Marshall Electronics AC-360-Z V2 Manual

Marshall Electronics Mikrofon AC-360-Z V2

Læs gratis den danske manual til Marshall Electronics AC-360-Z V2 (2 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Marshall Electronics AC-360-Z V2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Please

Note:

Thank You for Purchasing the Ultimate Zoom Room Microphone.

Quickstart Guide

• You do NOT need to use the 5V Power Supply when

only using a single unit.

• Each connected AC-360-Z V2 will display as 4

microphone devices in your computer’s settings.

To begin, make sure the following items are included in the box:

• 5V Power Supply

• Mounting Pads

• USB-C to USB-C Cable

• Right Angle USB-C Cable

• USB-C to USB-A Cable

• Right Angle USB-C to USB-A Cable

To use the AC-360-Z V2 as a single main unit

on your table or desk:

To use the AC-360-Z V2 as a single main unit

FIXED to your table or desk:

1. Pick your desired cable. RIGHT ANGLE USB

2. Use the OUT port on the microphone and connect to

your computer.

3. On your Zoom Room controller, navigate to the settings

menu, and select “MXL AC-360Z V2 (1)” as your

microphone source.

1. Pick your desired cable.STRAIGHT USB

2. Use the OUT port on the microphone, drop through hole

on table or mounting surface.

3. Unscrew removable rubber feet and apply included

mounting pads to bottom of unit.

4. Connect the AC-360-Z V2 to your computer.

5. On your Zoom Room controller, navigate to the settings

menu, and select “MXL AC-360Z V2 (1)” as your

microphone source.

For Customer Service and Support, Call MXL Tech Support at (800) 800-6608

• Each extension unit will require the 5V Power Supply.

• Daisy chain each extension microphone point to point.

• Each connected AC-360-Z V2 will display as 4 microphone

devices in your computer’s settings.

COMPUTER

INPUTS SHOWN

CONNECTED

AC-360-Z V2s

ZOOM ROOM CONTROLLER

MIC INPUTS SHOWN

To use the AC-360-Z V2 as an extension unit

on your table or desk:

To use the AC-360-Z V2 as an extension unit

FIXED to your table or desk:

1. Pick the RIGHT ANGLE USB-C to RIGHT ANGLE USB-C

cable.

2. Use the OUT port on the microphone and connect to the

EXT port on your main unit.

3. Connect the provided power supply to the extension unit.

4. Your Zoom Room controller will display, “MXL AC360V2 (2)”

as an available microphone source. Tap , followed by

the “Update to 2 Microphones” option.

5. [OPTIONAL] Repeat for a 3rd unit.

6. Your Zoom Room controller will display, “MXL AC360V2 (3)”

as an available microphone source. Tap , followed by

the “Update to 3 Microphones” option.

1. Pick your desired STRAIGHT USB-C to STRAIGHT

USB-C cable

2. Use the OUT port on the microphone, drop through hole

on table or mounting surface, connect to EXT port on your

main unit.

3. Connect the provided power supply to the extension unit.

4. Unscrew removable rubber feet and apply included mount-

ing pads to bottom of unit.

5. Your Zoom Room controller will display, “MXL AC360V2 (2)”

as an available microphone source. Tap , followed by

the “Update to 2 Microphones” option.

6. [OPTIONAL] Repeat for a 3rd unit.

7. Your Zoom Room controller will display, “MXL AC360V2 (3)”

as an available microphone source. Tap , followed by

the “Update to 3 Microphones” option.

MXL Microphones | 20608 Madrona Ave, Torrance, CA 90503 | (800) 800-6608 | uc.mxlmics.com V2.2

Extension Unit

Installation Guide

Please

Note:

Produkt Specifikationer

Mærke:	Marshall Electronics
Kategori:	Mikrofon
Model:	AC-360-Z V2
Type:	Konferencemikrofon
Bredde:	190.5 mm
Dybde:	190.5 mm
Højde:	33.5 mm
Produktfarve:	Hvid
USB-port:	Ja
Kabler inkluderet:	USB Type-C, USB Type-C to USB Type-A, USB Type-C to USB Type-C
Forbindelsesteknologi:	Ledningsført
Enhedsgrænseflade:	USB
Bæredygtighedscertifikater:	RoHS
Plug and play:	Ja
USB-stik type:	USB Type-C
Dimensioner (BxDxH) med stativ:	190.5 x 190.5 x 44.5 mm