NAV-TV NTV-KIT483 Manual

NAV-TV Dash cam NTV-KIT483

Læs gratis den danske manual til NAV-TV NTV-KIT483 (4 sider) i kategorien Dash cam. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 5 anmeldelser. Har du et spørgsmål om NAV-TV NTV-KIT483, eller vil du spørge andre brugere om produktet?

Side 1/4
BHM
09/28/15
NTV-DOC 154
rB4
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product. :
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
1 | P a g e
3950 NW 120th Ave, Coral Springs, FL 33 TEL 561-955-9770 FAX 561-955-9760 065
www.nav-tv.com info@nav-tv.com
MB Sprinter-CAM
NTV-KIT477
Overview
The MB Sprinter-CAM allows the user to add an aermarket rear camera to the factory screen on the
Mercedes Sprinter. If desired, forced camera is an opon through a mounted toggle switch (not included).
ATTENTION: This module locks the VIN and can only be used on ONE vehicle at a me. to
Kit Contents
Plug & Play T Harness
NTV-HAR 081
SMB to RCA Adapter
NTV-CAB007
USB Cable (updates)
NTV-CAB009
MB Sprinter-CAM
Module
NTV-ASY171
CAN-XG Adapter
NTV-HAR058
BHM
09/28/15
NTV-DOC 154
rB4
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product. :
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
2 | P a g e
Module Pin Outs
PIN #
Color
1
Yellow
2
Red
3
Blue
4
Pink
8
White/Green
9
Brown/Black
10
Black
17
Green
18
Brown
Installaon
1. Remove the factory radio. This requires pulling panels and removing screws. Disconnect all connected
harnesses and set the radio aside.
2. Connect the male end of the factory 44-pin plug to the female end of the provided Plug & Play T-
Harness.
3. Disconnect the two smaller plugs on the factory 44-pin plug and connect
them both to the male end of the provided Plug & Play T-Harness.
4. Connect the harness to the 8-pin plug located in the center of the CAN-XG Adapter Plug & Play T-
Harness.
5. Connect the to the 18-pin Molex MB Sprinter-CAM module
connector on the end of the . CAN-XG Adapter
Wire Side


Produkt Specifikationer

Mærke: NAV-TV
Kategori: Dash cam
Model: NTV-KIT483

Har du brug for hjælp?

Hvis du har brug for hjælp til NAV-TV NTV-KIT483 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Dash cam NAV-TV Manualer

NAV-TV

NAV-TV NTV-KIT057 Manual

4 November 2022
NAV-TV

NAV-TV NTV-KIT457 Manual

4 November 2022
NAV-TV

NAV-TV NTV-KIT389 Manual

4 November 2022
NAV-TV

NAV-TV NTV-KIT518 Manual

4 November 2022
NAV-TV

NAV-TV NTV-KIT759 Manual

4 November 2022
NAV-TV

NAV-TV NTV-KIT391 Manual

4 November 2022
NAV-TV

NAV-TV NTV-KIT869 Manual

4 November 2022
NAV-TV

NAV-TV NTV-KIT589 Manual

4 November 2022
NAV-TV

NAV-TV NTV-KIT508 Manual

4 November 2022
NAV-TV

NAV-TV NTV-KIT878 Manual

4 November 2022

Dash cam Manualer

Nyeste Dash cam Manualer

Rexing

Rexing V5C Plus Manual

12 August 2025
Mio

Mio MiVue R850T Manual

11 August 2025
Pyle

Pyle PLCM7200 Manual

9 August 2025
Pyle

Pyle PLCM2720 Manual

9 August 2025
Pyle

Pyle PLCMDVR77 Manual

9 August 2025
Dometic

Dometic RVS 536 Manual

7 August 2025
Cobra

Cobra FV-EV1 Manual

5 August 2025
Alpine

Alpine DVR-F790 Manual

3 August 2025
Pro User

Pro User DRC5040 Manual

2 August 2025