Ozito MWR-090U Manual

Ozito Svejsemaskine MWR-090U

Læs gratis den danske manual til Ozito MWR-090U (3 sider) i kategorien Svejsemaskine. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Ozito MWR-090U, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

size 445 x 210 mm

Danger! - Read the operating instructions to re-

duce the risk of inquiry

Do not store or use the equipment in wet con-

ditions or in the rain. Use the equipment only

indoors.

The reprinting or reproduction by any other me-

ans, in whole or in part, of documentation and

papers accompanying products is permitted only

with the express consent of the iSC GmbH.

Subject to technical changes

MWR-090U

GB Additonal operating & safety instructions Gasless Mig Welder

MIN

MAX

Service information

We have competent service partners in all countries named on the guarantee certicate whose contact

details can also be found on the guarantee certicate. These partners will help you with all service re-

quests such as repairs, spare and wearing part orders or the purchase of consumables.

Please note that the following parts of this product are subject to normal or natural wear and that the

following parts are therefore also required for use as consumables.

Category Example

Wear parts* Torch Tip

Consumables* Wire Spool

Missing parts

* Not necessarily included in the scope of delivery!

In the eect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Plea-

se ensure that you provide a precise description of the problem and answer the following questions in all

cases:

• Did the equipment work at all or was it defective from the beginning?

• Did you notice anything (symptom or defect) prior to the failure?

• What malfunction does the equipment have in your opinion (main symptom)?

Describe this malfunction.

Mayr/Product-ManagementWeichselgartner/General-Manager

explains the following conformity according to EU directives and norms for

the following product

Mig Welder MWR-090U (Ozito)

2014/29/EU

2005/32/EC_2009/125/EC

2014/35/EU

2006/28/EC

X 2014/30/EU

2014/32/EU

2014/53/EC

2014/68/EU

90/396/EC_2009/142/EC

89/686/EC_96/58/EC

X 2011/65/EU

2006/42/EC

Annex IV

Noti ed Body:

Noti ed Body No.:

Reg. No.:

2000/14/EC_2005/88/EC

Annex V

Annex VI

Noise: measured LWA = dB (A); guaranteed LWA = dB (A)

P = KW; L/Ø = cm

Noti ed Body:

2012/46/EU

Emission No.:

Standard references: EN 60974-1; EN 60974-10

Landau/Isar, den 16.08.2016

First CE: 16 Archive-File/Record: NAPR014333

Art.-No.: 44.722.26 I.-No.: 11016 Documents registrar: Robert Gehard

Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar

ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar

Declaration of conrmity

Beiblatt_MWR_090U.indd 1 13.09.2016 17:21:30

size 445 x 210 mm

Items supplied

Please check that the article is complete as

specied in the scope of delivery. If parts are

missing, please contact our service center or the

sales outlet where you made your purchase at

the latest within 5 working days after purchasing

the product and upon presentation of a valid bill

of purchase. Also, refer to the warranty table in

the service information at the end of the operating

instructions.

• Open the packaging and take out the

equipment with care.

• Remove the packaging material and any

packaging and/or transportation braces (if

available).

• Check to see if all items are supplied.

• Inspect the equipment and accessories for

transport damage.

• If possible, please keep the packaging until

the end of the guarantee period.

Danger!

The equipment and packaging material are

not toys. Do not let children play with plastic

bags, foils or small parts. There is a danger of

swallowing or suocating!

Proper use

The machine is to be used only for its prescribed

purpose. Any other use is deemed to be a

case of misuse. The user / operator and not the

manufacturer will be liable for any damage or

injuries of any kind caused as a result of this.

The equipment is to be used only for its

prescribed purpose. Any other use is deemed to

be a case of misuse. The user / operator and not

the manufacturer will be liable for any damage or

injuries of any kind caused as a result of this.

Please note that our equipment has not been

designed for use in commercial, trade or industrial

applications. Our warranty will be voided if the

machine is used in commercial, trade or industrial

businesses or for equivalent purposes.

Technical data

Mains connection: ...........................230 V ~ 50 Hz

Welding current: ....................................... 60-90 A

Duty cycle: ........................................ 20% @ 60A

Idling voltage: .................................................31 V

Wire spool weight: ............................0.2 kg to 5 kg

Welding wire diameter: .......................0.8-0.9 mm

Weight: 18.2 kg .....................................................

Important information about the power

connection

This equipment falls under Class A of the stan-

dard EN 60974-10, i.e. it is not designed for use

in residential areas in which the power supply

is based on a public low-voltage supply system

because given unfavorable conditions in the pow-

er supply the equipment may cause interference.

If you want to use the equipment in residential

areas in the which the power supply is based on

a public low-voltage supply system, you must use

an electromagnetic lter which reduces the elec-

tromagnetic interference to the point where the

user no longer notices any disturbance.

In industrial parks or other areas in which the

power supply is not based on a public low-voltage

supply system the equipment can be used without

such a lter.

Safety clothing

1. While working, the welder must protect his en-

tire body from radiation and burns by wearing

suitable clothing and a face guard.

2. Slip-on gloves made of a suitable material

(leather) must be worn on both hands. They

must be in perfect condition.

3. Suitable aprons must be worn to protect clo-

thing from sparks and burns. A safety suit and,

if necessary, head protection must be worn if

required by the type of work in question, e.g.

overhead welding.

4. The protective clothing used as well as all

accessories must be in compliance with the

“Personal safety equipment” EU Directive.

Protection from radiation and burns

1. Provide information about the risk to eyes at

the working site in the form of a poster with

the wording “Caution – do not look at the a-

mes”. Workplaces are to be screened o

wherever possible so that personnel in the

vicinity are protected. Unauthorized persons

are to be kept away from the welding work.

2. The walls in the immediate vicinity of statio-

nary workplaces should not have a light color

or a sheen. Windows up to head height are

to be protected against radiation passing th-

rough them or reecting o them, for example

by coating them with a suitable paint.

For EU countries only

Never place any electric power tools in your

household refuse.

To comply with European Directive 2012/19/EC

concerning old electric and electronic equipment

and its implementation in national laws, old

electric power tools have to be separated from

other waste and disposed of in an environment-

friendly fashion, e.g. by taking to a recycling

depot.

Recycling alternative to the return request:

As an alternative to returning the equipment to

the manufacturer, the owner of the electrical

equipment must make sure that the equipment

is properly disposed of if he no longer wants to

keep the equipment. The old equipment can be

returned to a suitable collection point that will

dispose of the equipment in accordance with the

national recycling and waste disposal regulations.

This does not apply to any accessories or aids

without electrical components supplied with the

old equipment.

• The product meets the requirements of EN

60974-10 and is subject to special connection

conditions. This means that use of the product

at any freely selectable connection point is

not allowed.

• Given unfavorable conditions in the power

supply the product can cause the voltage to

fluctuate temporarily.

• The product is intended solely for use at

connection points that

a) do not exceed a maximum permitted sup-

ply impedance Zsys = 0.25 + j 0.25, or

b) have a continuous current-carrying capaci-

ty of the mains of at least 100 A per phase.

• As the user, you are required to ensure, in

consultation with your electric power compa-

ny if necessary, that the connection point at

which you wish to operate the product meets

one of the two requirements, a) or b), named

above.

Beiblatt_MWR_090U.indd 2 13.09.2016 17:21:30

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Svejsemaskine
Model:	MWR-090U

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito MWR-090U stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Svejsemaskine Ozito Manualer

Ozito AWG-964U Manual

31 August 2024

Ozito MWR-090U Manual

19 August 2024

Ozito AWG-964 Manual

3 August 2024

Ozito MWR-9045 Manual

26 Juli 2024

Svejsemaskine Manualer

Nyeste Svejsemaskine Manualer

Einhell NSG 180 F Manual

27 Marts 2025

Einhell NSG 230 F Manual

27 Marts 2025

Einhell NSG 270 F Manual

27 Marts 2025

Einhell RT-EW 150 Manual

10 Januar 2025

Anova SL160TIG Manual

5 Januar 2025

Lincoln Electric LF-74 Manual

4 Januar 2025

Lincoln Electric Idealarc DC-400 Manual

4 Januar 2025

Lincoln Electric Flextec 450 Manual

3 Januar 2025

Lincoln Electric Flextec 650 SUBARC Manual

3 Januar 2025

Lincoln Electric COOLARC 20 Manual

3 Januar 2025