NUVO 62/1763 Manual

NUVO Lys 62/1763

Læs gratis den danske manual til NUVO 62/1763 (4 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om NUVO 62/1763, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

WARNING: Risk of Fire or Electric Shock

• Disconnect power before installation or maintenance of the xture.

• LED Retrot Kit installation requires knowledge of luminaires electrical

systems. If not qualied, do not attempt installation. Contact a qualied

electrician.

• Do not make or alter any open holes in an enclosure of wiring or electrical

components during kit installation.

• To prevent wiring damage or abrasion, do not expose wiring to edges of

sheet metal or other sharp objects.

• The product is purposed for interior use only, suitable for wet locations.

• Protect the product against direct contact with water.

• Assemble the product only with the use of parts provided and the housing;

improper assembly may result in device failing which could damage the

product, personal property or cause injury.

• CAUTION: When handling the xture, do not apply pressure to the LEDs.

Hold the xture by the base only.

LED DISK AND SURFACE

MOUNT FIXTURES

Models: 62-1751, 62-1752, 62-1761, 62-1762, 62-1763

Satco Products, Inc.

Brentwood, NY 11717

INSTALLATION – Junction Box

INSTALLATION AND SAFETY INSTRUCTIONS

IMPORTANT: Read before installing xture. Retain for future reference.

NOTE: Turn OFF main power at the circuit breaker.

1. Connect the luminaire to supply wires with wire nuts

(included) (Figure A).

2. Remove lens by turning counter clockwise to unlock

(Figure B).

3. Mount luminaire to the junction box and screws

through the keyhole slots (Figure C). Mounting bracket

needed for 3" junction box only.

62-1761, 62-1762, 62-1763

62-1751, 62-1752

4. Replace lens and twist clockwise to lock (Figure D).

IMPORTANT: Should mounting holes not line up with

hole(s) in junction box, secure the Opal to the ceiling

material using compatible screws making sure to

completely cover junction box.

NOTE: If the luminaire includes the optional LED color

temperature selectable switch, select the desired LED

color temperature.

Figure A Figure B Figure C Figure D

INSTALLATION – Retrot Lamp Replacement

NOTE: Turn OFF main power at the circuit breaker.

1. Remove existing trim and light bulb from the

recessed housing to reveal the medium base socket.

If applicable, remove socket from plate.

2. Remove luminaire’s lens by turning counter clockwise

to unlock.

3. Attach torsion springs to luminaire with screws and

replace lens (Figure E).

4. Connect luminaire’s wires to medium base socket

adapter with wire nuts (Figure F).

ELECTRICAL CONNECTION

Connect the xture input wires to Junction Box wires

as shown in the Wiring Diagram, making sure all wire

connectors are secure.

If the Junction Box has a Ground Wire (Green or Bare

Copper), connect the xture’s Ground Wire to it. After

wires are connected, tuck them carefully inside the

Junction Box.

Dimming

This product is compatible with most residential

type dimmers available on the market. The dimming

performance will depend on kind of dimmer and dimmer

settings. Visit Satco.com for an up to date list

of compatible dimmers.

Cleaning

Clean with a soft or damp cloth, make sure the power

is OFF. Do not clean with liquids or abrasives.

WIRING DIAGRAM

5. Screw in medium base socket adapter into medium

base socket (Figure G).

6. Squeeze both torsion springs together and insert the

torsion springs to the housing’s slot (Figure G).

7. Safely place all wires into the housing and carefully

push the luminaire into the housing (Figure H).

NOTE: If the luminaire includes the optional LED color

temperature selectable switch, select the desired LED

color temperature.

Figure E Figure F Figure G Figure H

5-YEAR LIMITED WARRANTY

The purchased product is covered with a 5-year warranty in respect of any defect in material or workmanship after

purchase date. Satco shall bear no responsibility on account of guarantee, as well as shall bear no liability for any faults,

in case of improper operation, use negligence, accident or exposure to natural hazard, or excessive use over the limits

specied for the unit, or if any unauthorized alteration or repair followed.

Produkt Specifikationer

Mærke:	NUVO
Kategori:	Lys
Model:	62/1763

Har du brug for hjælp?

Hvis du har brug for hjælp til NUVO 62/1763 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lys NUVO Manualer

NUVO Glamour 60/998 Manual

6 Juli 2025

NUVO 62/797 Manual

6 Juli 2025

NUVO Ballerina 60/320 Manual

5 Juli 2025

NUVO Ballerina 60/317 Manual

5 Juli 2025

NUVO 62/1763 Manual

5 Juli 2025

NUVO 62/1752 Manual

5 Juli 2025

NUVO Glacier 60/7812 Manual

5 Juli 2025

NUVO Odeon 60/2873 Manual

5 Juli 2025

NUVO Harlow 60/4622 Manual

5 Juli 2025

NUVO Ceres 62/1481 Manual

5 Juli 2025

Lys Manualer

Nyeste Lys Manualer

Fotodiox P60 Manual

6 Juli 2025

Maxim Shoreline 10104 Manual

6 Juli 2025

Schneider Exiway Smartled OVA48314 Manual

6 Juli 2025

Milwaukee M18 ONERSAL Manual

6 Juli 2025

Schneider OVA48923 Manual

6 Juli 2025

Schneider OVA38359 Manual

6 Juli 2025

Quoizel Darius DRS1911EK Manual

6 Juli 2025

Schneider OVA48605 Manual

6 Juli 2025

Kalco Beechwood 505271RM Manual

6 Juli 2025

Milwaukee M18 PAL Manual

6 Juli 2025