Microchip MCP73863 Manual


Læs gratis den danske manual til Microchip MCP73863 (34 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Microchip MCP73863, eller vil du spørge andre brugere om produktet?

Side 1/34
2004-2013 Microchip Technology Inc. DS21893F-page 1
MCP73861/2/3/4
Features:
Linear Charge Management Controllers:
- Integrated Pass Transistor
- Integrated Current Sense
- Reverse-Blocking Protection
High-Accuracy Preset Voltage Regulation: + 0.5%
Four Selectable Voltage Regulation Options:
- 4.1V, 4.2V – MCP73861/3
- 8.2V, 8.4V – MCP73862/4
Programmable Charge Current: 1.2A Maximum
Programmable Safety Charge Timers
Preconditioning of Deeply Depleted Cells
Automatic End-of-Charge Control
Optional Continuous Cell Temperature Monitoring
Charge Status Output for Direct LED Drive
Fault Output for Direct LED Drive
Automatic Power-Down
Thermal Regulation
Temperature Range: -40°C to +85°C
Packaging: 16-Pin, 4 x 4 QFN
16-Pin SOIC
Applications:
Lithium-Ion/Lithium-Polymer Battery Chargers
Personal Data Assistants (PDAs)
Cellular Telephones
Hand-Held Instruments
Cradle Chargers
Digital Cameras
MP3 Players
Description:
The MCP7386X family of devices features highly
advanced linear charge management controllers for
use in space-limited, cost-sensitive applications. The
devices combine high-accuracy, constant voltage and
current regulation, cell preconditioning, cell
temperature monitoring, advanced safety timers,
automatic charge termination, internal current sensing,
reverse-blocking protection, charge status and fault
indication in either a space-saving 16-pin 4 x 4 QFN
package, or a 16-pin SOIC package. The MCP7386X
provides a complete, fully functional, stand-alone
charge management solution with a minimum number
of external components.
The MCP73861/3 is intended for applications utilizing
single-cell Lithium-Ion or Lithium-Polymer battery
packs, while the MCP73862/4 is intended for dual
series cell Lithium-Ion or Lithium-Polymer battery
packs. The MCP73861/3 has two selectable
voltage-regulation options available (4.1V and 4.2V),
for use with either coke or graphite anodes and operate
with an input voltage range of 4.5V to 12V. The
MCP73862/4 has two selectable voltage-regulation
options available (8.2V and 8.4V), for use with coke or
graphite anodes, and operate with an input voltage
range of 8.7V to 12V.
The MCP73861/2 and MCP73863/4 differ only in the
function of the charge status output (STAT1) when a
charge cycle has been completed. The MCP73861/2
flashes the output, while the MCP73863/4 turns the
output off. Refer to Section 5.2.1 “Charge Status
Outputs (STAT1, STAT2)”.
The MCP7386X family of devices are fully specified
over the ambient temperature range of -40°C to +85°C.
Advanced Single or Dual Cell, Fully Integrated Li-Ion/Li-Polymer
Charge Management Controllers
MCP73861/2/3/4
DS21893F-page 2 2004-2013 Microchip Technology Inc.
Package Types
VDD1
VBAT3
THERM
EN
TIMER
STAT1
STAT2 1
2
3
4
14
15
16
PROG
VDD2
VSET
VSS1
THREF
VBAT1
VBAT2
5
6
7
8 9
10
11
12
13
VSS2
VSS3
16-Pin SOIC16-Pin QFN
2
VDD2
VSS1
VSET VBAT3
VBAT2
PROG
VBAT1
THREF
THERM
TIMER
VSS3
STAT1
STAT2
EN
VSS2
VDD2 EP
16
1
15 14 13
3
4
12
11
10
9
5 6 7 8
17


Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: MCP73863

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip MCP73863 stil et spørgsmål nedenfor, og andre brugere vil svare dig