Moxa SPL-24-T Manual

Moxa Netværkskort/adapter SPL-24-T

Læs gratis den danske manual til Moxa SPL-24-T (7 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Moxa SPL-24-T, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

P/N: 1802000240111

*1802000240111*

SPL 24 Series -

Quick Installation Guide

PoE Splitter

Vers 20ion 6.2 , May 21

Technical Support Contact Information

www.moxa.com/support



2 . A 20 1 Moxa Inc ll rights reserved.

- - 2

Overview

The SPL-24 plays the role of PD, and splits the data signal and power

signal that are transmitted from the PSE. The SPL-24 plays a dual role of

providing power to industrial devices, and enabling Ethernet connections.

The SPL- -24 have a wide operating temperature range of 40 to 75°C, and

are designed to withstand a high degree of vibration and shock. The

rugged hardware design makes the SPL-24 perfect for ensuring that your

Ethernet equipment can operate in critical industrial environments, such

as in hazardous locations, and complies with FCC and CE standards.

NOTE

Throughout this Hardware Installation Guide, we use EDS as an

abbreviation for Moxa EtherDevice Switch, and we use SPL as an

abbr

eviation for Moxa PoE Splitter:

SPL = Moxa PoE Splitter

Wiring Requirements

WARNING

Do not disconnect modules or wires unless the power supply has

been switched off or the area is known to be non

hazardous. The

devices may only be connected to the

supply voltage shown on

the type plate. The devices are designed for operation with a

Safety Extra

Low Voltage. Thus, they may only be connected to

the supply voltage connections and to the signal contact with the

Safety Extra

- Low Voltages (SELV) in compliance with IEC

60950-1/EN 60950-1.

WARNING

The power for this product is intended to be supplied by a Listed

Power Unit, with output marked LPS, and rated to deliver 48 VDC

at a maximum of 300 mA.

WARNING

This unit is a built

-in type. When the unit is installed in another

piece of equipment, the equipment enclosing the unit must

comply with fire enclosure regulation IEC 60950

-1 -1 /EN60950

(or similar regulation).

Produkt Specifikationer

Mærke:	Moxa
Kategori:	Netværkskort/adapter
Model:	SPL-24-T

Har du brug for hjælp?

Hvis du har brug for hjælp til Moxa SPL-24-T stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Netværkskort/adapter Moxa Manualer

23 August 2024

23 August 2024

24 Juni 2024

23 Juni 2024

23 Juni 2024

Netværkskort/adapter Manualer

Nyeste Netværkskort/adapter Manualer

Cudy PE10G Manual

10 Juni 2025

Vivolink VLUSBCHUB3 Manual

7 Juni 2025

Cudy BE6500 Manual

6 Juni 2025

Cudy WU5400 Manual

3 Juni 2025

Cudy BU530 Manual

3 Juni 2025

EXSYS EX-12006 Manual

2 Juni 2025

EXSYS EX-6162 Manual

1 Juni 2025

EXSYS EX-60114 Manual

1 Juni 2025

EXSYS EX-60115 Manual

1 Juni 2025

EXSYS EX-6131 Manual

1 Juni 2025