Milwaukee 2236-20 Manual

Milwaukee Multimeter 2236-20

Læs gratis den danske manual til Milwaukee 2236-20 (20 sider) i kategorien Multimeter. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Milwaukee 2236-20, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

Cat. No. / No de cat.

2236-20, 2237-20

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

CLAMP METERS

PINCE AFFICHEUR DE COURANT

MEDIDORES DE PINZA

WARNING

READ ALL SAFETY WARNINGS AND IN-

STRUCTIONS.

Failure to follow the warnings and instructions

may result in electric shock, re and/or serious

injury, as well as instrument damage and/or dam-

age to the equipment being tested.

Save these instructions - This operator’s manual

contains important safety and operating instruc-

tions for the MILWAUKEE Clamp Meters. Before

using, read this operator’s manual and all labels

on the Clamp Meters.

DANGER

Never make measurement on a circuit in which

voltage over AC600V exists. Use only leads rated

600V or better.

Do not attempt to make measurement in the pres-

ence of ammable gasses. Otherwise, the use of

the instrument may cause sparking, which can

lead to an explosion.

Transformer jaw tips are designed not to short the cir-

cuit under test. If equipment under test has exposed

conductive parts, however, extra precaution should

be taken to minimize the possibility of shorting.

Never attempt to use the instrument if its surface

or your hand is wet.

Do not exceed the maximum allowable input of

any measuring range.

Only test on unenergized circuits unless abso-

lutely necessary.

Check tool functionality on a known circuit rst.

Never assume tool is working. Assume circuits are

live until they can be proven de-energized.

Do not ground yourself while measuring. Avoid

body contact with earthed or grounded surfaces

such as pipes, radiators, ranges and refrigerators.

Never open the Battery cover during a measurement.

The instrument is to be used only in its intended

applications or conditions. Otherwise, safety func-

tions equipped with the instrument doesn’t work,

and instrument damage or serious personal injury

may be caused.

To reduce the risk of injury from shock and arc

blasts, always wear personal protective equipment

where live conductors are exposed.

WARNING

Never attempt to make measurement if any abnor-

mal conditions, such as broken case and exposed

metal parts are found on the instrument.

Do not rotate the Rotary Dial while the test leads

are being connected.

Verify proper operation on a known source before

use or taking action as a result of the indication

of the instrument.

Do not install substitute parts or make any modi-

cation to the instrument. For repair or re-cali-

bration, return the tool to a factory Service/Sales

Support Branch or authorized service station.

Do not try to replace the batteries if the surface of

the instrument is wet.

Disconnect all the cords and cables from the object

under test and power off the instrument before

opening the Battery Cover for Battery replacement.

This tool is designed to be powered by 2-AA batter-

ies properly inserted into the MILWAUKEE Clamp

Meters. Do not attempt to use with any other volt-

age or power supply.

Install battery according to polarity (+ and –) diagrams.

Do not leave batteries within the reach of children.

Do not mix new and used batteries. Do not mix

brands (or types within brands) of batteries.

Properly dispose of used batteries.

Do not incinerate or dismantle batteries.

Under abusive conditions, liquid may be ejected

from the battery, avoid contact. If contact acciden-

tally occurs, ush with water. If liquid contacts

eyes, additionally seek medical help. Liquid eject-

ed from the battery may cause irritation or burns.

CAUTION

Set the Rotary Dial to an appropriate position

before starting measurement.

Firmly insert the test leads.

Disconnect the test leads from the instrument for

current measurement.

Do not expose the instrument to the direct sun,

high temperature and humidity or dew fall.

Altitude 2000m or less. Appropriate operating

temperature is within -10ºC and 50ºC.

This instrument isn’t dust & water proofed. Keep

away from dust and water.

Be sure to power off the instrument after use. When

the instrument will not be in use for a long period,

place it in storage after removing the batteries.

Use a cloth dipped in water or neutral detergent

for cleaning the instrument. Do not use abrasives

or solvents.

GENERAL SPECIFICATIONS

Cat. No. 2236-20, 2237-20 ......................................

Accuracy is specied for 1 year after calibration, at

operating temperatures of 64°F to 82°F (18°C to

28°C), with relative humidity at 0 % to 85 %.

Maximum voltage between any

terminal and earth ground ...................... 600 V

Jaw Opening .......................approx. 1.3" (33 mm)

(maximum conductor size)

Temperature

Operating .............14°F to 122°F (-10°C to 50°C)

Storage .............. -40°F to 140°F (-40°C to 60°C)

Temperature Coefcient ...............................0.1 x

(specied accuracy)/°C (<18°C or >28°C)

Operating Altitude ............................2,000 meters

Drop Test ................................................... 1 Meter

Battery ........................ 2 AA, NEDA 15 A,IEC LR6

Battery Life ..............Approx. 30 Hours all lights on

Safety Compliances ....... UL/CSA 61010-1 3rd Ed

UL/CSA 61010-2-033 1st Ed (Meters)

UL/CSA/IEC/EN 61010-031 1st Ed + A1 (Probes)

UL/CSA 61010-2-032 1st Edition (Clamp Assemblies)

Measurement Category III, 600V

Pollution Degree 2, EMC EN61326-1

Certications............................................... cULus

IMPORTANT

SAFETY

INSTRUCTIONS

Produkt Specifikationer

Mærke:	Milwaukee
Kategori:	Multimeter
Model:	2236-20

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee 2236-20 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Multimeter Milwaukee Manualer

Milwaukee 2237-20 Manual

16 August 2024

Milwaukee RMS 2217-20NST Manual

22 Juli 2024

Milwaukee 2206-20 Manual

19 Juli 2024

Milwaukee 2205-20 Manual

8 Juli 2024

Milwaukee 2236-20 Manual

25 Oktober 2023

Milwaukee 2235-20 Manual

12 Marts 2023

Milwaukee 2216-20 Manual

15 November 2022

Milwaukee 2212-20 Manual

12 November 2022

Multimeter Manualer

Nyeste Multimeter Manualer

8 Juni 2025

7 Juni 2025

7 Juni 2025

6 Juni 2025

6 Juni 2025

6 Juni 2025

6 Juni 2025

6 Juni 2025

6 Juni 2025

3 Juni 2025