Martin THRILL Compact PAR 64 LED Manual

Martin Lettelse THRILL Compact PAR 64 LED

Læs gratis den danske manual til Martin THRILL Compact PAR 64 LED (3 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Martin THRILL Compact PAR 64 LED, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
THRILL Compact PAR 64 LED
User Guide
WARNING!
Read the Safety and Installation Guide
supplied with this product before
installing or using this product.
Fixture overview
1
Multi-function bracket
7
AC Mains out
2
LED emitters
8
DMX In
3
Hand wheel
9
Secondary attachment point
4
IR receiver
10
User interface
5
AC Mains in
11
DMX Out
6
Microphone
12
Clamp attachment point
Using the control menu
The control menu is shown below. To
access the menu, press the MENU
button. Scroll through options with the ▼
(down) and ▲ (up) buttons. Press ENTER to select an option.
To return to a higher level in the menu, press MENU. To exit the
menu, press and hold MENU or wait a few seconds.
The default menu settings are shown in . bold
Menu
Sub-menu






 










Set xtures Client

















































DMX mode operation and settings
DMX channel mode ( )







The Compact PAR 64 LED has 2 DMX modes that use 6 or 9
channels. The 6-channel mode provides color mixing with 0-100%
control of each color: red, blue green, amber, white, and UV.
In 9-channel mode, the Compact PAR 64 LED provides color
mixing, 36 popular preset colors, full-range dimming, and strobe
effects. The DMX command tables list all functions and their values.
To set 6-channel or 9-channel DMX mode:
1. Press MENU to enter the control menu.
2. Scroll to . Press ENTER to conrm.
3. orScroll to the desired mode:  .
4. Press ENTER to save your selection.
DMX address ( )




A DMX controller uses either 6 or 9 DMX channels to control the
Compact PAR 64 LED. The DMX address is the rst channel
used. If xtures are set to 6-channel DMX mode and the rst
xture’s DMX address is set to 1, then it receives instructions on
DMX channels 1, 2, 3, 4, 5, and 6. The next xture could then
be set to a DMX address of 7.
For independent control, each xture must have its own unique
control channels. For symmetric control, identical xtures can be
set to the same DMX address.
Assign an address for the xture on the DMX controller. Then set
that address on the Compact PAR 64 LED as follows:
1. Press MENU to enter the control menu.
2. Scroll to . Press ENTER.
3. Scroll to the address that you assigned to the xture.
4. Press ENTER to save the address.
DMX state ( )




The xture runs in DMX mode whenever it receives DMX
signals. When there is no DMX signal, the xture can be set to
run in Show Mode ( ), black out ( or hold the last  ),
DMX values received ( ).  For Show Mode operation, DMX
state must be set to 


.
To select behavior when there is no DMX signal:
1. Select in the control menu and press ENTER.
2. Select the desired behavior: , or .,  
3. Press ENTER to save your selection.
DMX commands, 6-Channel Mode
Ch.
Value
Function
1
0-255
Red 0- 100%
2
0-255
Green 0- 100%
3
0-255
Blue 0- 100%
4
0-255
Amber 0- 100%
5
0-255
White 0- 100%
6
0-255
UV 0- 100%
DMX commands, 9-Channel Mode
Ch.
Value
Function
1
0-7
8-15
16-131
132 139-
140 181-
182 189-
190 231-
232 239-
240 247-
248 255-
Shutter
Closed
Open
Strobe, slow to fast
Open
Pulse, fast close/slow open
Open
Pulse, slow close/fast open
Open
Random strobe
Open
2
0-255
Dimmer, intensity 0- 100%
3
0-255
Red, intensity 0- 100%
4
0-255
Green, intensity 0-100%
5
0-255
Blue, intensity 0-100%
6
0-255
Amber, 0-100%
7
0-255
White, 0-100%
8
0-255
UV, 0-100%
9
0-10
11 15-
16 20-
21 25-
26 30-
31 35-
36 40-
41 45-
46 50-
51 55-
56 60-
61 65-
66-70
71 75-
76 80-
81 85-
86 90-
91 95-
96 100-
101 105-
106 110-
111 115-
116 120-
121 125-
126 130-
131 135-
136 140-
141 145-
146 150-
Color presets
O
Color 1
Color 2
Color 3
Color 4
Color 5
Color 6
Color 7
Color 8
Color 9
Color 10
Color 11
Color 12
Color 13
Color 14
Color 15
Color 16
Color 17
Color 18
Color 19
Color 20
Color 21
Color 22
Color 23
Color 24
Color 25
Color 26
Color 27
Color 28
Ch.
Value
Function
151 155-
156 160-
161 165-
166 170-
171 175-
176 180-
181 185-
186 190-
191 192-
193 214-
215 221-
222 243-
244 247-
248 251-
252 255-
Color 29
Color 30
Color 31
Color 32
Color 33
Color 34
Color 35
Color 36
O (no preset color)
Continuous color scroll, fast to slow
Color scroll stop
Reverse color scroll, slow to fast
Random colors, fast
Random colors, medium
Random colors, slow
Show mode operation and settings
Show mode lets you run a standalone light show without a DMX
controller. Shows can be triggered by sound, or automatically
triggered at eight speeds.
To enable Show Mode operation, set the DMX state setting to






.
Show selection ( )




Four shows are available. To select a preprogrammed show:
1. Press MENU to enter the control menu.
2. Scroll to and press ENTER.
3. Select and press ENTER.
4. Select a show from to , or select to disable  
Show Mode. Press ENTER.
Music trigger ( and )








The fixture’s built-in microphone triggers eect and color
changes in sync with music. To enable sound activation:
1. Select in the control menu and press ENTER.
2. Select to enable sound activation or to disable it. 
3. Press ENTER to save your selection.
To adjust microphone sensitivity for the volume of the music:
1. Turn on the music source and set it to the desired volume.
2. Select in the control menu and press ENTER.
3. Press ▼ or ▲ to decrease or increase the sensitivity level.
4. When the xture responds as desired, press ENTER.
Auto trigger speed ( )




To use auto trigger in Show Mode:
1. Turn o sound activation as described above.
2. Select in the control menu and press ENTER.
3. Scroll to . Press ENTER.
4. Select a trigger speed from 1 (slow) to 8 (fast). Press ENTER.
Master/client mode operation and settings
Up to 32 Compact PAR 64 LEDs can be linked in a chain and set to
master/ operation, where the rst Compact PAR 64 LED in client
the chain is set to operate as the “master” that controls the others.
This provides synchronized operation without a controller. Note:
There must be no one the chain.more than master in Set all
other connected xtures to operate . as clients
To the xture be master: set rst to the
1. Enter the and scroll Press control menu to . ENTER.
2. Scroll Press to . ENTER.
3. Set show as described mode options above.
To other xtures as :set clients
1. Enter the and scroll Press control menu to . ENTER.
2. Scroll Press to . ENTER.
Link the master and xtures in a chain, using DMX cable toclient
connect each fixture’s DMX OUT socket to the next fixture’s
DMX IN socket as described in the Safety and Installation Guide.
1
2
4
7
3
5
6
9
11
12
10
8
Other settings
LED display on/o ( )




To set the control panel’s LED display to be on all the time, or to
automatically sleep when not in use:
1. Select in the control menu and press ENTER.
2. Select and press ENTER.
3. Select (display on) or (display o when not in use). 
4. Press ENTER to save your selection.
LCD display inversion ( )




To invert the control panel’s LED display for easier reading:
1. Select in the control menu and press ENTER.
2. Select and press ENTER.
3. Select to invert the display.
4. Press ENTER to save your selection or MENU to escape.
Manual mode ( )




Eects can be set from the control panel. To keep the eect
settings, do not exit the menu.
See the 9-channel mode DMX table for command values. To set
eects from the control panel:
1. Enter the control menu and scroll to . Press ENTER.
2. Scroll to the color or eect to adjust. Press ENTER.
3. Press ▼ or ▲ to specify a value from 0 to 255 for the effect.
4. Press ENTER to set the eect.
5. Press MENU and repeat for the other colors or eects.
Auto test ( )




To test all of the xture functions select and press 
ENTER. Press MENU to exit the test routine.
Fixture readouts
Hours: To display the fixture’s total operating hours select 
and press ENTER. Press MENU to exit.
Firmware: To display the rmware version number, select 
and press ENTER. Press MENU to exit.
Settings reset
To return all user settings to the factory default values, select
 in the control menu. Press ENTER to conrm or MENU to
escape.
Remote control operation
The remote control works with all Compact PAR 64 LED xtures
within range.
To operate the Compact PAR 64 LED with the remote control:
1. Verify that the xture is not connected to a DMX controller.
2. Press MENU to enter the control menu.
3. Scroll to and press ENTER.
4. Select and press ENTER.
5. Select to disable Show Mode. Press ENTER .
6. To execute commands, point the remote control towards the
front of the xture and the press corresponding button. See
table below.
Remote Control Commands
Replacing the wireless remote control battery
The wireless remote control uses a single CR 2025
coin/button/cell 3 V lithium battery. To replace the battery:
1. Depress the battery tray lock on the reverse of the remote
control and slide out the battery tray. Remove the old battery.
2. Insert a fresh battery with the positive terminal towards the
back of the remote. A diagram on the remote control
indicates the correct orientation.
3. Align the battery tray to the remote control and re-insert the
tray ensuring that the locking mechanism is secure.
4. Dispose of used batteries in accordance with local regulations.
If the coin/button/cell battery compartment does not close securely, stop
using the product and keep away from children and animals. Contact
Martin Professional for service and support.
Troubleshooting
Symptom
Potential Causes
Remedies
No light from
xture, control
panel dead
Power supply issue
such as blown fuse,
faulty connector or
damaged cable
Ensure that the mains
supply is connected
and supplying power
to the xture
Check all power
connections and
cables
Check and if
necessary replace the
fuse
Fixture does not
respond to DMX
control
Fault in the DMX
network due to
connector or cable
damage, incorrect
DMX addressing, or
signal interference
Ensure that fixture’s
DMX address
matches address set
on DMX control
device
Check DMX cables
and connections
Ensure that DMX link
is terminated
Reduce number of
xtures on DMX link
Attempt to control the
xture with another
DMX control device
Move or shield link if it
is close to unshielded
high-voltage cables
Fixture does not
respond in Show
Mode
Fixture set to run
as client
Change master/
client setting master
Sound trigger
disabled
Enable sound trigger
Show Mode disabled
or no show selected
Change DMX state
setting to Show Mode
Select a show
Microphone
sensitivity too low
Increase sensitivity

Fixtures don’t
respond in
master/client
mode
Fixture receiving
multiple control
signals
Disconnect or turn o
DMX controller
Verify there is only
one xture master
xture
No master xture
Set rst xture in
chain as master
Fixture does not
respond to remote
control
Remote control out of
range
Move closer to xture
Battery exhausted
Replace battery
Incorrect menu
settings
Verify show mode is
disabled ( - )  = 
Button
Function
BL
Toggle LEDs on/o
SP
Adjust speed (4 levels). Use with JU, FA, and SU.
Dimming (4 levels)
FL
Strobe (4 speeds)
R
Adjust Red intensity (o, 4 levels)
G
Adjust Green intensity (o, 4 levels)
B
Adjust Blue intensity (o, 4 levels)
W
Adjust White intensity (o, 4 levels)
A
Adjust Amber intensity (o, 4 levels)
UV
Adjust UV intensity (o, 4 levels)
JU
Jump Mode snaps thru pre-programmed colors. –
Adjust speed with SP.
FA
Fade Mode Fades thru pre-programmed colors. –
Adjust speed with SP.
AU
Auto-trigger mode.
SU
Music-triggered Sound Mode. Adjust sensitivity level
with SP.
CM+
Next color
CM-
Previous color
Information subject to change without notice. HARMAN
Professional Inc. disclaims liability for any injury, damage, direct
or indirect loss, consequential or economic loss or any other loss
occasioned by the use of, inability to use or reliance on the
information contained in this document.
©2017 HARMAN Professional Inc. All rights reserved. Martin® is a
registered trademark of HARMAN Professional Inc. registered in the
United States and other countries. Features, specications, and
appearance are subject to change without notice.
HARMAN Professional Inc.
8500 Balboa Boulevard • Northridge, CA, USA • 91329
www.martin.com
Document revision: B
IN INOUT OUT IN OUT IN OUT

Produkt Specifikationer

Mærke: Martin
Kategori: Lettelse
Model: THRILL Compact PAR 64 LED

Har du brug for hjælp?

Hvis du har brug for hjælp til Martin THRILL Compact PAR 64 LED stil et spørgsmål nedenfor, og andre brugere vil svare dig


Lettelse Martin Manualer

Martin

Martin ERA 700 Performance IP Manual

29 August 2024
Martin

Martin Thrill Vertical Fogger Manual

23 August 2024
Martin

Martin Extube Manual

22 August 2024
Martin

Martin MUM Manual

22 August 2024
Martin

Martin Freekie Manual

22 August 2024
Martin

Martin P3-100 Manual

21 August 2024
Martin

Martin THRILL Multi-FX LED Manual

21 August 2024
Martin

Martin Fixture Beam Analyzer Manual

21 August 2024
Martin

Martin MAC Ultra Wash Manual

21 August 2024
Martin

Martin RUSH MH 4 Beam Manual

21 August 2024

Lettelse Manualer

Nyeste Lettelse Manualer

Schwaiger

Schwaiger CALE100 511 Manual

9 April 2025
ADB

ADB Orkis Fresnel Manual

8 April 2025
Claypaky

Claypaky Actoris ParLED Manual

8 April 2025
ET2

ET2 Waterfall E24846-90 Manual

8 April 2025
Dainolite

Dainolite V166-1W Manual

5 April 2025
Dainolite

Dainolite OFE-161P Manual

5 April 2025
Dainolite

Dainolite DMLED10-A-5D Manual

5 April 2025
Dainolite

Dainolite DM1958F Manual

5 April 2025
NUVO

NUVO Ballerina 60/1265 Manual

4 April 2025
NUVO

NUVO SF77/196 Manual

4 April 2025