Media-Tech MT1510 Manual


Læs gratis den danske manual til Media-Tech MT1510 (2 sider) i kategorien Controller. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Media-Tech MT1510, eller vil du spørge andre brugere om produktet?

Side 1/2
Installation steps
Battery installation
Put 3xAAA alkaline battery according to polarization
marks.
Driver installation
First install driver, then plug USB receiver into PC
computer. Put software CD in to CD-ROM driver and
follow on-screen messages. When driver is successfully
installed you can plug USB receiver into USB port and
switch on the pad. Windows new hardware wizard will
install new device.
Digital buttons
only
Digital buttons
only
Manipulators (can work in analog or
digital mode)
USB RF receiver
Analog mode on/o
Analog LED Power LED
Battery compartment
(3xAAA alkaline battery)
Power on/o switch Vibration on/o switch
Digital buttons only
Using the device
Plug USB receiver into USB port of PC computer, then
switch ON pad. Both LED will blink, when pad
automatically connects to USB receiver - power LED will
be constantly on. You can switch device into analog
mode, press Analog button – Analog LED will be
constantly on. You can use Vibration switch to manually
turn on/o vibration function.
You can use game controllers/windows control panel to
check the device.
Due to continuous development specication and appearance of product are subject to
change without prior notice. For technical support please visit www.media-tech.eu.


Produkt Specifikationer

Mærke: Media-Tech
Kategori: Controller
Model: MT1510

Har du brug for hjælp?

Hvis du har brug for hjælp til Media-Tech MT1510 stil et spørgsmål nedenfor, og andre brugere vil svare dig