Ozito PXBCS-1830 Manual

Ozito Sav PXBCS-1830

Læs gratis den danske manual til Ozito PXBCS-1830 (8 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 59 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 30 anmeldelser. Har du et spørgsmål om Ozito PXBCS-1830, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

PXBCS-1830

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other

than that specied on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty Warranty excludes consumable parts, for example: guide bar, chain

and included accessories.

OZITO. 25 Fox Drive, Dandenong South, Victoria 3175, Australia

MIN

300

(12”)

MIN

300

(12”)

STANDARD EQUIPMENT

Chainsaw

CHAINSAW

INSTRUCTION MANUAL

ozito.com.au

Guide Bar Cover

Guide Bar & Chain

SPECIFICATIONS

Input: 18V

Bar Length: 300mm (12”)

Cutting Length: 270mm max.

Chain Speed: 6.0 / 8.9 m/s

Chain Pitch: 9.53mm (3/8”)

Chain Gauge: 1.1mm (0.043”)

Oil Tank: 160ml max.

Sound Power Level: 100 dB

Weight: 4.03kg

0824

This product is intended for use by a competent

trained person. This user manual is a guide only and

should not be treated as a training manual.

• Please seek professional training before use.

• This product is designed for felling small trees, limbing of branches,

sawing wooden beams and pruning of trees, shrubs and bushes while

user is rmly footed on the ground.

1. ASSEMBLY

MIN

300

(12”)

MIN

300

(12”)

300

(12”)

4. Place the guide bar

and chain in position,

ensuring that the chain

is around sprocket

(A). Also ensure that

the threaded pin (B)

ts into the guide bar

tension dial.

If it does not t, it can

be adjusted slightly by

turning the dial.

5. Attach the side cover and secure it with

the guide bar lock knob. Do not fully

tighten the guide bar lock knob until after

adjusting the chain tension.

1. Completely unscrew the guide bar

lock knob, rotating in a counter

clockwise direction.

Fitting the Chain & Bar

2. Remove the side cover.

3. Fit the chain over the guide bar,

making sure that the cutters are

facing in the direction of rotation.

IMPORTANT: IF THE CHAIN IS INSTALLED BACKWARDS

(CHAIN CUTTERS ARE FACING IN THE OPPOSITE DIRECTION

OF ROTATION) THE CHAINSAW WILL VIBRATE EXCESSIVELY

AND NOT CUT.

WARNING!: ENSURE THE CHAINSAW IS SWITCHED

OFF AND THE BATTERY IS DISCONNECTED BEFORE

PERFORMING ANY OF THE FOLLOWING TASKS.

WARNING!: ALWAYS WEAR GLOVES WHEN HANDLING

THE CHAIN. THE CHAIN CUTTERS ARE SHARP AND

COULD CUT YOU.

KNOW YOUR PRODUCT SETUP & PREPARATION

1. Rear Handle

2. On/Off Trigger

3. Oil Level Window

4. Side Cover

5. Guide Bar Lock Knob

6. Hand Guard/Chain Brake

7. Chain Tension Dial

8. Guide Bar

9. Chain

10. Bucking Spikes

11. Front Handle/Carry Handle

12. Speed Control

13. Oil Tank Cap

14. Motor Cover

15. Battery Seating

16. Lock-Off Button

17. Guide Bar Cover

BRUSHLESS CHAINSAW

BATTERY & CHARGER

This tool is compatible with all battery and chargers

from the Ozito PXC Range.

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to the

online manual.

1 3 4 6 7 8

1410 11

1512 13

2 5

For convenience and ease of assembly, the chain is pre-tted over the

guide bar with the cutters facing in the direction of rotation. Refer to the

supplied A5 insert for further information before tting the bar & chain

for the rst time.

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Sav
Model:	PXBCS-1830

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito PXBCS-1830 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sav Ozito Manualer

Ozito TSB-0810 Manual

12 August 2025

Ozito TSF-1211U Manual

9 August 2025

Ozito SCMS-2125U Manual

9 August 2025

Ozito CMS-1621U Manual

9 August 2025

Ozito PXBCS-1830 Manual

24 December 2024

Ozito TBS-254 Manual

8 Marts 2024

Ozito PXCPRSK-218U Manual

4 Marts 2024

Ozito OCS-018 Manual

3 Marts 2024

Ozito SCMS-1621MS Manual

25 Februar 2024

Ozito BSW-2581U Manual

13 Februar 2024

Sav Manualer

Nyeste Sav Manualer

Milwaukee M12 Fuel 2521-20 Manual

13 August 2025

Milwaukee M28 0719-20 Manual

13 August 2025

Milwaukee M12 Fuel 2521-21HO Manual

13 August 2025

Milwaukee M18 2630-20 Manual

13 August 2025

Milwaukee M18 Fuel SAWZALL 2720-20 Manual

13 August 2025

Milwaukee TILT-LOK 6390-20 Manual

13 August 2025

Milwaukee M12 2429-20 Manual

13 August 2025

Milwaukee MX Fuel RAPIDSTOP MXF315 Manual

13 August 2025

Milwaukee M18 Fuel 2833-20 Manual

12 August 2025

Milwaukee M18 Fuel 2821-20 Manual

12 August 2025