Meliconi Pratico 2 Manual

Meliconi Fjernbetjening Pratico 2

Læs gratis den danske manual til Meliconi Pratico 2 (5 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Meliconi Pratico 2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Thank you for choosing a Meliconi remote control.

Keep this booklet for future reference.

The Pratico 2 remote control is ideal for replacing up to 2 remote controls for TV - SAT (satellite decoder) - TER

(Digital Terrestrial decoder). It can also be connected to a PC using the Meliconi audio cable (to be purchased

separately), thereby allowing the user to download the most up-to-date conﬁ guration information. The remote

control has a non-volatile memory, meaning that it does not lose its settings even if there are no batteries in it.

IMPORTANT: The remote control must not be exposed to excessive heat sources.

USE OF THE BUTTONS AND FUNCTIONS

The functions of the buttons described below are available only if they exist on your device.

ON / OFF switches the device OFF and

in some cases ON

Buttons for selecting the device to

be controlled

Numeric keypad

Selects digital TV and radio

Volume control +/–

For selecting an

external input source

Conﬁ rm selection

For selecting the next programme

P+ or the previous programme P–

Fastext functions or for selecting sub-menus

using colours

TELETEXT buttons

Speciﬁ c buttons for decoder

For moving around within the MENU

MUTE turns sound OFF and ON

Selects

analogue/digital

Displays the list of programmes

The Pratico 2 remote control is a universal remote with a memory containing data regarding numerous devices

produced by different brands on the market.

Each original device has a speciﬁ c code which must be used to set up the remote control.

So to use the Pratico 2 you must enter the speciﬁ c code for each device you wish to control.

So use one of the following methods to identify the correct code and set it in your remote control:

A) - INTERNET (recommended)

B) - CELL PHONE (SMS)

C) - MANUAL SEARCH

SETTING CODES

If you have an Internet connection available, follow the on-line guide on the www.meliconi.com/guide website

to identify the speciﬁ c codes for the devices you wish to command. Then set the codes manually in your

MELICONI remote control as described in the ENTERING THE CODE DIRECTLY procedure.

SETTING CODES USING INTERNET

Today, Meliconi gives customers who don’t have internet the chance to receive the codes for programming their

remote control directly on their cell phone.

Simply send an SMS to this number 0039 345 7518893 as follows: 2B, Type, Brand, Model

- Type = indicate the device to be controlled using one of the following abbreviations: TV - SAT - TER

(terrestrial decoder)

- Brand, Model = to indicate the brand and the model of the device to be controlled.

Example: 2B, TV, PHILIPS, 32PFL3614 (if you don’t know the model, don’t write anything after the brand).

Once you have received the SMS with the list of codes, set the ﬁ rst code in the remote control as described in

the ENTERING THE CODE DIRECTLY section.

Point the MELICONI remote control at the device, which should already be ON and press the ON/OFF button.

If the device does NOT switch off, try setting the consecutive code in the SMS list on the remote control.

SETTING CODES USING A CELL PHONE

(the service s fee and the only cost is that of sending the SMS,

which naturally depends on the rates of the service operator in question)

Before using the remote control, insert the batteries and programme it.

INSERTING THE BATTERIES

The remote control requires 2 new 1.5V alkaline AA/LR06 batteries. Insert

them as illustrated.

Try pressing a number button and check that the red light remains lit

continuously until you release the button. If the light ﬂ ashes, the batteries

inserted are not charged and are about to go ﬂ at, therefore you must

substitute them.

Do not leave ﬂ at batteries inserted,

as liquid may leak and damage the remote control

Produkt Specifikationer

Mærke:	Meliconi
Kategori:	Fjernbetjening
Model:	Pratico 2

Har du brug for hjælp?

Hvis du har brug for hjælp til Meliconi Pratico 2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Fjernbetjening Meliconi Manualer

Meliconi fully 8 Manual

12 Januar 2025

Meliconi gumbody light facile Manual

23 September 2024

Meliconi universal 4 Manual

22 September 2024

Meliconi Pratico 2 Manual

18 September 2024

Meliconi Personal 2 plus Manual

29 August 2024

Meliconi Speedy 2.1 Manual

21 August 2024

Meliconi GumBody Light Manual

21 August 2024

Meliconi Pratico 2.1 Manual

20 August 2024

Meliconi Gumbody Personal 7 plus Manual

20 August 2024

Meliconi Gumbody Personal 2 Manual

20 August 2024

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

Essentiel B Listo Manual

18 Juni 2025

Savio RC-23 Manual

7 Juni 2025

Sony RM-BR300 Manual

6 Juni 2025

Philips Prestigo SRU6006 Manual

4 Juni 2025

GBS All For You Manual

4 Juni 2025

Sony RM-AV2 Manual

3 Juni 2025

Rockford Fosgate Punch PEQ Manual

1 Juni 2025

Autel Smart Controller SE Manual

27 Marts 2025

Metronic Zap 2 495383 Manual

26 Marts 2025

Ikea RODRET 405.597.98 Manual

13 Marts 2025