Meliconi SPEEDY 2 COMBO Manual

Meliconi Fjernbetjening SPEEDY 2 COMBO

Læs gratis den danske manual til Meliconi SPEEDY 2 COMBO (4 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 79 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 40 anmeldelser. Har du et spørgsmål om Meliconi SPEEDY 2 COMBO, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
17
This universal remote control has the essential functions for the simplified use of an analogue or a digital
television combined with a satellite or terrestrial decoder - without having to switch between one appliance and
another. The dark blue buttons transmit the commands to the decoder while the light blue buttons control the
functions that correspond to the TV. If used with a digital TV, all the buttons control the same appliance.
BUTTON AND FUNCTION USE
FITTING THE BATTERIES
GB
Before programming and using the remote control, fit the batteries.
The remote control requires 2 new 1.5 V AAA/LR03 alkaline batteries. Insert the batteries as shown:
• The batteries must be changed once a year.
• Replace the batteries if the indicator light on the remote control starts to
flash during use. The batteries are low.
• This remote control has a permanent memory and does not lose the
programmed codes when the batteries are removed.
• Make a note of the code for your appliances on the adhesive label found
inside the battery cover. This note will be handy if you have to reprogram
your remote control.
Warning: do not expose the remote control to sources of excessive heat
Keep your Instructions Booklet for future reference.
To select the next programme.
Interrupts and restores the TV audio.
To reduce the TV's audio volume.
Numeric keypad.
Indicator light.
Button to exit the Teletext
and return to normal viewing.
TV ON button which is occasionally
needed to turn the TV on
To increase the TV's audio volume.
To select an external input
terminal to the TV.
Button to access the Teletext.
To select the previous programme.
ON/OFF to turn OFF the TV
and in some cases to turn it ON.
Thank you for choosing MELICONI.
OFF to turn the decoder off (STB).
18
HOW TO PROGRAMME THE REMOTE CONTROL
- - Turn on the TV and select a programme.
- Simultaneously hold down the and buttons for 5 seconds until the upper indicator light starts to flash
indicating that the remote control is in the programming state.
- Release the buttons and enter the code 0001 within 12 seconds. The indicator light begins flashing more
quickly, indicating that the remote control is ready for the search.
- Point the remote control towards the TV. Press and slowly release the button several times, stopping when
the appliance goes off (you may need to press the button a few dozen times).
- When the appliance goes off, press the button to confirm. Three long flashes indicate that the
operation has been completed successfully.
To command your appliances, you must programme your Speedy 2 COMBO as described in the next
paragraph. For those who can connect to the internet website www.meliconi.com, you will find interactive
instructions for a faster and easier programming of your remote control.
PREPARE FOR USE
Read these instructions carefully before programming your remote control!
- Turn on the appliance and select a programme.
- Simultaneously hold down the and buttons for 5 seconds until the upper indicator light starts to flash
indicating that the remote control is in the programming state.
- Release the buttons and enter the code 0001 within 12 seconds. The indicator light begins flashing more
quickly, indicating that the remote control is ready for the search.
- Point the remote control towards the appliance. Press and slowly release the button several times,
stopping when the appliance goes off (you may need to press the button a few dozen times).
- When the appliance goes off, press the button to confirm. Three long flashes indicate that the
operation has been completed successfully.
- Turn on the TV and select a programme.
- Turn on the TV and select a programme and buttons for 5 seconds until the upper indicator light
starts to flash indicating that the remote control is in the programming state.
- buttons for 5 seconds until the upper indicator light starts to flash indicating that the remote control is in the
programming state.
- Point the remote control towards the appliance. Press and slowly release the button several times,
stopping when the appliance goes off (you may need to press the button a few dozen times).
- When the appliance goes off, press the button to confirm. Three long flashes indicate that the
operation has been completed successfully.
If you have an analogue TV and an external decoder, follow procedure A and then procedure B. Follow procedure
C if you have a digital TV.
Additional check
Check that some of the other buttons, corresponding to those on your original remote control, work correctly.
If the commands function incorrectly or erratically, you have probably entered a code for a similar but different
remote control. In this case, repeat the search procedure starting from point 3.
ANALOGUE TV PROGRAMMING
DECODER PROGRAMMING
DIGITAL TV PROGRAMMING

Produkt Specifikationer

Mærke: Meliconi
Kategori: Fjernbetjening
Model: SPEEDY 2 COMBO

Har du brug for hjælp?

Hvis du har brug for hjælp til Meliconi SPEEDY 2 COMBO stil et spørgsmål nedenfor, og andre brugere vil svare dig


Fjernbetjening Meliconi Manualer

Meliconi

Meliconi fully 8 Manual

12 Januar 2025
Meliconi

Meliconi gumbody light facile Manual

23 September 2024
Meliconi

Meliconi universal 4 Manual

22 September 2024
Meliconi

Meliconi Pratico 2 Manual

18 September 2024
Meliconi

Meliconi Personal 2 plus Manual

29 August 2024
Meliconi

Meliconi Speedy 2.1 Manual

21 August 2024
Meliconi

Meliconi GumBody Light Manual

21 August 2024
Meliconi

Meliconi Pratico 2.1 Manual

20 August 2024
Meliconi

Meliconi Gumbody Personal 7 plus Manual

20 August 2024
Meliconi

Meliconi Gumbody Personal 2 Manual

20 August 2024

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

Renkforce

Renkforce RF-PLP-202 Manual

14 August 2025
Renkforce

Renkforce RF-5253052 Manual

14 August 2025
Renkforce

Renkforce RF-WRC-300 Manual

14 August 2025
Renkforce

Renkforce RF-PLP-200 Manual

14 August 2025
One For All

One For All EazyClean URC 9290 Manual

13 August 2025
One For All

One For All URC 2781 Manual

13 August 2025
One For All

One For All Digital 5 URC 7557 Manual

12 August 2025
Chamberlain

Chamberlain CH382C Manual

12 August 2025
One For All

One For All Essence 4 URC 1242 Manual

12 August 2025
One For All

One For All Essence 8 URC 1282 Manual

12 August 2025