model: DJS130Z

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita DJS130Z stil et spørgsmål nedenfor, og andre brugere vil svare dig


En saks Makita Manualer

Makita

Makita DJS161RTJ Manual

12 September 2024
Makita

Makita DJS161RMJ Manual

16 August 2024
Makita

Makita DUP361ZN Manual

8 August 2024
Makita

Makita BJN160RFJ Manual

5 August 2024
Makita

Makita DJS161Z Manual

30 Juli 2024
Makita

Makita DUP362Z Manual

28 Juli 2024
Makita

Makita DJS130Z Manual

24 Juli 2024
Makita

Makita JN3201J Manual

24 Juli 2024

En saks Manualer

Nyeste En saks Manualer

Milwaukee

Milwaukee 48-44-0070 Manual

3 Oktober 2024
DeWalt

DeWalt DCS494 Manual

17 September 2024
Black And Decker

Black And Decker BCRC115 Manual

6 September 2024
Fein

Fein ABSS 18 1.6 E AS Manual

22 August 2024
Fein

Fein ABLS 18 1.6 E AS Manual

22 August 2024
Milwaukee

Milwaukee M12 2534-21 Manual

13 August 2024
Fein

Fein BSS 1.6 C Manual

8 August 2024
Black And Decker

Black And Decker SZ360 Manual

6 August 2024
DeWalt

DeWalt DCS491 Manual

4 August 2024
Hitachi

Hitachi CE16SA Manual

3 August 2024