Meliconi fully 8 Manual

Meliconi Fjernbetjening fully 8

Læs gratis den danske manual til Meliconi fully 8 (4 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Meliconi fully 8, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Fully 8 RC

Keep this booklet for future reference.

Thank you for choosing a Meliconi remote control.

The FULLY 8 RC universal remote control is ideal for replacing up to 8 remote controls of any brand for TV, Digital Terrestrial

(TER), Satellite (SAT) Decoders, DVD players (including Blu Ray), Videotape recorders (VCR), Personal video recorders

(PVR), cable TV (CAB), other audio video equipment (AUX) or decoders for ADSL TV (ADSL). The remote control has a non-

volatile memory, meaning that it does not lose its settings even if there are no batteries in it.

IMPORTANT: the device must not be exposed to excessive heat sources.

USE OF THE BUTTONS AND FUNCTIONS

The functions of the buttons described below are available only if they are also present on the original remote control.

Volume control +/–

TELETEXT buttons

ON/OFF switches the device OFF and

in some cases ON

Numeric keypad

Conﬁ rm selection

MUTE

turns sound OFF and ON

For selecting an external input

source

For selecting the next programme P+

or the previous programme P–

For moving around within the MENU

Fastext functions or for selecting

sub-menus using colours

Buttons for selecting the device to be

controlled.

DVD/PVR RECORD PAUSE STOP PLAY

buttons

DVD and PVR forward/back functions

Speciﬁ c buttons for decoder

Displays the list of programmes

Selects analogue/digital

Selects digital TV and radio

INSERTING THE BATTERIES

The remote control requires 2 new 1.5V alkaline AAA/LR03 batteries.

Insert them as illustrated.

Try pressing a number button and check that the red light remains lit

continuously until you release the button: if the light ﬂ ashes, the batteri-

es inserted are not charged and are about to go ﬂ at, therefore you must

substitute them.

Do not leave ﬂ at batteries inserted, as liquid may leak and damage the remote control

The Fully 8 RC remote control is a universal remote, so its memory contains data relating to numerous devices of various

brands available on the market.

Each original device has a speciﬁ c code which must be used to set up the remote control.

Therefore, to use your Fully 8 RC you must enter the speciﬁ c code for each device you wish to control.

So use one of the following methods to identify the correct code and set it in your remote control:

A) - INTERNET (recommended)

B) - CELL PHONE (SMS)

C) - MANUAL SEARCH

SETTING CODES

If you have an Internet connection available, follow the on-line guide on the www.meliconi.com/guida website to identify

the speciﬁ c codes for the devices you wish to command. Then set the codes manually in your MELICONI remote control

as described in the ENTERING THE CODE DIRECTLY procedure.

SETTING CODES USING INTERNET

Today, Meliconi gives customers who don’t have internet the chance to receive the codes for programming their remote

control directly on their cell phone.

Simply send an SMS to this number 0039 345 7518893 as follows: 8A, Type, Brand, Model

- Type = indicate the device to be controlled using one of the following abbreviations: TV - SAT - DVD - VCR - TER

(Digital Terrestrial decoder) - AUX (other audio video device).

- Brand, Model = to indicate the brand and the model of the device to be controlled.

Example: 8A, TV, PHILIPS, 32PFL3614 (if you don’t know the model, don’t write anything after the brand).

Once you have received the SMS with the list of codes, set the ﬁ rst code in the remote control as described in the

ENTERING THE CODE DIRECTLY section.

Stand in front of the device with the MELICONI remote control. Turn the device on and then press the OFF button on the

remote (or the PLAY button if the device is a VCR/DVD).

If the device does NOT switch off (or if the VCR/DVD does not start playing), try setting the consecutive code in the SMS

list in the remote control.

When the device reacts check whether the other buttons are operating correctly too.

If they do, the remote control is ready to use.

If they don’t, you are probably using an incorrect code destined for a very similar device; at this point ignore the

SMS list and consult the SETTING CODES USING A MANUAL CODE section to ﬁ nd a more suitable code.

SETTING CODES USING A CELL PHONE

NOTE: If you don’t receive an SMS on your cell phone or if the message says ERROR / NO CODE, it means the

system has not been able to process the data you have sent; Do not try sending another SMS use the MANUAL

SEARCH instead.

Produkt Specifikationer

Mærke:	Meliconi
Kategori:	Fjernbetjening
Model:	fully 8

Har du brug for hjælp?

Hvis du har brug for hjælp til Meliconi fully 8 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Fjernbetjening Meliconi Manualer

Meliconi fully 8 Manual

12 Januar 2025

Meliconi gumbody light facile Manual

23 September 2024

Meliconi universal 4 Manual

22 September 2024

Meliconi Pratico 2 Manual

18 September 2024

Meliconi Personal 2 plus Manual

29 August 2024

Meliconi Speedy 2.1 Manual

21 August 2024

Meliconi GumBody Light Manual

21 August 2024

Meliconi Pratico 2.1 Manual

20 August 2024

Meliconi Gumbody Personal 7 plus Manual

20 August 2024

Meliconi Gumbody Personal 2 Manual

20 August 2024

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

Absima CR7P Manual

29 September 2025

Insignia NS-RMTSNY21 Manual

29 September 2025

Insignia NS-RMT8D21 Manual

29 September 2025

ProMaster PRO5439 Manual

29 September 2025

Insignia NS-RMTVIZ21 Manual

29 September 2025

ProMaster PRO7599 Manual

29 September 2025

ProMaster PRO1782 Manual

29 September 2025

ProMaster PRO7337 Manual

29 September 2025

ProMaster PRO7606 Manual

29 September 2025

Neets 310-0350 Manual

29 September 2025