Milwaukee 2235-20 Manual

Milwaukee Multimeter 2235-20

Læs gratis den danske manual til Milwaukee 2235-20 (11 sider) i kategorien Multimeter. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Milwaukee 2235-20, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/11
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.
400 AMP CLAMP METER
PINCE AFFICHEUR DE COURANT DE 400 A
MEDIDOR DE PINZA DE 400 A
Cat. No.
No de cat.
2235-20
23
IMPORTANT SAFETY INSTRUCTIONS
WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS.
Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious
injury, as well as instrument damage and/or damage to the equipment being tested.
Save these instructions - This operator’s manual contains important safety and operating
instructions for the MILWAUKEE 400 Amp Clamp Meter. Before using, read this operator’s
manual and all labels on the Clamp Meter.
DANGER
Never make measurement on a circuit in which voltage over 600 volts AC exists. Use only
leads rated 600V or better.
Do not attempt to make measurement in the presence of fl ammable gasses. Otherwise, the
use of the instrument may cause sparking, which can lead to an explosion.
Transformer jaw tips are designed not to short the circuit under test. If equipment under test
has exposed conductive parts, however, extra precaution should be taken to minimize the
possibility of shorting.
Do not hold the meter above hand-stop.
Never attempt to use the instrument if its surface or your hand is wet.
Do not exceed the maximum allowable input of any measuring range.
Only use test leads on unenergized circuits unless absolutely necessary.
Check tool functionality on a known circuit fi rst. Never assume tool is working. Assume circuits
are live until they can be proven de-energized.
Do not ground yourself while measuring. Avoid body contact with earthed or grounded sur-
faces such as pipes, radiators, ranges and refrigerators.
Never open the battery cover during a measurement.
The instrument is to be used only in its intended applications or conditions. Otherwise, safety
functions equipped with the instrument doesn’t work, and instrument damage or serious
personal injury may be caused.
To reduce the risk of injury from shock and arc blasts, always wear personal protective
equipment where live conductors are exposed.
WARNING
Never attempt to make measurement if any abnormal conditions, such as broken case and
exposed metal parts are found on the instrument.
Do not rotate the rotary dial while the test leads are being connected.
Verify proper operation on a known source before use or taking action as a result of the in-
dication of the instrument.
Do not install substitute parts or make any modifi cation to the instrument. For repair or re-
calibration, return the tool to a factory Service/Sales Support Branch or authorized service
station.
Do not try to replace the batteries if the surface of the instrument is wet.
Disconnect all the cords and cables from the object under test and power o the instrument
before opening the battery cover for battery replacement.
This tool is designed to be powered by 2-AAA batteries properly inserted into the MILWAUKEE
Clamp Meter. Do not attempt to use with any other voltage or power supply.
Install battery according to polarity (+ and –) diagrams.
Do not leave batteries within the reach of children.
Do not mix new and used batteries. Do not mix brands (or types within brands) of batteries.
Properly dispose of used batteries.
Do not incinerate or dismantle batteries.
Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact
accidentally occurs, fl ush with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
CAUTION
Set the rotary dial to an appropriate position before starting measurement.
Firmly insert the test leads.
Disconnect the test leads from the instrument for current measurement.
Do not expose the instrument to the direct sun, high temperature and humidity or dew fall.
Altitude 2000m or less. Appropriate operating temperature is within 14°F and 122°F (-10°C
and 50°C).
This instrument isn’t dust & water proofed. Keep away from dust and water.
Be sure to power o the instrument after use. When the instrument will not be in use for a long
period, place it in storage after removing the batteries.
Use a cloth dipped in water or neutral detergent for cleaning the instrument. Do not use
abrasives or solvents.
Functions
Dial Position Range Resolution Accuracy
Voltage DC 400.0/600V 0.1V/1V ± 1.0%rdg ± 5dgt
Voltage AC 400.0V/600V 0.1V/1V ± 1.2% ± 5dgt (50 to 400Hz)
Current AC 40.00/400.0A 0.01A/0.1A ± 1.8%rdg ± 5dgt(50/60Hz)
± 3.0%rdg ± 5dgt(60 to 400Hz)
Resistance 4000 1 ± 1.0%rdg ± 3dgt 
Continuity Cont Buzzer
0-400.00.1 ± 1% ± 5dgt
Beeper sounds at 30 ohms and below.
* These instruments are True-RMS sensing. All voltage and current readings are True-RMS values.
* All AC ranges are specifi ed from 0.25% to 100% of range.
General Specifi cations FUNCTIONAL DESCRIPTION
1. Current sensing jaws
2. Jaw opening trigger
3. Worklight on/off
4. Backlight button
5. Display
6. COM Terminal input
7. V Terminal input
8. Hold button
9. Rotary dial
10. Hand-stop
11. Worklight LED
Accuracy is specifi ed for 1 year after calibration, at
operating temperatures of 64°F to 82°F (18°C to
28°C), with relative humidity at 0 % to 85 %.
Maximum voltage between any terminal and
earth ground .... 600 V
Jaw Opening (maximum conductor size) ....
1.0” (25.4 mm)
Temperature ....
Operating: 14°F to 122°F (-10°C to 50°C)
Storage: -40°F to 140°F (-40°C to 60°C)
Temperature Coefficient .... 0.1 x (specified
accuracy)/°C (<18°C or >28°C)
Operating Altitude.... 2,000 meters
Drop Test .... 1 Meter
Battery .... 2 AAA, NEDA 24 A, IEC LR03
Battery Life .... Approx. 20 hours with all lights on,
100 hours without backlight.
Safety Compliances .... EN61010-1,
UL 61010-1, EN61010-031 (Probes),
IEC 61010-2-32 (Clamp Assemblies),
IEC/EN 61010-1 2nd Edition for measurement
Category III, 600 V,
Pollution Degree 2, EMC EN61326-1
Certifi cations .... cULus, CE
1
3
5
6
4
2
8
11
9
7
10

Produkt Specifikationer

Mærke: Milwaukee
Kategori: Multimeter
Model: 2235-20

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee 2235-20 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Multimeter Milwaukee Manualer

Milwaukee

Milwaukee 2237-20 Manual

16 August 2024
Milwaukee

Milwaukee RMS 2217-20NST Manual

22 Juli 2024
Milwaukee

Milwaukee 2206-20 Manual

19 Juli 2024
Milwaukee

Milwaukee 2205-20 Manual

8 Juli 2024
Milwaukee

Milwaukee 2236-20 Manual

25 Oktober 2023
Milwaukee

Milwaukee 2235-20 Manual

12 Marts 2023
Milwaukee

Milwaukee 2216-20 Manual

15 November 2022
Milwaukee

Milwaukee 2212-20 Manual

12 November 2022

Multimeter Manualer

Nyeste Multimeter Manualer

Sauermann

Sauermann HQ 210 Manual

13 August 2025
Sauermann

Sauermann AMI 310 Manual

13 August 2025
Sauermann

Sauermann MP 210 Manual

13 August 2025
Bosch

Bosch RM 3 Professional Manual

6 August 2025
Uni-T

Uni-T UT197PV Manual

5 August 2025
Fluke

Fluke 17xx Manual

2 August 2025
Fluke

Fluke 5550A Manual

2 August 2025
Kyoritsu

Kyoritsu KEW 2210R Manual

2 August 2025
Fluke

Fluke T+ Manual

1 August 2025
Trotec

Trotec BE60 Manual

1 August 2025