Microchip EVB-USB2524 Manual

Microchip Ikke kategoriseret EVB-USB2524

Læs gratis den danske manual til Microchip EVB-USB2524 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Microchip EVB-USB2524, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
SMSC EVB-USB2524 Revision 0.9 (09-28-06)
Copyright © 2006 SMSC or its subsidiaries. All rights reserved.
The information contained herein is confidential and proprietary to SMSC, shall be used solely in accordance with the agreement pursuant
to which it is provided, and shall not be reproduced or disclosed to others without the prior written consent of SMSC. Although the
information is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to this
document and to specifications and product descriptions at any time without notice. Neither the provision of this information nor the
sale of the described semiconductor devices conveys any licenses under any patent rights or other intellectual property rights of SMSC
or others. The product may contain design defects or errors known as anomalies, including but not necessarily limited to any which may
be identified in this document, which may cause the product to deviate from published specifications. SMSC products are not designed,
intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to
personal injury or severe property damage. Any and all such uses without prior written approval of an officer of SMSC will be fully at
the risk of the customer. SMSC is a registered trademark of Standard Microsystems Corporation (“SMSC”).
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE,
AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE
LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA,
PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT;
NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY
OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
EVB-USB2524 Evaluation
Board Revision B1
EVB-USB2524 Evaluation Board Revision B1
Revision 0.9 (09-28-06) SECURITY LEVEL SMSC EVB-USB2524
2
1 Overview
The SMSC USB2524 MultiSwitchTM is an USB2.0 compliant switching hub with two up-stream ports
and four down-stream ports. The EVB-USB2524 Evaluation Board demonstrates a stand alone
application for the switching hub with all the features listed below. Each of the down stream ports can
individually be assigned to up-stream port 1 or up-stream port 2. The port assignment can be
dynamically changed with user accessible switches individually for each port.
1.1 Features
Operates from a single voltage (+5.0V, regulated) 'wall wart' external power supply
Low Cost 2-Layer Design
Self-powered operation
Multi-TT enabled
Supports four program selection options: Internal defaults, EEPROM (default), SMBus, Strapping
options
Serial EEPROM for configuration in a socket for easy programming
Single Onboard +3.3V Regulator
LED status modes supported: USB, BASIC, and DUAL LED
Single Crystal Clock Source
Individual port over-current sensing
Individual port power control
High-speed, Full-speed, and Low-speed capable
Port Assignment interface
Port OCS/Port Power Control interface
Optional ESD and EMI footprints are provided
1.2 General Description
The EVB-USB2524 is a demonstration and evaluation platform featuring the USB2524 MultiSwitch
TM 4-port USB2.0
Switching Hub. It is designed to robustly demonstrate this unique device's features using a low-cost PCB
implementation.
The EVB-USB2524 features an on-board EEPROM for VID/PID/DID and configuration strings, such as switching
options, LED status options, and non-removable or disabled configuration for each port. The manufacturer, product
and serial strings for the hub can be changed in the EEPROM as well.
The EVB-USB2524 can also be configured through changing population of resistors to access internal “strapping
options”, without using the EEPROM.
The schematic for the EVB-USB2524 indicates which components are required for each configuration option.

Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: EVB-USB2524

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip EVB-USB2524 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Microchip Manualer

Microchip

Microchip ATmega1281 Manual

19 Juli 2025
Microchip

Microchip ATtiny461 Manual

19 Juli 2025
Microchip

Microchip ATxmega128D3 Manual

19 Juli 2025
Microchip

Microchip ATxmega128D4 Manual

19 Juli 2025
Microchip

Microchip ATTINY28 Manual

19 Juli 2025
Microchip

Microchip ATTINY861 Manual

19 Juli 2025
Microchip

Microchip ATmega1280 Manual

19 Juli 2025
Microchip

Microchip ATtiny84A Manual

19 Juli 2025
Microchip

Microchip ATmega645P Manual

19 Juli 2025
Microchip

Microchip ATmega16A Manual

19 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman

Navman MiVue Smartbox 3 Manual

1 August 2025
Navman

Navman MiVue 850 Manual

1 August 2025
Navman

Navman MiVue 690 Manual

1 August 2025
Navman

Navman MiVue 145 GPS TAG Manual

1 August 2025
Navman

Navman MY30 Manual

1 August 2025
Tripp Lite

Tripp Lite SPS610HGRA Manual

1 August 2025
AEG

AEG E1WYHSK1 Manual

1 August 2025
Thermaltake

Thermaltake Pacific R1 Plus Manual

1 August 2025
Olivetti

Olivetti d-Copia 4523MFplus Manual

1 August 2025
Gossen

Gossen GL SpectroSoft Manual

1 August 2025