NAD M17 V2i Manual

NAD Modtager M17 V2i

Læs gratis den danske manual til NAD M17 V2i (32 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 24 anmeldelser. Har du et spørgsmål om NAD M17 V2i, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/32
Owner’s Manual
ENGLISH
AV Surround Sound Preamp Processor
®
M17
ENGLISH
2
1. Read instructions - All the safety and operating instructions should be read
before the product is operated.
2. Retain instructions - The safety and operating instructions should be retained
for future reference.
3. Heed Warnings - All warnings on the product and in the operating instructions
should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water-for example, near a
bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a
swimming pool; and the like.
8. Accessories - Do not place this product on an unstable cart, stand, tripod,
bracket, or table. The product may fall, causing serious injury to a child or adult
and serious damage to the product. Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer, or sold with the product. Any
mounting of the product should follow the manufacturer’s instructions, and
should use a mounting accessory recommended by the manufacturer.
9. Cart - A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the
product and cart combination to overturn.
10. Ventilation - Slots and openings in the cabinet are provided for ventilation
to ensure reliable operation of the product and to protect it from overheating.
These openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s instructions have been
adhered to.
11. Power Sources - This product should be operated only from the type of power
source indicated on the marking label and connected to a MAINS socket outlet
with a protective earthing connection. If you are not sure of the type of power
supply to your home, consult your product dealer or local power company.
12. Power-Cord Protection - Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
13. Mains Plug - Where the mains plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily operable.
14. Outdoor Antenna Grounding - If an outside antenna or cable system is
connected to the product, be sure the antenna or cable system is grounded so
as to provide some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information
with regard to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer’s attention to Section
820-40 of the NEC which provides guidelines for proper grounding and, in particular,
species that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
15. Lightning - For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system. This will prevent damage
to the product due to lightning and power-line surges.
16. Power Lines - An outside antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits
as contact with them might be fatal.
17. Overloading - Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of re or electric shock.
18. Flame Sources - No naked ame sources, such as lighted candles, should be
placed on the product.
19. Object and Liquid Entry - Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short-out parts
that could result in a re or electric shock. Never spill liquid of any kind on the
product.
20. Headphones - Excessive sound pressure form earphones and headphones can
cause hearing loss.
21. Damage Requiring Service - Unplug this product from the wall outlet and refer
servicing to qualied service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualied technician to
restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance-this indicates a
need for service.
22. Replacement Parts - When replacement parts are required, be sure the service
technician has used replacement parts specied by the manufacturer or have the
same characteristics as the original part. Unauthorized substitutions may result in
re, electric shock, or other hazards.
IMPORTANT SAFETY INSTRUCTIONS

Produkt Specifikationer

Mærke: NAD
Kategori: Modtager
Model: M17 V2i

Har du brug for hjælp?

Hvis du har brug for hjælp til NAD M17 V2i stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager NAD Manualer

NAD

NAD CI 8-120 DSP V2 Manual

12 August 2025
NAD

NAD CI 8-150 DSP V2 Manual

12 August 2025
NAD

NAD M23 V2 Manual

19 Juni 2025
NAD

NAD D 3020 V2 Manual

28 Januar 2025
NAD

NAD M2 Manual

30 September 2024
NAD

NAD CI 8-150 DSP Manual

27 September 2024
NAD

NAD C326BEE Manual

20 September 2024
NAD

NAD C356BEE Manual

16 September 2024
NAD

NAD М22 V2 Manual

15 September 2024
NAD

NAD T 758 V3i Manual

28 August 2024

Modtager Manualer

Nyeste Modtager Manualer

Ram Audio

Ram Audio Pi4-6K D Manual

13 August 2025
Ram Audio

Ram Audio MDi8-2K7 D BS/P Manual

13 August 2025
Audiolab

Audiolab 8300MB Manual

13 August 2025
ESX

ESX Signum SE1500.1 Manual

13 August 2025
Pyle

Pyle PFOCUS16 Manual

12 August 2025
Musical Fidelity

Musical Fidelity B1xi Manual

12 August 2025
Artsound

Artsound MX60MKII Manual

12 August 2025
ESX

ESX Signum SX1000.1 Manual

12 August 2025
ESX

ESX Signum SX800.4 Manual

12 August 2025
ESX

ESX Signum SX800.2 Manual

12 August 2025