Optex SL-200QN Manual

Optex Ikke kategoriseret SL-200QN

Læs gratis den danske manual til Optex SL-200QN (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Optex SL-200QN, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

-1-

INSTALLATION INSTRUCTIONS

No. 59-1882-0

PHOTOELECTRIC DETECTOR

Smart Line series

• Quad high power beams

• Smart design

- Slim body design

- Easy-to-see vivid interior color for optical alignment

- IP65 waterproof structure

• View finder with 2X magnification

• Various options (refer to page 12)

( HU-3, ABC-4, BC-4, CBR-4, PSC-4, BAU-4 )

• Beam interruption adjustment function

• Tamper function

PHOTOELECTRIC DETECTOR

Smart Line series

FEATURES

INTRODUCTION

1-1 BEFORE YOUR OPERATION ....................... 1

1-2 PRECAUTIONS

.......................................................

1-3 PARTS IDENTIFICATION

.....................................

INSTALLATION

2-1 SEPARATING................................................. 3

2-2 WIRING ..........................................................3

2-3 TERMINAL .....................................................4

2-4 WIRING DIAGRAM ........................................4

2-5 WIRING DISTANCE BETWEEN POWER

SUPPLY AND DETECTOR ............................ 4

2-6 WALL MOUNTING .........................................5

2-7 POLE MOUNTING ......................................... 6

CONTENTS

2-8 MOUNTING IN THE BEAM TOWER..............7

FUNCTION SETTING

3-1 BEAM INTERRUPTION ADJUSTMENT........ 8

OPTICAL ALIGNMENT

4-1 OPTICAL ALIGNMENT FOR UPPER AND

LOWER BEAM............................................... 8

OPERATION CHECK ........................................... 9

OPTIONAL SETTING

6-1 HEATER UNIT HU-3 (OPTION) .................... 10

DIMENSIONS...................................................... 10

TROUBLESHOOTING ........................................ 11

SPECIFICATIONS ............................................... 11

OPTIONS ............................................................ 12

Detection range

SL-200QN

SL-350QN

SL-650QN

60m/200ft.

100m/350ft.

200m/650ft.

Model

Warning

Caution

• Read this instruction manual carefully prior to installation.

• After reading, store this manual carefully in an easily accessible place for reference.

• This manual uses the following warning indications for correct use of the product, harm to you or other people and damage to your assets, which

are described below. Be sure to understand the description before reading the rest of this manual.

INTRODUCTION

1-1 BEFORE YOUR OPERATION

Failure to follow the instructions provided with this indication and improper handling may cause

death or serious injury.

Failure to follow the instructions provided with this indication and improper handling may cause

injury and/or property damage.

This symbol indicates prohibition. The specific prohibited action is provided in and/or around the figure.

This symbol requires an action or gives an instruction.

Warning

Caution

Do not use the product for purposes other than the detection of moving objects such as

people and vehicles. Do not use the product to activate a shutter, etc., which may

cause an accident.

Do not touch the unit base or power terminals of the product with a wet hand (do not

touch when the product is wet with rain, etc.). It may cause electric shock.

Never attempt to disassemble or repair the product. It may cause fire or damage to the

devices.

Do not exceed the voltage or current rating specified for any of the terminals during

installation, doing so may cause fire or damage to the devices.

Do not pour water over the product with a bucket, hose, etc. The water may enter,

which may cause damage to the devices.

Clean and check the product periodically for safe use. If any problem is found, do not

attempt to use the product as it is and have the product repaired by a professional

engineer or electrician.

™

-2-

1-2 PRECAUTIONS

This symbol indicates prohibition. This symbol indicates recommendation.

Receiver

Transmitter

(another

detector)

Receiver

(another

detector)

Transmitter

At least 1 m (3.3 ft.)

Do not install the unit on an

unstable surface.

Do not install the pole in a

location where sufficient

stability can not be ensured.

Do not install the unit in a

location where trees, leaves, or

other objects that may swing in

the wind and block the beam.

Do not install the receiver in a

location where it is exposed to

direct sunlight.

Install the unit at a height

where an object can be

detected without fail.

Do not allow the infrared beam

from another detector to reach

the receiver.

Install the unit at least 1 m (3.3

ft.) away from the wall or fence

that may be running parallel to

the beam.

The pole size should be

34 - 48 mm

( 1.34 - 1.89 inch).

[Receiver]

Transmitter Receiver

1-3 PARTS IDENTIFICATION

Cover Main unit Chassis

Cover lock screw

Cut bush

for wiring

Main unit base

Mounting screw holes

Pole mounting

screw holes

Pole mounting

screw holes

Wall mounting

screw holes

Beam blocking plate

FUNCTION SETTING SECTION >> ACCESSORIES >>

U-brackets: 4

Pole brackets: 4

4×20 self tapping for wall mounting

(with rubber washer): 4

M4×30 screws for pole mounting

(with rubber washer): 8 Beam blocking plate: 2

(attached on the back of the cover)

3×6 self tapping for pole bracket: 4

Banding bands: 4

View finder

Terminals

Vertical alignment dial

Horizontal alignment dial

Optical lens

Horizontal alignment dial

View finder

Optical lens

Tamper button

Monitor jack (+)

Monitor jack (-)

Alarm indicator

Dip switch

Power indicator

Produkt Specifikationer

Mærke:	Optex
Kategori:	Ikke kategoriseret
Model:	SL-200QN
Kode for international beskyttelse (IP):	IP65
Bredde:	79 mm
Dybde:	96 mm
Højde:	448 mm
Vægt:	2400 g
Produktfarve:	Sort
Omgivelsestemperatur (min):	-25 °C
Omgivelsestemperatur (maks):	60 °C
Gear rækkevidde:	100 - 1000 m