Ozito MWR-9045 Manual

Ozito Svejsemaskine MWR-9045

Læs gratis den danske manual til Ozito MWR-9045 (8 sider) i kategorien Svejsemaskine. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Ozito MWR-9045, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
GASLESS
MIG WELDER
50 / 90 Amp
INSTRUCTION MANUAL
SPECIFICATIONS
Input Voltage: 240V ~ 50Hz
Welding Current: 50 / 90Amp
Welding Wire Size: 0.8, 0.9mm Flux-Cored Wire
Duty Cycle: 60%@50A, 10%@90A
Insulation Type: Class I
Max. Wire Spool Weight: 0.4kg
Weight (tool only): 14kg
MWR-9045
WHAT’S IN THE BOX
MIG Welder
Carrying Strap
Wire Feed Roller,
Shroud & Torch Tip
0.8mm Welding Wire
& Welding Mask
Chipping Hammer /
Wire Brush
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: Welding tips,
torch nozzles, flexible inner tube, welding wire, wire feed rollers,
welding lenses, wire brushes and chipping hammer.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
1118
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
MIG WELDER
ACCESSORIES
1 Wire Feed Speed
2 Carry Handle
3 Overload Protection LED
4 On/O󰀨Switch
5 Current Control Switch
6 Earth Clamp
7 MIG Torch
8 Torch Tip
9 Welding Mask
10 Chipping Hammer / Wire
Brush
11 Welding Wire (0.8mm)
12 Shroud (spare)
13 Torch Tip (spare)
14 Wire Feed Roller 0.8-0.9mm
(Fitted)
KNOW YOUR PRODUCT
1. WELDING MASK & CARRY STRAP
SETUP & PREPARATION
1 32 4 5
6 7 8
9 10 11 12 13 14
Fitting the Welding Screen
1 Insert the glass retaining pins
into the holes from the outside
ofthemaskandthentthe
retaining clips from the inside.
Rotate the clip to allow the
glass to be inserted.
3 Bend the sides and top of the
welding mask inwards and clip
together at the corners.
2 First insert the clear glass
into the recess of the welding
mask, followed by the dark
safety glass and then the
plastic frame.
Rotate the retaining clips to
lock in position.
4 Insert the 3 screws into the
handle mounting holes from
the outside. Fit the handle
onto the screws from inside
the mask and then secure
using the 3 nuts.
Theincludedweldingmaskmustbettedwiththeweldingscreenand
handle before using for welding.

Produkt Specifikationer

Mærke: Ozito
Kategori: Svejsemaskine
Model: MWR-9045

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito MWR-9045 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Svejsemaskine Ozito Manualer

Ozito

Ozito AWG-964U Manual

31 August 2024
Ozito

Ozito MWR-090U Manual

19 August 2024
Ozito

Ozito AWG-964 Manual

3 August 2024
Ozito

Ozito MWR-9045 Manual

26 Juli 2024

Svejsemaskine Manualer

Nyeste Svejsemaskine Manualer

Einhell

Einhell NSG 180 F Manual

27 Marts 2025
Einhell

Einhell NSG 230 F Manual

27 Marts 2025
Einhell

Einhell NSG 270 F Manual

27 Marts 2025
Einhell

Einhell RT-EW 150 Manual

10 Januar 2025
Anova

Anova SL160TIG Manual

5 Januar 2025
Lincoln Electric

Lincoln Electric LF-74 Manual

4 Januar 2025
Lincoln Electric

Lincoln Electric Idealarc DC-400 Manual

4 Januar 2025
Lincoln Electric

Lincoln Electric Flextec 450 Manual

3 Januar 2025
Lincoln Electric

Lincoln Electric Flextec 650 SUBARC Manual

3 Januar 2025
Lincoln Electric

Lincoln Electric COOLARC 20 Manual

3 Januar 2025