PAC LocPro Advanced LPA-2.4 Manual

PAC Audio/video konverter LocPro Advanced LPA-2.4

Læs gratis den danske manual til PAC LocPro Advanced LPA-2.4 (3 sider) i kategorien Audio/video konverter. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 13 anmeldelser. Har du et spørgsmål om PAC LocPro Advanced LPA-2.4, eller vil du spørge andre brugere om produktet?

Side 1/3
12V
Connect to a fused
+12V constant source
GND
Connect to a good
chassis ground
REM IN
Remote turn on input (+)
REM OUT
Remote turn on output (+)
The LPA will provide a
+12V Remote Output using
DC Signal Sense from the
Right channel inputs
SPEAKER SIGNAL INPUTS
Connect to head unit or
RCA SIGNAL OUTPUTS
GROUND ISOLATION
Selectable: GND / ISO / 200
Default: ISO
If ground / engine noise is present,
the jumper can be repositioned
GAIN
Variable: -28dB -+1dB
Allows gain adjustment of
the output signal
LPF
Low Pass Filter
Allows 250Hz low pass
filter for Rear Channels
BOOST
Variable: 0dB — 12dB
When LPF is ON, provides
Bass Boost (45Hz) for
Rear Channels
CLIP
Indicates signal clipping when
gain is set to high
REMOTE
Optional Re ote Level Com n-
trol Knob (LPA-R r EM) for Rea
Chan eln s
LOAD SELECT
Selectable: 20Ω / 60Ω / 20kΩ
Default: 20kΩ
For factory audio systems
requiring a resistance load to
output audio, select 60Ω first,
then 20Ω. All others use 20kΩ
setting
LPA-2.2 | 2 Channel Line-Ou put Convt erter
LPA-2.4 | 4 Channel Line-Ou put Convt erter
Selectable Ground Isolation and Load Select features ensu e a pur re, noise-f ee signal for any type of audio systemr .
This Quick Start Guide will get you going, but if you need additional help or information, please visit our website or
contact Tec ical ppohn Su rt.
Features & Wiring Information
Quick Start Guide
Technical Support | Phone: 727-592-5991 | Email: support@aampglobal.com | Chat: PAC-Audio.com | ©2021
X
FULLY OPEN TERMINALS
BEFORE INSERTING WIRE
JUMPERS CAN BE
TRIMMED FLUSH
1 2 3 4 5 6 SET
SEEK SEEK AM/FM DISC AUX RW FF
Speaker level input from a radio to RCA level output for an aftermarket amplier is the most commonly used conguration for the
L.O.C.PRO ADVANCED. This will create RCA level outputs from a radio that only has speaker level outputs.
In the example below, the Positive(+) and Negative(-) wires of two speakers are “tapped” and connected to the SPEAKER SIGNAL
INPUTS of the LPA. The speakers will continue to play as normal. The REM OUT is connected to the ampliers turn-on. When the
radio is turned on the LPA will automatically turn on the amplier. Lastly, the RCA SIGNAL OUTPUTS from the LPA are connected
to the aftermarket ampliers inputs.
Example Installation
Model Number LPA-2.2 LPA-2.4
Channels 2 IN — 2 OUT 2 IN — 4 OUT
Operating Voltage 9V—16V 9V-16V
Max Input Level (20kH Load Setting)Ω40V / 400W @ 4 Ohms 40V / 400W @ 4 Ohms
Auto Turn On DC Offset / Remote DC Offset / Remote
Output Voltage MAX @ 13.8V 9.5V RMS 9.5V RMS
Turn On Trigger (DC-Offset) 3V—7V 3V—7V
Load Input Impedance 20Ω, 60Ω, 20KΩ 20Ω, 60Ω, 20KΩ
Output Impedance <120Ω <120Ω
Variable Gain Adjustment -28dB—+1dB -28dB—+1dB
Signal To Noise >110dBA @ 6.4V Output >110dBA @ 6.4V Output
THD+N < 0.01% < 0.01%
Input Sensitivity 0.5V—40V 0.5V—40V
Frequency Response 10Hz—20kHz 10Hz—20kHz
Current Draw (Max) 40mA 40mA
Low Pass Filter <250Hz <250Hz
Bass Boost 0dB to +12dB 0dB to +12dB
Clip Indicator YES YES
Remote Level Control OPTIONAL (PN: LPA-REM) OPTIONAL (PN: LPA-REM)
Chassis Type Stamped Steel Stamped Steel
Terminal Gauge 18AWG / Quick Connect 18AWG / Quick Connect
Specications
OEM RADIO
CHASSIS GROUND (-)
12V CONSTANT POWER (+)
REMOTE AMP TURN-ON
Technical Support | Phone: 727-592-5991 | Email: support@aampglobal.com | Chat: PAC-Audio.com | IM-LPA2X REV. 040821
For more installation examples, tech tips and updates,
visit the L.O.C.PRO ADVANCED product pages on
PAC-Audio.com


Produkt Specifikationer

Mærke: PAC
Kategori: Audio/video konverter
Model: LocPro Advanced LPA-2.4

Har du brug for hjælp?

Hvis du har brug for hjælp til PAC LocPro Advanced LPA-2.4 stil et spørgsmål nedenfor, og andre brugere vil svare dig