NAD CI 8-150 DSP V2 Manual

NAD Modtager CI 8-150 DSP V2

Læs gratis den danske manual til NAD CI 8-150 DSP V2 (18 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om NAD CI 8-150 DSP V2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/18

Owner’s Manual

ENGLISH

Multi-Channel Ampliﬁer

CI 8-150 DSP V2

ENGLISH

• Read instructions - All the safety and operating instructions should be read

before the product is operated.

• Retain instructions - The safety and operating instructions should be retained

for future reference.

• Heed Warnings - All warnings on the product and in the operating instructions

should be adhered to.

• Follow Instructions - All operating and use instructions should be followed.

• Cleaning - Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

• Attachments - Do not use attachments not recommended by the product

manufacturer as they may cause hazards.

• Water and Moisture - Do not use this product near water-for example, near a

bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a

swimming pool; and the like.

• Accessories - Do not place this product on an unstable cart, stand, tripod,

bracket, or table. The product may fall, causing serious injury to a child or adult

and serious damage to the product. Use only with a cart, stand, tripod, bracket,

or table recommended by the manufacturer, or sold with the product. Any

mounting of the product should follow the manufacturer’s instructions, and

should use a mounting accessory recommended by the manufacturer.

• Cart - A product and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the

product and cart combination to overturn.

• Ventilation - Slots and openings in the cabinet are provided for ventilation to ensure

reliable operation of the product and to protect it from overheating. These openings

must not be blocked or covered. The openings should never be blocked by placing

the product on a bed, sofa, rug, or other similar surface. This product should not be

placed in a built-in installation such as a bookcase or rack unless proper ventilation is

provided or the manufacturer’s instructions have been adhered to.

• Power Sources - This product should be operated only from the type of power

source indicated on the marking label and connected to a MAINS socket outlet

with a protective earthing connection. If you are noSt sure of the type of power

supply to your home, consult your product dealer or local power company.

• Power Cord Protection - Power-supply cords should be routed so that they

are not likely to be walked on or pinched by items placed upon or against them,

paying particular attention to cords at plugs, convenience receptacles, and the

point where they exit from the product.

• Mains Plug - Where the mains plug or an appliance coupler is used as the

disconnect device, the disconnect device shall remain readily operable.

• Outdoor Antenna Grounding - If an outside antenna or cable system is

connected to the product, be sure the antenna or cable system is grounded so

as to provide some protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information

with regard to proper grounding of the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit, size of grounding conductors,

location of antenna discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode.

• Lightning - For added protection for this product during a lightning storm, or

when it is left unattended and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system. This will prevent damage

to the product due to lightning and power-line surges.

• Power Lines - An outside antenna system should not be located in the vicinity

of overhead power lines or other electric light or power circuits, or where it can

fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines or circuits

as contact with them might be fatal.

• Overloading - Do not overload wall outlets, extension cords, or integral

convenience receptacles as this can result in a risk of ﬁre or electric shock.

• Flame Sources - No naked ﬂame sources, such as lighted candles, should be

placed on the product.

• Object and Liquid Entry - Never push objects of any kind into this product through

openings as they may touch dangerous voltage points or short-out parts that could

result in a ﬁre or electric shock. Never spill liquid of any kind on the product.

• Damage Requiring Service - Unplug this product from the wall outlet and refer

servicing to qualiﬁed service personnel under the following conditions:

– When the power-supply cord or plug is damaged.

– If liquid has been spilled, or objects have fallen into the product.

– If the product has been exposed to rain or water.

– If the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the operating

instructions as an improper adjustment of other controls may result in

damage and will often require extensive work by a qualiﬁed technician to

restore the product to its normal operation.

– If the product has been dropped or damaged in any way.

– When the product exhibits a distinct change in performance-this indicates a

need for service.

• Replacement Parts - When replacement parts are required, be sure the service

technician has used replacement parts speciﬁed by the manufacturer or have the

same characteristics as the original part. Unauthorized substitutions may result in

ﬁre, electric shock, or other hazards.

• Safety Check - Upon completion of any service or repairs to this product, ask the

service technician to perform safety checks to determine that the product is in

proper operating condition.

WARNING

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN

EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE

PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE

PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO

CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS

INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT

OPERATING AND MAINTENANCE SERVICING INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE APPLIANCE.

CAUTION REGARDING PLACEMENT

To maintain proper ventilation, be sure to leave a space around the unit (from the largest

outer dimensions including projections) than is equal to, or greater than shown below.

Left and Right Panels: 10 cm

Rear Panel: 10 cm

Top Panel: 10 cm

RESPONSIBLE PARTY

Lenbrook International

633 Granite Court

Pickering, ON L1W 3K1

Canada

Tel: 1 905 8316555

CAN ICES-3 (B)/NMB-3(B)

This Class B digital apparatus complies with Canadian ICES-3

EU CONFORMITY STATEMENT

This product and, if applicable, the supplied accessories are marked with

“CE” and comply therefore with the applicable harmonized European

standards listed under the Radio Equipment Directive 2014/53/EU and

EMC Directive 2014/30/EU.

This product is manufactured to comply with the radio interference requirements of EEC

DIRECTIVE 2004/108/EC.

IMPORTANT SAFETY INSTRUCTIONS

Produkt Specifikationer

Mærke:	NAD
Kategori:	Modtager
Model:	CI 8-150 DSP V2

Har du brug for hjælp?

Hvis du har brug for hjælp til NAD CI 8-150 DSP V2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager NAD Manualer

NAD CI 8-120 DSP V2 Manual

12 August 2025

NAD CI 8-150 DSP V2 Manual

12 August 2025

NAD M23 V2 Manual

19 Juni 2025

NAD D 3020 V2 Manual

28 Januar 2025

NAD M2 Manual

30 September 2024

NAD CI 8-150 DSP Manual

27 September 2024

20 September 2024

16 September 2024

15 September 2024

28 August 2024

Modtager Manualer

Nyeste Modtager Manualer

Musical Fidelity B1xi Manual

12 August 2025

Artsound MX60MKII Manual

12 August 2025

ESX Signum SX1000.1 Manual

12 August 2025

ESX Signum SX800.4 Manual

12 August 2025

ESX Signum SX800.2 Manual

12 August 2025

Mooer F15i Li Manual

12 August 2025

Yamaha MusicCast RX-S602 Manual

10 August 2025

Strong SRT 3032 Manual

10 August 2025

Yamaha TSR-700 Manual

9 August 2025

Yamaha R-N600 Manual

9 August 2025