Microchip LX7720 Manual

Microchip Ikke kategoriseret LX7720

Læs gratis den danske manual til Microchip LX7720 (50 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Microchip LX7720, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/50

LX7720MLF Evaluation Board User Guide

Description

The LX7720MLF evaluation board (EVB) contains a soldered in place LX7720MLF and peripherals to allow LX7720

functionality to be quickly evaluated. Demonstration firmware is available for RTG4 FPGAs and SAM rad hard MCUs.

The LX7720MLF EVB uses a 40-way header for connection to FPGA or MCU controllers. The kit includes linker boards

for direct plug-in connection to an RTG4 FPGA FPGA DEV-KIT, an RT PolarFire FPGA RTPF-DEV-KIT, a PolarFire

MPF300-EVAL-KIT, a SmartFusion2 SoC FPGA M2S150-ADV-DEV-KIT, a SAMRH71F20 MCU Evaluation Kit and

SAMRH71-TFBGA-EK Evaluation Kit, and a SAMRH707F18 MCU Evaluation Kit.

Kit Contents

• LX7720MLF evaluation board with soldered-in-place LX7720MLF production part

• 24V 1.5A universal input AC adapter with 2.1mm x 5.5mm DC output connector, centre positive

• 2-position 5mm pitch terminal block socket type B, Molex 0395237002 or equivalent, to mate PL2

• 4-position 5mm pitch terminal block socket type B, Molex 0395237004 or equivalent, to mate PL_MOTOR

• FMC-HPC Linker adaptor to connect to various FPGA evaluation boards as listed above

• Linker board to connect to a SAMRH71F20-EK evaluation kit, plus a board with control switches and LEDs

• Linker board to connect to a SAMRH71-TFBGA-EK evaluation kit (which can also use the switch/LED board)

• Linker board to connect to a SAMRH707F18-EK evaluation kit, with LC filters for optional ∆Σ stream processing

• A bipolar 7.5°/step stepper motor for test purposes, mounted with ballast resistors for 24V operation (140Ω/phase)

• 4x 6mm, 4x 7mm nylon standoffs and 4x nuts for linker board height matching

• USB stick with documentation (see section 2 on page 4)

Ordering Information

Product Order Number

LX7720MLF Evaluation Board LX7720MLF-DB

Figure 1. LX7720MLF Evaluation Board

LX7720MLF Evaluation Board User Guide

Linker Adaptors to FPGA and MCU Evaluation Boards

1 Linker Adaptors to FPGA and MCU Evaluation Boards

The LX7720MLF EVB provides a 2x20 pin 0.1" pitch pin header, PL20, which provides 3.3V logic level control signals to

and from an external MCU controller or FPGA. Section 5 on page 21 details PL20's pinout, whic h is different to that used

by J20 on the LX7720-DB. The pinout was modified from that used by the LX7720-DB's PL20 to make the routing for

high-speed logic connections as direct as possible to the LX7720's pins.

The LX7720MLF EVB includes linker adaptors for direct interconnection to FPGA and MCU controller boards:

• The FMC-HPC linker (section 6 on page 23) routes PL20 signaling to a develop ment board with an HPC-FMC (High

Pin Count FPGA Mezzanine Card) connector. The pinout is provided in Table 7 on page 24 and Table 8 on page 25.

Pinouts and FPGA resource allocations are provided for the following FPGA boards' HPC1-FMC connector:

 The RTG4 FPGA DEV-KIT (Table 9 on page 26)

 The PolarFire FPGA MPF300-EVAL-KIT (Table 9 on page 26)

 The RT PolarFire FPGA RTPF-DEV-KIT (Table 10 on page 27)

 The SmartFusion2 SoC FPGA M2S150-ADV-DEV-KIT (Table 11 on page 28)

Figure 2. RTG4 DEV_KIT using FMC-HPC Linker to Connect to LX7720MLF EVB

• The SAMRH71-EK linker (section 7 on page 30) routes PL20 signaling to a SAMRH71F20-EK evaluation kit for the

SAMRH71F20 MCU. Table 14 on page 31 provides the pinout and MCU resource allocation. The kit comprises a

linker board which connects a SAMRH71F20-EK to the LX7720MLF-EVB, a small board with switches, and a ribbon

cable:

 The linker board connects signals from the SAMRH71F20-EK's 0.1" headers J24 and J30 to PL20

▫ All four LX7720 half-bridges are routed to the MCU PWM outputs, for BLDC and stepper compatibility

▫ 3 of the 4 motor phase current ∆Σ serial streams (SNS_OUT_A, B, and C) are routed to MCU TCLK inputs

▫ Two LX7720 bi-level (comparator) outputs are routed to MCU QDEC TIO inputs for quadrature encoder use

▫ The resolver/LVDT transformer primary differential drive (DMOD_IN_P, DMOD_IN_N) and associated ADC

Σ-Δ modulators ADC1, ADC2, and ADC3 are not routed to the MCU, but brought out to test point holes

 The switch board connects to GPIOs on SAMRH71F20-EK's 0.1" header J25 via a 20 way ribbon cable. The

SAMRH71F20 optionally uses GPIOs to monitor five push switches and operate two LEDs as status indicators

Figure 3. SAMRH71-EK using SAMRH71-EK Linker to Connect to LX7720MLF EVB

Produkt Specifikationer

Mærke:	Microchip
Kategori:	Ikke kategoriseret
Model:	LX7720

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip LX7720 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Microchip Manualer

Microchip HS12-100D0/12DS2F Manual

18 Februar 2025

Microchip HSA0-040SDA/A0SA10 Manual

18 Februar 2025

Microchip HSA0-040SIA/A0S1F Manual

18 Februar 2025

Microchip HT12-100S0s/12ST25 Manual

17 Februar 2025

Microchip EMC2103-2 Manual

17 Februar 2025

Microchip EMC1047 Manual

17 Februar 2025

Microchip HCS201 Manual

17 Februar 2025

Microchip LE9653 Manual

17 Februar 2025

Microchip LAN7430 Manual

17 Februar 2025

Microchip HCS500 Manual

17 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 102385 Manual

16 Juni 2025

Playtive IAN 89045 Manual

16 Juni 2025

AMX HPA-MYT-TX Manual

16 Juni 2025

Playtive IAN 293611 Manual

16 Juni 2025

Playtive IAN 321239 Manual

16 Juni 2025

XO D34PROBF Manual

16 Juni 2025

Playtive IAN 107436 Manual

16 Juni 2025

Zodiac Hydroxinator iQ Manual

16 Juni 2025

Zempire Deluxe 2 Manual

16 Juni 2025

Playtive HG02891 Manual

16 Juni 2025