Microchip MCP9803 Manual

Microchip Ikke kategoriseret MCP9803

Læs gratis den danske manual til Microchip MCP9803 (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Microchip MCP9803, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

 2010-2015 Microchip Technology Inc. DS00001001C-page 1

AN1001

INTRODUCTION

Microchip Technology Inc. provides a number of analog

and serial output Integrated Circuit (IC) temperature

sensors. Typically, these sensors are accurate at room

temperature within one degree Celsius (±1°C). How-

ever, at hot or cold temperature extremes, the accuracy

decreases nonlinearly. Normally, that nonlinearity has a

parabolic shape.

This application note derives an equation to describe

the typical nonlinear characteristics of a sensor, which

is used to determine compensation for the sensor's

accuracy error over a specified range of operating tem-

peratures. A PIC® microcontroller unit (MCU) can

compute the equation and provide a temperature read-

ing with higher accuracy.

This application note is based on MCP9700 and

MCP9701 analog-output temperature sensors and

MCP9800 serial-output temperature sensors.

SOLUTION APPROACH

Silicon characterization data is used to determine the

nonlinear sensor characteristics. From this data, an

equation is derived that describes the typical perfor-

mance of a sensor. When the corresponding coeffi-

cients for the equation are determined, the coefficients

are used to compute the compensation for the typical

sensor’s nonlinearity.

The error distribution is provided using an average and

±1 standard deviation (± before and after compensa-

tion. A total of 100 devices were used as representative

for the MCP9700 and MCP9701, while 160 devices

were used for the MCP9800.

Figure 1 shows the typical sensor accuracy before and

after compensation. It illustrates that the compensation

provides an accurate and linear temperature reading

over the sensor operating temperature range.

A PIC MCU is used to compute the equation and

compensate the sensor output to provide a linear

temperature reading.

FIGURE 1: Typical Sensor Accuracy Before and After Compensation.

Author: Ezana Haile

Microchip Technology Inc.

-3.0

-2.0

-1.0

0.0

1.0

2.0

3.0

-55 -35 -15 5 25 45 65 85 105 125

Temperature (°C)

Typical Accuracy (°C)

Sensor Accuracy

Compensated Sensor Accuracy

IC Temperature Sensor Accuracy Compensation

with a PIC® Microcontroller

Produkt Specifikationer

Mærke:	Microchip
Kategori:	Ikke kategoriseret
Model:	MCP9803

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip MCP9803 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Microchip Manualer

Microchip PIC16F87 Manual

25 Oktober 2025

Microchip PIC18F2620 Manual

25 Oktober 2025

Microchip RN240 Manual

24 Oktober 2025

Microchip PIC24HJ12GP201 Manual

24 Oktober 2025

Microchip TC4420 Manual

24 Oktober 2025

Microchip HV2818 Manual

23 Oktober 2025

Microchip MIC2298 Manual

23 Oktober 2025

Microchip PIC16F630 Manual

23 Oktober 2025

Microchip PIC32MZ2048EFG144 Manual

21 Oktober 2025

Microchip PIC18F46J50 Manual

21 Oktober 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Scott Essential 09989 Manual

5 November 2025

BlueShape Granite Link AP Manual

5 November 2025

EtherWAN OttoE 10H Manual

5 November 2025

Infiniton Belcanto49C1 Manual

5 November 2025

Intermatic WP1250MXD Manual

5 November 2025

INIU P63-P1 Manual

5 November 2025

D'Addario PW-XPND-01 Manual

5 November 2025

DS18 VOC8PRO Manual

5 November 2025

Icron Rover 2850 Manual

5 November 2025

Amaran Peak Manual

5 November 2025