Optex SL-350QFR Manual

Optex Ikke kategoriseret SL-350QFR

Læs gratis den danske manual til Optex SL-350QFR (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Optex SL-350QFR, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
-1-
INTRODUCTION
1-1 BEFORE YOUR OPERATION 1
1-2 PRECAUTIONS 2
1-3 PARTS IDENTIFICATION 2
PREPARATIONS
2-1 ORDERING DETECTOR BATTERIES 2
2-2
CHECKING THE WIRELESS TRANSMITTER SIZE
2
INSTALLATION
3-1 SEPARATING 3
3-2 WALL MOUNTING 3
3-3 POLE MOUNTING 5
3-4 MOUNTING IN THE BEAM TOWER 6
3-5
MOUNTING EXAMPLE AT PARTICULAR CASE
6
3-6 WIRING 7
SETTING
4-1 FUNCTION 8
4-2 OPTICAL ALIGNMENT 9
4-3 OPTIONAL SETTINGS 10
OPERATION CHECK
5-1 LED INDICATION 10
5-2 OPERATION CHECK 10
TROUBLESHOOTING
6-1 TROUBLESHOOTING 11
DIMENSIONS
7-1 DIMENSIONS 11
SPECIFICATIONS
8-1 SPECIFICATIONS 11
OPTIONS
9-1 OPTIONS 12
Warning
Caution
Warning
Caution
1
2
3
4
5
6
7
8
9
INSTALLATION INSTRUCTIONS
No. 59-1880-1
CONTENTS
FEATURES
Failure to follow the instructions provided with
this indication and improper handling may cause
death or serious injury.
Failure to follow the instructions provided with
this indication and improper handling may cause
injury and/or property damage.
• Read this instruction manual carefully prior to installation.
• After reading, store this manual carefully in an easily accessible
place for reference.
• This manual uses the following warning indications for correct use
of the product, harm to you or other people and damage to your
assets, which are described below. Be sure to understand the
description before reading the rest of this manual.
This symbol indicates prohibition. The specific prohibited
action is provided in and/or around the figure.
This symbol requires an action or gives an instruction.
INTRODUCTION
1
1-1
BEFORE YOUR OPERATION
Detection range 100m/350ft.
SL-350 QFR
SL-350 QNR
Detection range 100m/350ft.
4 selectable beam frequencies
•
Battery-operated detector
- Battery life:
Transmitter Approx. 4 years (2 in the transmitter)
Receiver Approx. 5 years (2 in the receiver)
(when using LSH20 (3.6V, 13Ah) batteries manufactures by SAFT)
- Up to 8 batteries (4 in the transmitter, 4 in the receiver)
(normal operation requires 2 batteries)
- Battery saving function
- Intermittent output function
- Spacious back bck box for numerous wireless transmitter
• Quad high power beams
• Smart design
- Slim body design
- Easy-to-see vivit interior color for optical alignment
-
IP65
waterproof
structure
•
4 channel beam frequency selector (SL-350QFR only)
• Viewfinder with 2X magnification
•
Beam interruption adjustment function
•
D.Q. circuit (environmental disqualification)
•
Tamper function
•
LED indicator for an easy alignment
• Various options (refer to page 12)
( ABC-4, BC-4, BCU-4, PSC-4, SBU-4, BAU-4, EC-4 )
Do not use the product for purposes other than the detection
of moving objects such as people and vehicles.
Do not use the product to activate a shutter, etc., which may
cause an accident.
Do not touch the unit base or power terminals of the
product with a wet hand (do not touch when the product
is wet with rain, etc.). It may cause electric shock.
Never attempt to disassemble or repair the product. It may
cause fire or damage to the devices.
Do not use batteries that have different levels of power
remaining (i.e., new and used batteries).
Not observing the above may result in an explosion, leakage
of electrolyte, emission of toxic gases or other outcomes that
may be harmful to people and property.
[Handling of Batteries]
Do not recharge, short circuit, crush, disassemble, exceed
heat above 100°C (212°F), incinerate, or expose contents to
water. Do not solder directly to the cell.
Not observing the above may result in fire, explosion or
severe burn hazard.
Do not solder directly to the cell.
Do not pour water over the product with a bucket, hose, etc.
The water may enter, which may cause damage to the
devices.
Clean and check the product periodically for safe use. If any
problem is found, do not attempt to use the product as it is
and have the product repaired by a professional engineer or
electrician.
BATTERY OPERATED
PHOTOELECTRIC DETECTOR
Smart Line series
BATTERY OPERATED
PHOTOELECTRIC DETECTOR
Smart Line series
™
™
-2-
Use two wireless transmitters for each receivers and transmitters of
the detector. When wireless transmitters with two or more inputs are
available, use one in each transmitter and receiver of tne detector.
The following figure shows the dimensions of the enclosure that will
house the wireless transmitter.
Recommended batteries: Two LSH20 batteries manufactured by
SAFT (can be added up to four batteries.)
For information about batteries, visit the following website and
contact your local SAFT sales representative.
http://www.saftbatteries.com/Contacts/tabid/72/FP/9/FROM/PROD
UIT/Default.aspx
• Be sure to monitor the alarm and low battery outputs.
• To monitor the tamper output, include a wireless transmitter
supporting three or more inputs into the system.
Note>>
1-2
PRECAUTIONS
PREPARATIONS
2
2-1
ORDERING DETECTOR BATTERIES
2-2
CHECKING THE WIRELESS
TRANSMITTER SIZE
1-3
PARTS IDENTIFICATION
Do not install the unit on an
unstable surface.
Do not install the pole in a
location where sufficient stability
can not be ensured.
Do not install the unit in trees,
leaves, or other objects that
may swing in the wind and
block the beam.
Do not install the receiver in a
location where it is exposed to
direct sunlight.
Install the unit at a height where
an object can be detected
without fail.
The pole size should be 34 -
48 mm ( 1.34" - 1.89").
Do not allow the infrared beam
from a different model to reach
the receiver.
Install the unit at least 1 m (3.3
ft.) away from the wall or fence
that may be running parallel to
the beam.
Accessories>>
Velcro tape: 2 sets
U-brackets: 4
Pole brackets
(with double-sided tape): 4
4×20 self tapping for wall mounting
(with rubber washer): 12
M4×30 screws for pole mounting
(with rubber washer): 8
Beam blocking plate: 2
(attached on the back of the cover)
Cables: 3
Banding bands: 2
This symbol indicates prohibition.
This symbol indicates recommendation.
1 m (3.3 ft.)
Back box
Unit: mm (inch)
175(6.8)
39(1.5)
66.2(2.6)
42(1.6)
182(7.1)
Chassis Back boxMain unitCover
Monitor jack
Dip SW
Viewfinder
Viewfinder
Optical
alignment dial
Tamper
lock plate
Tamper button
Optical
alignment dial
Optical lens
Optical lens
Waterproof
packing
Cover lock screw
Caution
• Be sure to install the chassis, waterproof packing and
back box altogether. Not doing so may compromise
IP rate of this product.
Receiver
Transmitter
(another
detector)
Receiver
(another
detector)
Transmitter

Produkt Specifikationer

Mærke: Optex
Kategori: Ikke kategoriseret
Model: SL-350QFR

Har du brug for hjælp?

Hvis du har brug for hjælp til Optex SL-350QFR stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Optex Manualer

Optex

Optex OVS-50TNR Manual

28 September 2025
Optex

Optex InSight INS-HX-80N Manual

10 August 2025
Optex

Optex AX-100TF Manual

23 Juli 2025
Optex

Optex CX-702RS Manual

19 Juni 2025
Optex

Optex RLS-PB2 Manual

26 Januar 2025
Optex

Optex QXI-DT-X5 Manual

14 December 2024
Optex

Optex WXI-R Manual

5 December 2024
Optex

Optex VXS-AM Manual

5 December 2024
Optex

Optex SIP-5030-IP-BOX Manual

5 December 2024
Optex

Optex AX-100TFR Manual

5 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Icy Box

Icy Box IB-MS404-T Manual

17 Oktober 2025
LC-Power

LC-Power Platinum Pro LC1000P2 V3.1 Manual

17 Oktober 2025
Hagor

Hagor 3215 Manual

17 Oktober 2025
Menuett

Menuett 005-908 Manual

17 Oktober 2025
FBT

FBT MPU 4060 Manual

17 Oktober 2025
Metz

Metz 130E405032-E Manual

17 Oktober 2025
Hagor

Hagor 3210 Manual

17 Oktober 2025
Lucide

Lucide Concri 05910/10/36 Manual

17 Oktober 2025
Hagor

Hagor 3232 Manual

17 Oktober 2025
IFi Audio

IFi Audio GO blu Air Manual

17 Oktober 2025