NAD C 368 Manual

NAD Modtager C 368

Læs gratis den danske manual til NAD C 368 (22 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 249 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 125 anmeldelser. Har du et spørgsmål om NAD C 368, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/22

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Owner’s Manual

C 368

Hybrid Digital DAC Amplier

1. Read instructions - All the safety and operating instructions should be read

before the product is operated.

2. Retain instructions - The safety and operating instructions should be retained

for future reference.

3. Heed Warnings - All warnings on the product and in the operating instructions

should be adhered to.

4. Follow Instructions - All operating and use instructions should be followed.

5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6. Attachments - Do not use attachments not recommended by the product

manufacturer as they may cause hazards.

7. Water and Moisture - Do not use this product near water-for example, near a

bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a

swimming pool; and the like.

8. Accessories - Do not place this product on an unstable cart, stand, tripod,

bracket, or table. The product may fall, causing serious injury to a child or adult

and serious damage to the product. Use only with a cart, stand, tripod, bracket,

or table recommended by the manufacturer, or sold with the product. Any

mounting of the product should follow the manufacturer’s instructions, and

should use a mounting accessory recommended by the manufacturer.

9. Cart - A product and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the

product and cart combination to overturn.

10. Ventilation - Slots and openings in the cabinet are provided for ventilation

to ensure reliable operation of the product and to protect it from overheating.

These openings must not be blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug, or other similar surface. This

product should not be placed in a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manufacturer’s instructions have been

adhered to.

11. Power Sources - This product should be operated only from the type of power

source indicated on the marking label and connected to a MAINS socket outlet

with a protective earthing connection. If you are not sure of the type of power

supply to your home, consult your product dealer or local power company.

12. Power-Cord Protection - Power-supply cords should be routed so that they are

not likely to be walked on or pinched by items placed upon or against them,

paying particular attention to cords at plugs, convenience receptacles, and the

point where they exit from the product.

13. Mains Plug - Where the mains plug or an appliance coupler is used as the

disconnect device, the disconnect device shall remain readily operable.

14. Outdoor Antenna Grounding - If an outside antenna or cable system is

connected to the product, be sure the antenna or cable system is grounded so

as to provide some protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information

with regard to proper grounding of the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit, size of grounding conductors,

location of antenna discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode.

NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer’s attention to Section

820-40 of the NEC which provides guidelines for proper grounding and, in particular,

species that the cable ground shall be connected to the grounding system of the

building, as close to the point of cable entry as practical.

15. Lightning - For added protection for this product during a lightning storm, or

when it is left unattended and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system. This will prevent damage

to the product due to lightning and power-line surges.

16. Power Lines - An outside antenna system should not be located in the vicinity

of overhead power lines or other electric light or power circuits, or where it can

fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines or circuits

as contact with them might be fatal.

17. Overloading - Do not overload wall outlets, extension cords, or integral

convenience receptacles as this can result in a risk of re or electric shock.

18. Flame Sources - No naked ame sources, such as lighted candles, should be

placed on the product.

19. Object and Liquid Entry - Never push objects of any kind into this product

through openings as they may touch dangerous voltage points or short-out parts

that could result in a re or electric shock. Never spill liquid of any kind on the

product.

20. Headphones - Excessive sound pressure form earphones and headphones can

cause hearing loss.

21. Damage Requiring Service - Unplug this product from the wall outlet and refer

servicing to qualied service personnel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the operating

instructions as an improper adjustment of other controls may result in

damage and will often require extensive work by a qualied technician to

restore the product to its normal operation.

e. If the product has been dropped or damaged in any way.

f. When the product exhibits a distinct change in performance-this indicates a

need for service.

22. Replacement Parts - When replacement parts are required, be sure the service

technician has used replacement parts specied by the manufacturer or have the

same characteristics as the original part. Unauthorized substitutions may result in

re, electric shock, or other hazards.

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Produkt Specifikationer

Mærke:	NAD
Kategori:	Modtager
Model:	C 368
Bredde:	435 mm
Dybde:	390 mm
Højde:	100 mm
Vægt:	8600 g
Produktfarve:	Sort
Pakkevægt:	10100 g
Strømforbrug (standby):	0.5 W
Volumenkontrol:	Dreje
Frekvensområde:	10 - 85000 Hz
Forbindelsesteknologi:	Ledningsført
klirfaktor (THD):	0.009 %
Signal/støjforhold:	110 dB
Digital lyd koaksial indgang:	2
Digital akustisk og optisk indgang:	2
RMS udgangseffekt pr. kanal (4 Ohm):	80 W
RMS udgangseffekt pr. kanal (8 ohm):	80 W
Dynamisk effekt pr. kanal (4 Ohm):	240 W
Dynamisk effekt pr. kanal (8 Ohm):	145 W
Dæmpningsfaktor:	200
Dynamisk effekt pr. kanal (2 Ohm):	260 W