PAC LocPro Advanced LPA1.4 Manual

PAC Audio/video konverter LocPro Advanced LPA1.4

Læs gratis den danske manual til PAC LocPro Advanced LPA1.4 (8 sider) i kategorien Audio/video konverter. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om PAC LocPro Advanced LPA1.4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
© 2021 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
C
Rev.7
1/5/2022
LPH Harness Instruction Guide
®
Wiring Connection Chart (All Models)
MODELS:
• LPA-E4
• LPA2.4 / LPA2.2
• LPA1.4 / LPA1.2
Important Note: This harness is provided
with a inline fuse installed. Please remove
prior to install and reinsert once nished.
If your vehicle does not provide ACC
source your harness will not have a
"RED" wire to connect.
It will use DC O󰀨set to turn on as well
as trigger the "REM OUT" on the LPA.
On LPA-E4 there will be a jumper that
you can move based on your application.
This harness is designed to work on
OEM NON-AMPLIFIED systems.
Connect the RED BUTT Connector to
the aftermarket system turn on for your
ampliers.
Fully open terminals
before inserting wire.
© 2021 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
C
Rev.7
1/5/2022
LPH Harness Instruction Guide
®
Example Installation - 4-Channel Amplier - (HARNESS CUT REQUIRED)
Example Installation - Mono Amplier - (HARNESS CUT NOT REQUIRED)
RCA FROM LPA
"CUT HERE
AND INSULATE"
• Cut the harness close as possible to the
"CUT HERE AND INSULATE" label. You
must insulate wires to prevent damage to
OEM radio.
• The cut speaker wires will need to be
connected to your aftermarket amplier.
(REFER TO LABEL ON HARNESS)
• Please refer to the chart on the rst page
for wiring your loose wires to your LPA.
• This harness is designed to work on OEM
NON-AMPLIFIED systems.
OEM RADIO HARNESS
LPH TO RADIO CONNECTION
LOOSE WIRES TO LPA
REM OUT FROM LPA
DO NOT CUT!!
• If using a 2-Channel input LPA
use the front speaker wires
and insulate the remaining rear
speaker wires.
• DO NOT CUT the speaker wires
inbetween the "CUT HERE"
Lables in order to keep the
factory speakers functional.
• This harness is designed to
work on OEM NON-AMPLIFIED
systems.
OEM RADIO HARNESS
LOOSE WIRES TO LPA
"CUT HERE AND
INSULATE"
"CUT HERE AND CONNECT TO
AFTERMARKET AMPLIFIER"
LPH TO RADIO CONNECTION
RCA FROM LPA
REM OUT FROM LPA
AFTERMARKET AMPLIFIER
AFTERMARKET AMPLIFIER
"CUT HERE AND CONNECT TO
AFTERMARKET AMPLIFIER"
(CUT SPEAKER WIRES)

Produkt Specifikationer

Mærke: PAC
Kategori: Audio/video konverter
Model: LocPro Advanced LPA1.4

Har du brug for hjælp?

Hvis du har brug for hjælp til PAC LocPro Advanced LPA1.4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Audio/video konverter PAC Manualer

PAC

PAC LocPro Advanced LPA-2.2 Manual

14 August 2024
PAC

PAC LocPro Advanced LPA1.2 Manual

8 August 2024
PAC

PAC LocPro Advanced LPA-E.4 Manual

8 August 2024
PAC

PAC LocPro Advanced LPA1.4 Manual

7 August 2024
PAC

PAC LocPro Advanced LPA-2.4 Manual

6 August 2024

Audio/video konverter Manualer

Nyeste Audio/video konverter Manualer

Sescom

Sescom SES-X-FA2LRT01 Manual

8 Juni 2025
AVUE

AVUE SDH-R01 Manual

7 Juni 2025
Orei

Orei EX-170C Manual

7 Juni 2025
AVUE

AVUE SDH-T01 Manual

7 Juni 2025
AVUE

AVUE HDMI-A011 Manual

7 Juni 2025
EXSYS

EXSYS EX-60340 Manual

1 Juni 2025
EXSYS

EXSYS EX-1320-3 Manual

1 Juni 2025
EXSYS

EXSYS EX-1323 Manual

31 Maj 2025
TV One

TV One 1T-EDID-11 Manual

7 April 2025
Mean Well

Mean Well PSD-15B-24 Manual

25 Marts 2025