Manhattan 207362 Manual

Manhattan Ikke kategoriseret 207362

Læs gratis den danske manual til Manhattan 207362 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Manhattan 207362, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

HUM DEBUGGER

Hum Eliminator

Congratulations on your purchase of the Electro-Harmonix Hum Debugger, Hum

Eliminator pedal. No matter what type of pickups you use or how loud you play, the

E-H Hum Debugger will clean up your signal chain so that hum will no longer

overtake your guitar signal. Simply connect the Hum Debugger to your guitar like

you would any other effects pedal and you are ready to eliminate hum from your

sound forever!

-CONTROLS and I/O JACKS-

NORMAL/STRONG TOGGLE SWITCH Sets the amount of Hum Elimination. In –

NORMAL mode the Hum Debugger removes only the odd harmonics from the hum

present in your signal. In STRONG mode the Hum Debugger removes both odd and

even harmonics from your signal’s hum content.

STATUS LED – When the LED is lit the Hum Debugger is active. When the LED is off

the Hum Debugger is in True Bypass mode.

FOOTSWITCH – Toggles the Hum Debugger between active and True Bypass

modes.

CONNECTIONS Connect your instrument to the INPUT Jack. Connect your –

amplifier or the rest of your effects chain to the AMP Jack.

POWER Plug the barrel connector from the AC Adapter that came with your Hum –

Debugger into the power jack at the top of the Hum Debugger. Plug the AC Adapter

into a solid wall outlet. You must use the AC Adapter that the Hum Debugger came

with and the AC Adapter must have an output of 7.5VAC with the ability to supply at

least 200mA of current.

WARNING: Use only the 7.5VAC/400mA AC adapter the

Hum Debugger comes supplied with. Do not use any other

AC adapters. Using other AC adapters, even those made by

Electro-Harmonix, could cause harm to the unit, the

adapter or your drummer. The Hum Debugger does not

use batteries.

-USING THE HUM DEBUGGER-

The Electro-Harmonix Hum Debugger requires no special tricks necessary when to

remove hum. You can use it like you would any other effects pedal. The only thing to

remember is you must use the AC Adapter that the Hum Debugger comes supplied

with.

When using the Hum Debugger first set the toggle switch to NORMAL mode.

NORMAL mode should work well in most situations. If you find that the Hum

Debugger is still letting some hum through then move the switch up to STRONG

mode, this should remove the rest of the hum.

If you use more effects pedals than just the Hum Debugger we advise that the Hum

Debugger be inserted at the beginning of the effects chain.

Produkt Specifikationer

Mærke:	Manhattan
Kategori:	Ikke kategoriseret
Model:	207362

Har du brug for hjælp?

Hvis du har brug for hjælp til Manhattan 207362 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Manhattan Manualer

Manhattan 102032 Manual

7 Juni 2025

Manhattan 207751 Manual

4 Juni 2025

Manhattan 102681 Manual

2 Februar 2025

Manhattan 168373 Manual

2 Februar 2025

Manhattan 130752 Manual

2 Februar 2025

Manhattan 461504 Manual

11 Januar 2025

Manhattan 153973 Manual

4 September 2024

Manhattan 190299 Manual

4 September 2024

Manhattan 180962 Manual

3 September 2024

Manhattan 461245 Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vulcan 1024W Manual

15 Juni 2025

Backyard Pro 554PL2030 Manual

15 Juni 2025

Haier 1U18TE2HDA Manual

15 Juni 2025

AEG EWKEXT1 Manual

15 Juni 2025

Planet XGPN-400AXV Manual

15 Juni 2025

Cadac 3 Cook Turbo Manual

15 Juni 2025

Bobrick B-3944 Manual

15 Juni 2025

Sony SZC-4008 Manual

15 Juni 2025

Watts ETX-15 Manual

15 Juni 2025

Sigma REMOTE ONE Manual

15 Juni 2025