Merlin PureAir Manual

Merlin Luftfugter PureAir

Læs gratis den danske manual til Merlin PureAir (3 sider) i kategorien Luftfugter. Denne vejledning er vurderet som hjælpsom af 87 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 44 anmeldelser. Har du et spørgsmål om Merlin PureAir, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
1
Power button
Mode key
Red- Once the power button is pressed the
red LED will light up. If it is pressed again
the unit will switch o.
Red/blue/green – After the unit is switched
on the air quality will be tested. The light will
change color between “red, blue and green”
for 2 minutes. It will stop ashing when the
air quality sensor has heated up.
Blue – If the intelligence mode button is
pressed during start-up this mode will be enabled
and the blue LED will switch on. If the button is
pressed again the unit will enter in manual mode.
Green- In manual mode when the wind speed
button is pressed, the green light will light up and
the fan’s speed will go to high. If the button is
pressed again the fan speed will go to slow speed.
Yellow- After the PureAir has operated for 1000 hours
the orange light LED will light up. This indicates the
lter screen needs to be replaced. Once the lter
screen is replaced press the wind speed button
for 3 seconds to clear the yellow LED.
Quick start:
1. Insert the on-board
charger into the
bottom power supply
interface of the PureAir.
2. Place the PureAir, with
power cable attached,
securely in the vehicle’s
cup holder.
3. Insert the charger into
the cigarette light
socket of the vehicle.
4. Press the power
button for the unit to
start.
5. Press the mode button
to select the dierent
purifying modes.
Full instruc�ons:
LED indicators.
Thank you for purchasing this Merlin Product. Please read the
instruction manual carefully before using the product.
The documentation provided will allow you to fully enjoy all
the features this unit has to oer.
Please save this manual for future reference.
Instruc�ons:
PureAir
2 43 5 61 7 8
10
12
11
13
9
1
4
7
10
13
2
5
8
3
6
9
11 12
Pow er indicator ligh t
Wind speed indicator light
Wind speed key
Pow er switch Sma rt mod e key Sma rt mod e ind ic a tor light
Maintena nce indicator light
Air outlet Pow er interface
Air quality detection hole
Air inlet Installa tion r egiste r mark
Wiring trough of power line
2
LIMITED WARRANTY
Merlin Products are covered by a limited one-year
warranty policy. If the product suers from a
manufacturing defect, the customer will receive a
replacement if claimed within 15 days of the purchase
date. Otherwise, the product will be inspected for
possible repair options. The product will either be
repaired and returned free of charge, or replaced. All
repair services past the one-year warranty period will
be charged for any repairs that need to be made.
If the client is located outside the UAE, or is otherwise
unable to personally deliver the defective product to
our service center or retail outlets, he/she may send it
via post at his/her own cost. The repaired/replaced
product will then be returned to the client via courier
mail at Merlin’s cost, as long as the warranty period is
still active.
Important: This limited warranty DOES NOT COVER
normal wear and tear, accidents, damage during
transit, misuse, abuse or neglect. Attempting to
disassemble the unit will render the warranty null and
void.
Replacing the filter screen.
a.) Firmly hold the two metal parts of the unit. Gently turn it
in opposite directions. The unit will separate in to two units.
Turn over the top part of the unit and place on a table. The
lter is in that assembly. Remove the old lter and replace
with a new one.
b.) To reassemble please located the two dots on the back
of each of the parts of the unit. Insert the two pieces into
each other with the dots in close proximity. Gently turn the
two pieces again unit it locks. Please do not force this
action. It is a very gentle action, excessive force can damage
the unit. When the unit is correctly assembled the two dots
should align.
Maintenance:
1) Do not immerse this product in any liquid such as
water.
2) Retain these instructions for future use.
3) Clean the product with a damp cloth.
4) Do not press buttons with force.
5) Do not use in high temperature or high humidity.
FAQ:
Q) Can Merlin PureAir remove microbes from the
atmosphere?
A) Yes, its 3-step purication can deal with 99% of harmful
air borne microbes down to 0.3 microunit.
Q) Can Pureair show the quality of air around us?
A) Yes, the three dierent colored LEDs display the quality
of air around us.
Q) What is HEPA?
A) High eciency particulate air(HEPA) originally called
high-eciency particulate absorberis a type ofair lter.
Q) Can Pure Air be used for bedrooms or kid’s rooms?
A) Yes, the ltration process is safe and doesn’t omit any
allergens/Chemicals, therefore, making it safe to use for
your cars and rooms.
Q) Does PureAir helps as a room freshener as well?
A) Yes, Merlin PureAir breaks down the chemical smells and
vapors eectively deodorizing your home or vehicle.

Produkt Specifikationer

Mærke: Merlin
Kategori: Luftfugter
Model: PureAir

Har du brug for hjælp?

Hvis du har brug for hjælp til Merlin PureAir stil et spørgsmål nedenfor, og andre brugere vil svare dig


Luftfugter Merlin Manualer

Merlin

Merlin PureAir Manual

1 September 2024

Luftfugter Manualer

Nyeste Luftfugter Manualer

Plus More

Plus More MO-HF006 Manual

13 August 2025
Ivation

Ivation IVADM10 Manual

12 August 2025
Ivation

Ivation IVADDH06 Manual

12 August 2025
Ivation

Ivation IVADH70PW Manual

12 August 2025
Ivation

Ivation IVALDH30PW Manual

12 August 2025
Ivation

Ivation IVADM55 Manual

12 August 2025
Ivation

Ivation IVALDH70PWWP Manual

12 August 2025
Wood's

Wood's MRD25GW Manual

11 August 2025
Wood's

Wood's SW-59FW Manual

11 August 2025
Wood's

Wood's SW-20FW Manual

10 August 2025