Ozito PXCCSS-018 Manual

Ozito Sav PXCCSS-018

Læs gratis den danske manual til Ozito PXCCSS-018 (8 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Ozito PXCCSS-018, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

SPECIFICATIONS

Input: 18V

Bar Length: 250mm (10”)

Cutting Length Max.: 230mm

Chain Speed: 4.3m/s

Chain Pitch: 9.53mm (3/8”)

Chain Gauge: 1.1mm (.043”)

Oil Tank Capacity: 200ml

Weight: 3.0kg

WHAT’S IN THE BOX

Chainsaw

Battery & Charger

sold separately

CORDLESS

CHAINSAW

INSTRUCTION MANUAL

ozito.com.au

Guide Bar Cover

Screwdriver

PXCCSS-018

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

0316

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other

than that specied on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty Warranty excludes consumable parts, for example: guide bar, chain

and included accessories.

CAUTION: THE CHARGER FOR THIS PRODUCT

SHOULD BE PROTECTED BY A RESIDUAL CURRENT

DEVICE (RATED AT 30mA OR LESS).

KNOW YOUR PRODUCT SETUP & PREPARATION

1. BATTERY & CHARGING (SOLD SEPARATELY)

1. Rear Handle

2. Trigger Switch

3. Oil Level Window

4. Chain Oil Tank Cap

5. Side Cover

6. Front Handle

7. Chain Brake

8. Guide Bar Locking Knob

9. Guide Bar

10. Chain

11. Bucking Spikes

12. Motor Cover

13. Lock-Off Button

14. Battery Seating

CORDLESS CHAINSAW

1 2 3 4 5 6 7 8

BATTERY & CHARGER (sold separately)

This tool is compatible with all battery and chargers from the Ozito

Power X Change Range.

The purchased battery will be shipped in a low charge condition, and requires charging

prior to use. Allow several cycles of charging and discharging (through use of the tool)

for the battery to reach its optimum performance / runtime.

1. Connect the charger into a mains power outlet.

4. The charger LED will illuminate

red signifying that the battery is

charging.

3. With the charger sitting on a at

surface, align the raised ribs on

the battery with the recess in the

charger and slide onto the charger

ensuring a rm connection.

2. The charger LED will ash green

showing power is being supplied

to the charger.

5. The charger LED will illuminate

green once the battery is fully

charged.

Charging your lithium ion battery - Fast Charger

Charger LED Indicator

LED Indicator Situation

GREEN (Flashing) Stand By (no battery pack is inserted)

RED (Flashing) Battery is charging (low charge)

RED (Illuminated) Battery is charging (mid charge)

GREEN (Illuminated) Battery is fully charged

BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin

automatically when battery reaches correct charging

temperature).

BOTH (Flashing) Defective battery. Never charge a defective battery

pack!

Remove battery pack from charger.

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to the

online manual.

ACCESSORIES

15 Guide Bar Cover 16 Screwdriver

15 16

11 12 13 14

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Sav
Model:	PXCCSS-018

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito PXCCSS-018 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sav Ozito Manualer

Ozito PXBCS-1830 Manual

24 December 2024

Ozito TBS-254 Manual

8 Marts 2024

Ozito PXCPRSK-218U Manual

4 Marts 2024

Ozito OCS-018 Manual

3 Marts 2024

Ozito SCMS-1621MS Manual

25 Februar 2024

Ozito BSW-2581U Manual

13 Februar 2024

Ozito BSW-2581 Manual

27 Januar 2024

Ozito JSW-4000 Manual

25 December 2023

Ozito PCR-3100U Manual

3 December 2023

Ozito PLS-1214 Manual

23 November 2023

Sav Manualer

Nyeste Sav Manualer

RYOBI CS-1835 Manual

31 Juli 2025

Guede KS 450-55 Manual

31 Juli 2025

RYOBI CS-4016 Manual

31 Juli 2025

RYOBI RRS1801M Manual

31 Juli 2025

Skil 3540 CA Manual

31 Juli 2025

RYOBI One+ RPLS18X Manual

31 Juli 2025

RYOBI One+ RMS18254X Manual

31 Juli 2025

RYOBI RTBS18X Manual

31 Juli 2025

RYOBI CS-2240 Manual

31 Juli 2025

RYOBI RTS18C Manual

31 Juli 2025