Meliconi Facile TV.1 Manual

Meliconi Fjernbetjening Facile TV.1

Læs gratis den danske manual til Meliconi Facile TV.1 (6 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Meliconi Facile TV.1, eller vil du spørge andre brugere om produktet?

Side 1/6
Facile TV.1
Thank you for choosing a Meliconi remote control.
The Facile remote control is designed to command a television. TV.1
Its ergonomic shape and soft rubber body make it easy to grip and protect it from shocks and drops.
By LEARN function, you can capture and store infrared signals from other remotes and match at will to one or more buttons.
It is also designed to be connected to the PC / TABLET / SMARTPHONE via MELICONI audiocable (included in the
package) in order to download the latest information to it activation. s
The MELICONI remote control reproduces infrared signals corresponding to the original; the functions that operate in radio
frequency (e.g. voice commands and pointers) are not supported.
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
The remote control requires 2 new 1.5V alkaline batteries, not included in the AAA/LR03
package. Insert with the correct polarity as shown in gure.
DO NOT use batteries. rechargeable
BATTERIES TEST: Press and hold the 5 button and check that the LED remains on
continuously until the button is released. If the light is o or blinks, the inserted batteries are low,
therefore they need replacement.
Before using the remote control, for each device you wish to control, it is to set a it matched. essential specic code,
Identify the specic code and set it into the remote control using one of the following ways:
Use the -code on the side or connect to the page and follow the instructions. qr www.cme.it
Once you have found the specic code for your device, set it in the remote control as described in the
ENTERING THE CODE DIRECTLY chapter.
SMARTPHONE - TABLET - WEB
MANUAL
SEARCH
SMARTPHONE
TABLET - WEB
ACTIVATION OF REMOTE CONTROL
Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control
INSERTING THE BATTERIES
SAFETY WARNINGS
The remote control and batteries should not be exposed to excessive heat such as sunlight, re
or the like.
The product . Keep out of reach of children or domestic animals. is not a toy
ATTENTION : searching for the suitable code could last up to 5 minutes.
Stand in front of the device to be controlled and make sure it is ON (not in stand-by). If necessary, switch
it on using the original remote control (if this is still working) or the buttons present on the device itself. (on
TVs they can be on the side or the top)
On the MELICONI remote control press and the butt until the LED of the remote control hold on
lights up; lease. re
Pointing the remote control towards the device, PRESS AND HOLD button and wait the ON/OFF
(even up to 5 minutes) for the device to switch o.
the device turn o IMMEDIATELY RELEASE the button. PAY ATTENTION, when ,
Three nal ashes indicate that the operation has been completed successfully.
(only to be performed if you know the to be set) specic code
On the MELICONI remote control press and hold the button until the LED lights up; release.
Immediately enter the previously identied specic code.
Three nal ashes indicate that the operation has been completed successfully.
For any future activation of the remote control, it is advisable to extract and note the code in use, operate as follows:
On the MELICONI remote control press and hold the button until the LED lights up; release.
Enter the code . 0010
After a pause of several seconds, the LED produces four sets of ashes, spaced out,
corresponding to the code to be obtained. Count the number of ashes. Each set of ashes
corresponds to one digit in the code. Ten flashes correspond to the digit zero “0”.
( code obtained = example 1701)
Make a note of the code obtained. You may need it in future.
DISPLAY CODE IN USE
If the remote control does NOT carry out the three nal ashes, the setting is NOT successful; repeat the procedure.
If still unsuccessful, it means that the code is not included in the remote control, contact the ASSISTANCE.
ENTERING THE CODE DIRECTLY
VERIFY
Check that the MELICONI remote control operates your device the main functions if it does not, the in ; REPEAT
procedure.
NOTE: When the list of codes to be searched is over, the remote control exits the search and the LED remains o.
If no results are obtained, try using the procedure described in the SMARTPHONE - TABLET - WEB chapter or contact
the ASSISTANCE.
MANUAL SEARCH
watch
the video
watch
the video


Produkt Specifikationer

Mærke: Meliconi
Kategori: Fjernbetjening
Model: Facile TV.1

Har du brug for hjælp?

Hvis du har brug for hjælp til Meliconi Facile TV.1 stil et spørgsmål nedenfor, og andre brugere vil svare dig