Ozito CMS-1621 Manual

Ozito Sav CMS-1621

Læs gratis den danske manual til Ozito CMS-1621 (8 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Ozito CMS-1621, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

COMPOUND

MITRE SAW

CMS-1621

STANDARD EQUIPMENT

3 YEAR REPLACEMENT WARRANTY*

Your product is guaranteed for a period of If 36 months from the original date of purchase.

a product is defective it will be replaced in accordance with the terms of this warranty. Warranty

excludes consumable parts, for example: valve adapters and accessories.

*This product is intended for DIY use only and replacement warranty covers domestic use.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other than that speciﬁed on the tool.

• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents

or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.

210MM (8¼”)

INSTRUCTION MANUAL

SPECIFICATIONS

Mains Voltage: 220–240V ~ 50Hz

Motor Power: 1400W (S1);

1600W (S6 40%)

No Load Speed: 5,000/min

Blade: Ø210 x Ø16 x 2.8mm (48T)

Mitre Angle: 0-45° Left & Right

Bevel Angle: 0-45° Left

Max. Cutting Capacities:

Mitre 0° x Bevel 90°: 55 x 120mm

Mitre 45° x Bevel 90°: 55 x 80mm

Mitre 0° x Bevel 45°: 32 x 120mm

Mitre 45° x Bevel 45°: 32 x 80mm

Weight: 7.1kg

ozito.com.au

Compound Mitre Saw

2 x Material Support Bars

2 x Hex Keys & Dust Bag

0821

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY

YOU MUST RETURN THE PRODUCT TO YOUR NEAREST

BUNNINGS WAREHOUSE WITH YOUR BUNNINGS

PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR

CUSTOMER SERVICE HELPLINE:

Australia: 1800 069 486

New Zealand: 0508 069 486

The beneﬁts provided under this warranty are in addition to other rights and remedies which

are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to a

replacement or refund for a major failure and for compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the

goods fail to be of acceptable quality and the failure does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this warranty,

however, where you have suffered any additional direct loss as a result of a defective product

you may be able to claim such expenses by contacting our customer service helpline above.

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE

THE MODEL NUMBER AND DATE OF PURCHASE

AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE

WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS

YOU MAY HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

1. Safety Release Lever

2. Carry Handle

3. Retractable Blade Guard

4. On/Off Trigger

5. Cutting Handle

6. Motor

7. Lock Down Pin

8. Bevel lock

9. Material Support Bar

10. Mounting Point

11. Fence

12. Mitre Table

13. Mitre Table Lock

14. Material Clamp

COMPOUND MITRE SAW

KNOW YOUR PRODUCT

1. ASSEMBLY

SETUP & PREPARATION

9101112

ONLINE MANUAL

Scan this QR Code with your mobile

device to take you to the online manual.

Unpacking

1. Remove foam packaging materials and using the carry handle,

carefully lift the mitre saw from its box and place it on a level

work surface.

2. Release cutting

head from

its transport

position. While

holding the

head of the saw

down release

the lock down

pin.

Dust Bag

1. Squeeze the clamp at the end of the

dust bag, place over the dust extraction

port.

Note: The dust extraction port can block

easily with dust and requires to be

periodically cleaned. For more efﬁcient

operation, empty the dust bag when it is

no more than half full. This allows better

air ﬂow through the bag. Dust bags will not

collect all the saw dust generated by the

mitre saw. For best results a dust extractor

should be used in place of the dust bag.

Material Clamp

Material clamp will assist

securing timber when making

cuts.

The clamp can be mounted on

either the left or right.

Note: Use the locking knobs to

secure the material clamp.

When performing a bevel or compound

cut, the material clamp should be

positioned on the right hand side of the

fence.

HOLD

DOWN

WARNING! ENSURE THE TOOL IS TURNED OFF AND

DISCONNECTED FROM THE POWER SUPPLY BEFORE

PERFORMING ANY OF THE FOLLOWING OPERATIONS.

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Sav
Model:	CMS-1621

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito CMS-1621 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sav Ozito Manualer

Ozito PXBCS-1830 Manual

24 December 2024

Ozito TBS-254 Manual

8 Marts 2024

Ozito PXCPRSK-218U Manual

4 Marts 2024

Ozito OCS-018 Manual

3 Marts 2024

Ozito SCMS-1621MS Manual

25 Februar 2024

Ozito BSW-2581U Manual

13 Februar 2024

Ozito BSW-2581 Manual

27 Januar 2024

Ozito JSW-4000 Manual

25 December 2023

Ozito PCR-3100U Manual

3 December 2023

Ozito PLS-1214 Manual

23 November 2023

Sav Manualer

Nyeste Sav Manualer

RYOBI CS-1835 Manual

31 Juli 2025

Guede KS 450-55 Manual

31 Juli 2025

RYOBI CS-4016 Manual

31 Juli 2025

RYOBI RRS1801M Manual

31 Juli 2025

Skil 3540 CA Manual

31 Juli 2025

RYOBI One+ RPLS18X Manual

31 Juli 2025

RYOBI One+ RMS18254X Manual

31 Juli 2025

RYOBI RTBS18X Manual

31 Juli 2025

RYOBI CS-2240 Manual

31 Juli 2025

RYOBI RTS18C Manual

31 Juli 2025