Mio BTH200 Manual

Mio Hovedtelefoner BTH200

Læs gratis den danske manual til Mio BTH200 (8 sider) i kategorien Hovedtelefoner. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Mio BTH200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

1 www.everik.com BTH200.KM.072013.IM

BTH200

Adjustable Bluetooth Stereo Headset

Package Contents:

 Adjustable Bluetooth Stereo Headset

 USB cable with micro connector for charging

Specifications:

 Bluetooth specicaon: V2.1+EDR

 Bluetooth proles supported: HSP, HFP,A2DP AVRCP and

 Operang distance: meters Class 10 II

 Baery capacity: 230 mAh

 Talk me: Up to 11 hours

 Music playing me: About 10 hours

 Standby me: About 250 hours

 Charging me: About 2.5 hours

 Charge input voltage: DC 5V

 Dimensions: 162×153.5×32 mm

 Weight: g 103

Features:

 Adjustable headband with so comfortable ear pads

 Embedded microphone for hands free calling from Bluetooth enabled - -

devices

 Pause & play music automacally when receiving incoming calls

 Automacally connects to the last connected Bluetooth device

 Charges via 2.5mm DC Jack

 Talk me / Music play me: 11hrs

 Baery capacity: 230 mAh with charging me of 2.5 hrs.

1. Le Speaker 7. Fast forward

2. Right speaker 8. LED indicator

3. Retractable headband 9. MFB buon: music pause / play

4. 10. Rewind Volume up

5. 11. Volume down - Built in microphone

6. Charging jack

Headset Overview

2 www.everik.com BTH200.KM.072013.IM

1. Charging the headset

The headset comes with a built in rechargeable baery, prior to using it, it is recommended to charge the baery fully for the rst me. When the headset is low -

power, the headset emits “Dongdong” tones about every 20 seconds and the red LED ashes. Please recharge the baery of the headset.

How to charge the headset:

Plug USB charging cable into the USB port of computer and connect the micro connector to the headset

It will take about 3 hours to nish charging

 Red light on: Charging

 Red light o: Finished charging

2. Turning the headset on/o

Funcons Operaon LED indicator

Turning On Press and hold MFB buon for 4 seconds unl blue LED ashes Blue LED on one second

Turning O Press and hold MFB buon for 4 seconds unl red LED ashes Red LED on one second

Note: In order to save power, the headset will turn o automacally if no devices are connected aer 5 minutes.

3. Pairing the headset

Funcons Operaon LED indicator

Entering pairing mode Ensure the headset is o, and then press and hold the MFB buon for 7 to

8 seconds unl red and blue LED ash alternately

Red and blue LED ash alternately

3 1. Pairing the headset—Notes-

Prior to using the headset for the rst me, you have to pair it with a Bluetooth enabled device. The pairing procedures may dier pending on the model of the -

device you’re trying to pair. Please refer to your device/phone user manual for further informaon.

The general pairing procedures are as follows:

 Keep your headset and phone within 1 meter when pairing;

 Start the pairing mode operaon on your headset (see #3 pairing headset)

 Acvate your device Bluetooth funcon and set your device to search for Bluetooth devices within range and select “BTH200” m the list of devices shown;fro

 Enter PIN/ Password No: “0000”( Note: If the mobile phone supports Bluetooth V2.1, password is not required.)

 If prompted by your device to connect, select “Yes”

 Aer successfully connecng, blue LED light on the headset ashes 2/3 mes every 4 seconds

Notes:

 If pairing failed, please turn o the headset rst and then re pair according to steps 1 menoned above.- -6

 Aer inial pairing, the headset and the device will remember each other, they will no longer need to re pair next me. The headset can store up to 8 paired devices. When the -

number of paired devices exceeds 8, the rst one will be replaced.

4. Playing Music

Funcons Status of the headset LED indicator

Volume up Playing music Press + buon

Volume down Playing music - Press buon

Rewind Playing music Press buon once◄

Fast forward Playing music Press buon once►

Pause Playing music Press MFB once

Play Pausing music Press MFB once