Ozito PXCSS-165 Manual

Ozito Sav PXCSS-165

Læs gratis den danske manual til Ozito PXCSS-165 (8 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Ozito PXCSS-165, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

STANDARD EQUIPMENT

PXCSS-165

INSTRUCTION MANUAL

SPECIFICATIONS

Input: 18V

No Load Speed: 4,200/min

Blade Diameter: 165mm (6.5”)

Blade Teeth: 24TCT

Blade Bore: 20mm

Depth of Cut: 54mm @ 90°

35mm @ 45°

Weight: 2.59kg

ozito.com.au

1121

Circular Saw

Rip Fence

Hex Key

165MM

CIRCULAR SAW

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other than that specied

on the tool.

• If the tool shows signs of damage or defects caused by or resulting from

abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty and are excluded from the warranty extension. Warranty excludes

consumable parts.

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

1. Spindle Lock

2. Hex Key Storage

3. Worklight

4. Bevel Locking Lever

5. Dust Port

6. Rear Handle

7. Lock-Off Button

8. Blade

9. Front Handle

10. Rip Fence Locking Knob

11. Cutting Guide Notch

12. Upper Blade Guard

13. Lower Blade Guard

14. Blade Bolt

15. On/Off Trigger

16. Blade Guard Lever

17. Depth locking Lever

18. Battery Seating

This tool is compatible with all batteries & chargers from the Ozito PXC range.

For optimal performance, we recommend the use of a 3.0Ah battery or higher to

operate this PXC tool.

CORDLESS CIRCULAR SAW

BATTERY & CHARGER

KNOW YOUR PRODUCT

1. FITTING THE BATTERY & GUIDE

SETUP & PREPARATION

65 7 98 10

111214161718 15 13

Installing & Removing The Battery Pack

1. Slide the battery into the tool

base until it clicks into place.

2. To remove the battery,

hold down the battery

release button and then

slide the battery out.

Attaching The Rip Fence

The rip fence allows you to perform straight cuts with ease.

WARNING! ENSURE THE TOOL IS SWITCHED

OFF AND THE BATTERY IS REMOVED BEFORE

PERFORMING ANY OF THE FOLLOWING TASKS.

1. Insert the rip fence through the

rip fence slots in the front of the

baseplate.

2. Once the desired width is set,

tighten the locking knob to

secure in place.

3. To remove, loosen the locking

knob and then slide the

rip fence out.

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Sav
Model:	PXCSS-165

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito PXCSS-165 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sav Ozito Manualer

Ozito PXBCS-1830 Manual

24 December 2024

Ozito TBS-254 Manual

8 Marts 2024

Ozito PXCPRSK-218U Manual

4 Marts 2024

Ozito OCS-018 Manual

3 Marts 2024

Ozito SCMS-1621MS Manual

25 Februar 2024

Ozito BSW-2581U Manual

13 Februar 2024

Ozito BSW-2581 Manual

27 Januar 2024

Ozito JSW-4000 Manual

25 December 2023

Ozito PCR-3100U Manual

3 December 2023

Ozito PLS-1214 Manual

23 November 2023

Sav Manualer

Nyeste Sav Manualer

Scheppach KS1200 Manual

1 August 2025

RYOBI CS-1835 Manual

31 Juli 2025

Guede KS 450-55 Manual

31 Juli 2025

RYOBI CS-4016 Manual

31 Juli 2025

RYOBI RRS1801M Manual

31 Juli 2025

Skil 3540 CA Manual

31 Juli 2025

RYOBI One+ RPLS18X Manual

31 Juli 2025

RYOBI One+ RMS18254X Manual

31 Juli 2025

RYOBI RTBS18X Manual

31 Juli 2025

RYOBI CS-2240 Manual

31 Juli 2025