Media-Tech MT1504 Manual

Media-Tech Controller MT1504

Læs gratis den danske manual til Media-Tech MT1504 (8 sider) i kategorien Controller. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Media-Tech MT1504, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ation appears. If your system doesn’t launch

the installation software automatically, please

ﬁ nd the auto execute ﬁ le “setup.exe”, which is

located under the directory of your CD drive

and click on it, then follow the on-screen in-

struction to install the ROGUE MT1504.

3. Upon completing software installation, restart

your PC.

B. Hardware Installation

1. Plug-in your ROGUE MT1504 connector to ei-

ther one USB Port or USB Hub of your compu-

ter and make sure it is ﬁ rmly connected.

2. After the ROGUE MT1504 is connected, the

monitor will shows “Find a new hardware” and

the standard USB driver will be located for you

to ﬁ nish the easy installation and play games

immediately.

3. The system will add an item of stick in the

game-controller board automatically, and

you can test the function of gamepad buttons

and vibration.

Introduction

Thank you for choosing the ROGUE MT1504

Gamepad. This device is an advanced game con-

trol system designed with full ergonomics and

equipped with well-positioned buttons to en-

sure your game play comfortably. Moreover it is

built with two motors for actual vibration while

playing games.

In order to ﬁ t your game play, please take a mo-

ment to read the user’s guide. This user’s guide

provides you the necessary information for eas-

ily installing and basic operating this power-

ful gamepad under Microsoft Windows XP and

Vista.

Package Contents

1. ROGUE MT1504 gamepad

2. Software disc

3. User’s guide

System Requirements

1. IBM PC 586/PentiumII compatibles or higher

Available USB port or extension active USB hub

3. CD-ROM drive

4. Microsoft Windows XP/Vista recommended

Installation

Attention: Always install the software ﬁ rst be-

fore hardware installation.

A. Software Installation

Disc which comes together witch ROGUE

MT1504 contains the software needed for your

device setup. However, if you don’t install this

driver, ROGUE MT1504 will be operated without

vibration function.

1. Insert driver CD disc into your CD-ROM drive

and wait for a few seconds for your computer

to load the disc.

2. If your system is setup to automatically read a

new inserted CD, then the auto run program

is executed and the opening screen for install-

ROGUE

User’s Guide

Vibration Force Gamepad

MT1504

Troubleshoting

1. ROGUE MT1504 is properly plugged into the USB

port but does not work.

Please remove ROGUE MT1504 and all other game

drivers from the system and install software drive

once again. Sometimes there is a conﬂ ict between

foreign drivers. If you plug ROGUE MT1504 in to

passive USB hub and ROGUE MT1504 does not

work please plug in to active USB hub or direct

USB port in your computer.

2. Not every game requires all functioning buttons

(12 buttons) on your ROGUE MT1504. If you ﬁ nd

some buttons no working inside the game, please

check the game setting again.

3. The function of the gamepad buttons may vary

in diﬀ erent games. Before proceed with game

setting, whatever through the ROGUE MT1504

or from the OPTION inside the game, always read

your game manual carefully to approach the best

game setting.

4. Gamepad buttons conﬁ guration depends from

game type. Please read game manual for game

devices support.

Produkt Specifikationer

Mærke:	Media-Tech
Kategori:	Controller
Model:	MT1504
Vægt:	177 g
Produktfarve:	Blå
Forbindelsesteknologi:	Ledningsført
Kompatible operativsystemer:	Windows XP/Vista 32, PS3
Antal knapper:	12
Enhedstype:	Gamepad
Turbo:	Ja
Refleks vibration:	Ja