NUVO Bridgeview 60/1709 Manual

NUVO Lys Bridgeview 60/1709

Læs gratis den danske manual til NUVO Bridgeview 60/1709 (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7 anmeldelser. Har du et spørgsmål om NUVO Bridgeview 60/1709, eller vil du spørge andre brugere om produktet?

Side 1/2
ASSEMBLY INSTRUCTION
SKU#60/1709
NOTE: Please consult a qualified electrician if you are not certain of installation or servicing.
CAUTION: Before starting installation or servicing, disconnect power by turning off the circuit breaker or
by removing the fuse at the fuse box.
1. Carefully unpack the fixture, lay out all parts on a clean surface.
2. Fasten the Cross Bar to Outlet Box using the provided Outlet Box Screws.
3. Connect wires white to white and black to black. Cover connections with provided Wire Connectors. Tie
4. Place fixture body against wall by aligning the protruding Mounting Screws all the way through Wall Plate
and tighten the Lock Nuts to the Mounting Screws until the fixture body is held firmly against the wall.
5. Unscrew the Socket Ring from the Socket. Place the Shade over the Socket and reattach the Socket Ring to
the Socket to secure the Shade.
6. Install the Bulb. (Not included).
7. Turn on power.
A Satco Product


Produkt Specifikationer

Mærke: NUVO
Kategori: Lys
Model: Bridgeview 60/1709

Har du brug for hjælp?

Hvis du har brug for hjælp til NUVO Bridgeview 60/1709 stil et spørgsmål nedenfor, og andre brugere vil svare dig