Microchip ATmega165PA Manual

Microchip Ikke kategoriseret ATmega165PA

Læs gratis den danske manual til Microchip ATmega165PA (166 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om Microchip ATmega165PA, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/166

AVR® Instruction Set Manual

Introduction

This manual gives an overview and explanation of every instruction available for 8-bit AVR

® devices. Each instruction

has its own section containing functional description, it’s opcode, and syntax, the end state of the status register, and

cycle times.

The manual also contains an explanation of the different addressing modes used by AVR devices and an appendix

listing all modern AVR devices and what instruction it has available.

Table of Contents

Introduction.....................................................................................................................................................1

1. Instruction Set Nomenclature..................................................................................................................6

2. CPU Registers Located in the I/O Space................................................................................................8

2.1. RAMPX, RAMPY, and RAMPZ.....................................................................................................8

2.2. RAMPD........................................................................................................................................ 8

2.3. EIND.............................................................................................................................................8

3. The Program and Data Addressing Modes.............................................................................................9

3.1. Register Direct, Single Register Rd..............................................................................................9

3.2. Register Direct - Two Registers, Rd and Rr................................................................................. 9

3.3. I/O Direct.................................................................................................................................... 10

3.4. Data Direct................................................................................................................................. 10

3.5. Data Indirect............................................................................................................................... 11

3.6. Data Indirect with Pre-decrement............................................................................................... 11

3.7. Data Indirect with Post-increment.............................................................................................. 12

3.8. Data Indirect with Displacement.................................................................................................12

3.9. Program Memory Constant Addressing using the LPM, ELPM, and SPM Instructions............. 13

3.10. Program Memory with Post-increment using the LPM Z+ and ELPM Z+ Instruction................. 13

3.11. Store Program Memory Post-increment.....................................................................................14

3.12. Direct Program Addressing, JMP and CALL.............................................................................. 14

3.13. Indirect Program Addressing, IJMP and ICALL..........................................................................15

3.14. Extended Indirect Program Addressing, EIJMP and EICALL.....................................................15

3.15. Relative Program Addressing, RJMP and RCALL..................................................................... 16

4. Conditional Branch Summary............................................................................................................... 17

5. Instruction Set Summary.......................................................................................................................18

6. Instruction Description...........................................................................................................................24

6.1. ADC – Add with Carry................................................................................................................ 24

6.2. ADD – Add without Carry........................................................................................................... 25

6.3. ADIW – Add Immediate to Word................................................................................................ 26

6.4. AND – Logical AND....................................................................................................................27

6.5. ANDI – Logical AND with Immediate..........................................................................................28

6.6. ASR – Arithmetic Shift Right...................................................................................................... 29

6.7. BCLR – Bit Clear in SREG......................................................................................................... 30

6.8. BLD – Bit Load from the T Bit in SREG to a Bit in Register....................................................... 31

6.9. BRBC – Branch if Bit in SREG is Cleared..................................................................................32

6.10. BRBS – Branch if Bit in SREG is Set......................................................................................... 33

6.11. BRCC – Branch if Carry Cleared................................................................................................34

6.12. BRCS – Branch if Carry Set....................................................................................................... 35

6.13. BREAK – Break..........................................................................................................................36

6.14. BREQ – Branch if Equal.............................................................................................................36

6.15. BRGE – Branch if Greater or Equal (Signed).............................................................................37

6.16. BRHC – Branch if Half Carry Flag is Cleared.............................................................................38

AVR® Instruction Set Manual

Produkt Specifikationer

Mærke:	Microchip
Kategori:	Ikke kategoriseret
Model:	ATmega165PA

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip ATmega165PA stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Microchip Manualer

Microchip ATmega1281 Manual

19 Juli 2025

Microchip ATtiny461 Manual

19 Juli 2025

Microchip ATxmega128D3 Manual

19 Juli 2025

Microchip ATxmega128D4 Manual

19 Juli 2025

Microchip ATTINY28 Manual

19 Juli 2025

Microchip ATTINY861 Manual

19 Juli 2025

Microchip ATmega1280 Manual

19 Juli 2025

Microchip ATtiny84A Manual

19 Juli 2025

Microchip ATmega645P Manual

19 Juli 2025

Microchip ATmega16A Manual

19 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman MiVue Smartbox 3 Manual

1 August 2025

Navman MiVue 850 Manual

1 August 2025

Navman MiVue 690 Manual

1 August 2025

Navman MiVue 145 GPS TAG Manual

1 August 2025

Navman MY30 Manual

1 August 2025

Tripp Lite SPS610HGRA Manual

1 August 2025

AEG E1WYHSK1 Manual

1 August 2025

Thermaltake Pacific R1 Plus Manual

1 August 2025

Olivetti d-Copia 4523MFplus Manual

1 August 2025

Gossen GL SpectroSoft Manual

1 August 2025