Makita JN3201J Manual

Makita En saks JN3201J

Læs gratis den danske manual til Makita JN3201J (8 sider) i kategorien En saks. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Makita JN3201J, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Nibbler
JN3201
013354
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model JN3201
Steel up to 400 N/mm2 3.2 mm / 10 ga
Steel up to 600 N/mm2 2.5 mm / 13 ga
Steel up to 800 N/mm2 1.0 mm / 20 ga
Max. cutting capacities
Aluminum up to 200 N/mm
2 3.5 mm / 10 ga
Outside edge 128 mm
Min. cutting radius Inside edge 120 mm
Strokes per minute (min-1
) 1,300
Overall length 225 mm
Net weight 3.4 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE037-1
Intended use
The tool is intended for cutting sheet steel and stainless
sheet steel.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA) : 81 dB(A)
Sound power level (L
WA) : 92 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : cutting sheet metal
Vibration emission (ah) : 10.0 m/s2
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).

Produkt Specifikationer

Mærke: Makita
Kategori: En saks
Model: JN3201J

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita JN3201J stil et spørgsmål nedenfor, og andre brugere vil svare dig


En saks Makita Manualer

Makita

Makita DJS161RTJ Manual

12 September 2024
Makita

Makita DJS161RMJ Manual

16 August 2024
Makita

Makita DUP361ZN Manual

8 August 2024
Makita

Makita BJN160RFJ Manual

5 August 2024
Makita

Makita DJS161Z Manual

30 Juli 2024
Makita

Makita DUP362Z Manual

28 Juli 2024
Makita

Makita DJS130Z Manual

24 Juli 2024
Makita

Makita JN3201J Manual

24 Juli 2024

En saks Manualer

Nyeste En saks Manualer

Milwaukee

Milwaukee 48-44-0070 Manual

3 Oktober 2024
DeWalt

DeWalt DCS494 Manual

17 September 2024
Black And Decker

Black And Decker BCRC115 Manual

6 September 2024
Fein

Fein ABSS 18 1.6 E AS Manual

22 August 2024
Fein

Fein ABLS 18 1.6 E AS Manual

22 August 2024
Milwaukee

Milwaukee M12 2534-21 Manual

13 August 2024
Fein

Fein BSS 1.6 C Manual

8 August 2024
Black And Decker

Black And Decker SZ360 Manual

6 August 2024
DeWalt

DeWalt DCS491 Manual

4 August 2024
Hitachi

Hitachi CE16SA Manual

3 August 2024