Nemco 55550-8 Manual

Nemco Skæremaskine 55550-8

Læs gratis den danske manual til Nemco 55550-8 (1 sider) i kategorien Skæremaskine. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Nemco 55550-8, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Easy Wedger™ and Easy Apple Corer™

N55550-4 4 Section Wedge

N55550-6 6 Section Wedge

N55550-8 8 Section Wedge

N55550-10 10 Section Wedge

N55550-8C 8 Section Corer

OPERATING AND MAINTENANCE INSTRUCTIONS

Important

1. To get the best operation and life from your machine, please read and comply with these instructions.

2. Clean machine thoroughly before and after each use using cleaning instructions below.

3. Minimize the use of alkaline cleaners as they may cause pitting and dulling of the finish.

Safety Instructions

Remember the blades are VERY SHARP! Be careful when handling and operating the machine to keep hands away from the

blades.

Preparation

1. Your Easy Wedger™ and Easy Apple Corer™ comes to you fully assembled.

2. Place the unit on a good firm work surface.

3. If unit fails to operate properly when first used call NEMCO customer service at 1-800-782-6761.

Operation

1) Lift PUSH BLOCK and place the produce on the BLADE ASSEMBLY.

2) Remove hand/fingers from the cutting area and with a strong, quick thrust bring the PUSH BLOCK down to force the produce

through the BLADES.

3) Clean the machine after wedging is completed using cleaning instructions below.

Cleaning

1) Lift PUSHER BLOCK off GUIDE RODS.

2) Remove screws from bottom of the FRAME to release the BLADE ASSEMBLY.

3) Thoroughly wash the PUSH BLOCK, BLADE ASSEMBLY and the FRAME.

4) Reassemble by reversing the procedure.

To Lubricate

When needed, lubricate the GUIDE RODS with mineral oil, food grade grease or rub them with paraffin. DO NOT LUBRICATE WITH

COOKING OIL – IT GETS STICKY!

NEMCO FOOD EQUIPMENT

301 Meuse Argonne, Hicksville, OH 43526

Phone: (419) 542-7751 Fax: (419) 542-6690 Toll free: 1-800-782-6761

46022

www.nemcofoodequip.com

9-21-2009

Produkt Specifikationer

Mærke:	Nemco
Kategori:	Skæremaskine
Model:	55550-8

Har du brug for hjælp?

Hvis du har brug for hjælp til Nemco 55550-8 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skæremaskine Nemco Manualer

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

Nemco 56450A-1 Manual

14 Juni 2025

Nemco 55250A Manual

13 Juni 2025

Nemco 57500-1 Manual

13 Juni 2025

Nemco 55150C Manual

13 Juni 2025

Nemco 55200AN-2 Manual

13 Juni 2025

Skæremaskine Manualer

Nyeste Skæremaskine Manualer

GARDE 181FC38 Manual

14 Juni 2025

Choice 407ONSLIC316 Manual

14 Juni 2025

Vollrath 403NH Manual

14 Juni 2025

Vollrath 700-1 Manual

14 Juni 2025

GARDE 181FC14WM Manual

14 Juni 2025

Globe SG13 Manual

14 Juni 2025

Vollrath 606N Manual

14 Juni 2025

Choice 40725TS Manual

14 Juni 2025

Vollrath 400N Manual

14 Juni 2025

Vollrath 47703 Manual

14 Juni 2025