Panasonic DMC-ZS40 Manual
Panasonic
Digital kamera
DMC-ZS40
Læs nedenfor 📖 manual på dansk for Panasonic DMC-ZS40 (47 sider) i kategorien Digital kamera. Denne guide var nyttig for 22 personer og blev bedømt med 5.0 stjerner i gennemsnit af 11.5 brugere
Side 1/47
VQT5E54
M1213KZ0
Basic Owner’s Manual
Digital Camera
Model No. DMC-ZS40
Please read these instructions carefully before using this product, and
save this manual for future use.
More detailed instructions on the operation of this camera
are contained in “Owner’s Manual for advanced features
(PDF format)” in the supplied CD-ROM. Install it on your PC
to read it.
Register online at www.panasonic.com/register (U.S. customers only)
P
If you have any questions, visit:
USA and Puerto Rico: www.panasonic.com/support
2 VQT5E54 (ENG)
Dear Customer,
Thank you for choosing Panasonic!
You have purchased one of the most sophisticated and reliable
products on the market today. Used properly, we’re sure it will bring
you and your family years of enjoyment. Please take time to fill in
the information below. The serial number is on the tag located on the
underside of your camera. Be sure to retain this manual as your
convenient camera information source.
Date of Purchase Dealer Phone No.
Dealer Purchased From Model No.
Dealer Address Serial No.
Please note that the actual controls and components, menu items, etc.
of your Digital Camera may look somewhat different from those shown
in the illustrations in this Owner’s Manual.
Carefully observe copyright laws.
• Recording of pre-recorded tapes or discs or other published or broadcast
material for purposes other than your own private use may infringe copyright
laws. Even for the purpose of private use, recording of certain material may
be restricted.
A lithium ion battery that is recyclable powers
the product you have purchased. Please call
1-800-8-BATTERY for information on how to recycle
this battery.
(ENG) VQT5E54 3
Information for Your Safety
The socket outlet shall be installed near the equipment and shall be
easily accessible.
■Product identification marking
Product Location
Digital camera Bottom
WARNING:
To reduce the risk of fire, electric shock or product damage,
•Do not expose this unit to rain, moisture, dripping or
splashing.
•Use only the recommended accessories.
•Do not remove covers.
•Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
■About the AC adaptor (supplied)
CAUTION!
To reduce the risk of fire, electric shock or product damage,
•Do not install or place this unit in a bookcase, built-in cabinet or in
another confined space. Ensure this unit is well ventilated.
AC adaptor
This AC adaptor operates on AC between 110V and 240V.
But
• In the U.S.A. and Canada, the AC adaptor must be connected to
a 120V AC power supply only.
• When connecting to an AC supply outside of the U.S.A. or
Canada, use a plug adaptor to suit the AC outlet configuration.
4 VQT5E54 (ENG)
■About the battery pack
CAUTION
Battery pack (Lithium ion battery pack)
• Use the specified unit to recharge the battery pack.
• Do not use the battery pack with equipment other than the specified unit.
• Do not get dirt, sand, liquids, or other foreign matter on the terminals.
• Do not touch the plug terminals (+ and −) with metal objects.
• Do not disassemble, remodel, heat or throw into fire.
If any electrolyte should come into contact with your hands or
clothes, wash it off thoroughly with water.
If any electrolyte should come into contact with your eyes, never
rub the eyes. Rinse eyes thoroughly with water, and then consult a
doctor.
CAUTION
• Danger of explosion if battery is incorrectly replaced. Replace
only with the type recommended by the manufacturer.
• When disposing of the batteries, please contact your local
authorities or dealer and ask for the correct method of disposal.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in a car exposed to direct sunlight for a
long period of time with doors and windows closed.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above
60 °C (140 °F) or incinerate.
DMC-ZS40
(ENG) VQT5E54 5
FCC Note:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached
installation instructions and use only shielded interface cables with
ferrite core when connecting to computer or peripheral devices.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
this equipment.
Declaration of Conformity
Trade Name: Panasonic
Model No.: DMC-ZS40
Responsible Party: Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
Support Contact: http://www.panasonic.com/contactinfo
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
6 VQT5E54 (ENG)
■Cautions for Use
• Do not use any other USB connection cables except the supplied one or a
genuine Panasonic USB connection cable (DMW-USBC1: optional).
• Always use a genuine Panasonic AV cable (DMW-AVC1: optional).
• Use a “High Speed HDMI micro cable” with the HDMI logo. Cables that do not
comply with the HDMI standards will not work.
“High Speed HDMI micro cable” (Type D-Type A plug, up to 2 m (6.6 feet)
long)
Keep this unit as far away as possible from electromagnetic equipment
(such as microwave ovens, TVs, video games etc.).
• If you use this unit on top of or near a TV, the pictures and/or sound on this
unit may be disrupted by electromagnetic wave radiation.
• Do not use this unit near cell phones because doing so may result in noise
adversely affecting the pictures and/or sound.
• Recorded data may be damaged, or pictures may be distorted, by strong
magnetic fields created by speakers or large motors.
• Electromagnetic wave radiation may adversely affect this unit, disturbing the
pictures and/or sound.
• If this unit is adversely affected by electromagnetic equipment and stops
functioning properly, turn this unit off and remove the battery or disconnect AC
adaptor (supplied). Then reinsert the battery or reconnect AC adaptor and turn
this unit on.
Do not use this unit near radio transmitters or high-voltage lines.
• If you record near radio transmitters or high-voltage lines, the recorded
pictures and/or sound may be adversely affected.
(ENG) VQT5E54 7
Certification and Compliance
See Camera for the certification and compliance mark specific to
that device.
1 Select [Wi-Fi Setup] in the [Wi-Fi] menu
2 Press to select [Approved Regulations], and press
[MENU/SET]
Contains FCC ID : VPYLBXN604
This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment and meets the FCC radio
frequency (RF) Exposure Guidelines in Supplement C to OET65.
This equipment has very low levels of RF energy that are deemed
to comply without testing of specific absorption ratio (SAR).
8 VQT5E54 (ENG)
Contents
Information for Your Safety .... 3
Before use ................................ 9
Standard accessories ........... 10
Names and Functions of
Main Parts .............................. 11
Inserting and removing the
battery or SD memory card
(optional) ................................ 14
Charging the battery ............. 15
Setting the clock .................... 17
Setting the menu ................... 19
Taking pictures with
automatic settings
[Intelligent Auto] Mode .......... 20
Recording motion pictures ... 23
Using the control ring/
control dial ............................. 25
Registering preferred
functions to the
[Fn] button .............................. 27
Taking pictures with the
composition determined
[Composition Guide] ............. 27
Viewing your pictures ........... 28
Deleting pictures ................... 28
What you can do with the
Wi-Fi® function ....................... 29
GPS functions ........................ 31
Reading the Owner’s Manual
(PDF format) ........................... 32
Supplied software .................. 33
Copying still pictures and
motion pictures ...................... 34
Troubleshooting .................... 35
Specifications ........................ 37
Digital Camera Accessory
System .................................... 40
Digital Camera Accessory
Order Form ............................. 41
Limited Warranty
(ONLY FOR U.S.A. AND
PUERTO RICO) ...................... 42
(ENG) VQT5E54 9
Before use
■Camera handling
●Keep the camera away from excessive vibration, force, or pressure.
●The camera is not dust resistant, splash resistant, or waterproof.
Avoid using the camera in places with excessive dust or sand, or where
water can come into contact with the camera.
●Do not allow camera to come into contact with pesticides or volatile
substances (can cause surface damage or coating to peel).
■
Condensation (When the lens, the LCD monitor or the viewfinder is fogged up)
●
Condensation may occur when the camera is exposed to sudden changes of
temperature or humidity. Avoid these conditions, which may make the lens,
the LCD monitor or the viewfinder dirty, cause mold, or damage the camera.
●If condensation does occur, turn off the camera and wait about two hours
before using it. Once the camera adjusts to the surrounding temperature,
the fogging will clear naturally.
■Caring for your camera
●Before cleaning the camera, remove the battery or disconnect the power
plug from the outlet.
●Do not press the LCD monitor with excessive force.
●Do not press the lens with excessive force.
●Do not keep rubber or plastic products in contact with the camera for a long
period of time.
●Do not use solvents such as benzine, thinner, alcohol, kitchen detergents,
etc., to clean the camera, since it may deteriorate the external case or the
coating may peel off.
●Do not leave the camera with the lens facing the sun, as rays of light from
the sun may cause it to malfunction.
●Do not extend the supplied cord or cable.
●While the camera is accessing the card or built-in memory (for an operation
such as picture writing, reading, deleting, or formatting), do not turn off the
camera or remove the battery, card, AC adaptor (supplied).
●The data on the built-in memory or the card may be damaged or lost due to
electromagnetic waves, static electricity or breakdown of the camera or the
card. We recommend storing important data on a PC etc.
●Do not format the card on your PC or other equipment. Format it on the
camera only to ensure proper operation.
10 VQT5E54 (ENG)
Standard accessories
Check that all the accessories are supplied before using the camera. Part
numbers are as of January 2014. These may be subject to change.
Battery pack
DMW-BCM13PP
• Charge the battery
before use.
Battery pack is indicated as
battery pack or battery in the text.
AC adaptor
VSK0768
Hand strap
VFC4297
USB connection cable
K1HY08YY0031
CD-ROM
VFF1254
• Software:
Use it to install the software on
your PC.
• Owner’s Manual for advanced
features
• SD Memory Card, SDHC Memory Card and SDXC Memory Card are
indicated as card in the text.
• Cards are optional. You can record or play back pictures on the built-in
memory when you are not using a card.
•Compatible memory cards (optional)
The following SD standard-based cards (Panasonic brand recommended) can
be used.
SD Memory Card (8 MB to 2 GB) / SDHC Memory Card (4 GB to 32 GB) /
SDXC Memory Card (48 GB, 64 GB)
• For information about optional accessories, refer to the “Digital Camera
Accessory System”.
• If accessories are lost, customers can visit us at www.panasonic.com/support
for further information about obtaining replacement parts.
• Please dispose of all packaging appropriately.
• Keep small parts in a safe place out of the reach of children.
• The illustrations and screens in this manual may differ from the actual product.
• SILKYPIX Developer Studio SE is not provided on the supplied CD-ROM.
Download this software from the website and install it on your computer to
use. (→34)
(ENG) VQT5E54 11
Names and Functions of Main Parts
123 4 5678 11
12
13
910
11
26
24 25
28
34
30
33
31
27
(Top)
15 16 17 19
(Bottom)
21 22 23
14 2018
32
29
12 VQT5E54 (ENG)
Names and Functions of Main Parts
1 Flash
2 Self-timer indicator/
AF Assist Lamp
3 Control ring
4 Lens barrel
5 Lens
• Do not touch the lens barrier.
6 Viewfinder (LVF)
7 Diopter adjustment dial
• Adjusts the focus in the viewfinder.
8 [LVF] button
• Use this to switch display between
viewfinder and LCD monitor.
9 LCD Monitor
10 Charging lamp (Red)/
Wi-Fi® connection lamp (Blue)/
GPS status indicator (Green)
• The color of the lamp differs
depending on the function.
11 Strap eyelet
• We recommend using the supplied
hand strap to avoid dropping the
camera.
12 [HDMI] socket
• Do not connect any other cables
except the HDMI micro cable. Doing
so may cause malfunction.
13 [AV OUT/DIGITAL] socket
• This socket is also used when
charging the battery.
14 Speaker
15 Microphones
16 Mode dial
• Use this to select the recording mode.
17 Shutter button
18 Zoom lever
19 Motion picture button
20 Camera [ON/OFF] button
21 Tripod mount
• Do not attach to a tripod with a
5.5 mm (0.22 inch) or longer screw.
Doing so may damage this unit.
• If you are not holding the camera,
for example when using self-timer
recording or remote recording, the
camera could tilt when the lens barrel
extends during zooming, so make
sure to secure the camera in place
with a tripod or by other means.
• It may not be possible to attach
certain types of tripods properly.
22 Card/Battery door
23 Release lever
24 [Wi-Fi] antenna
25 GPS antenna
26 NFC antenna
27 [Wi-Fi] button
28 Playback button
• Use this to select the recording mode
or playback mode.
29 [MENU/SET] button
30 [Q.MENU/ ] / [ ] button
• You can display the Quick Menu and
erase pictures.
31 [DISP.] button
• Use this to change display.
32 Control dial
• Turn the dial to select setting items
and change setting values.
33 [Fn] button
34 Cursor button
(ENG) VQT5E54 13
[MENU/SET] button / Cursor button
[MENU/SET] button
• Use this button to display the menus, enter the settings, etc.
Cursor button
• This button is used to move the cursor on the menu screens and for
other functions.
• In this manual, the button that is to be used is indicated by .
You can perform the following operations while recording.
[ ] button ( )
• Exposure Compensation
- Corrects the exposure when there is a backlight or when the subject is too dark or too
bright.
[ ] button ( )
• Flash
[ ] button ( )
• Burst∗
- A burst of still pictures can be recorded while the shutter button is pressed fully.
• Auto Bracket∗
- Records 3 pictures in continuous succession while exposure is changed automatically.
After exposure adjustment, the adjustment value is set as the standard.
• Self-timer∗
- This is effective for preventing jitter when pressing the shutter button, by setting the self-
timer to 2 seconds.
∗ To cancel the setting, select [ ] or [ ].
[ ] button ( )
• Macro recording
- When you want to enlarge the subject, setting to [AF Macro] ([ ]) enables you to take
pictures at an even closer distance than the normal focus range (up to 3 cm (0.098 feet)
for max. Wide).
• Manual Focus
- Manual Focus is convenient when you want to lock the focus to take pictures or when it is
difficult to adjust focus using Auto Focus.
14 VQT5E54 (ENG)
Inserting and removing the battery or
SD memory card (optional)
Make sure that the camera is turned off.
Slide the release lever ( ) to the
[OPEN] position and open the card/
battery door
Insert the battery and card, making sure
that their orientation is correct
• Battery: Insert the battery all the way firmly and
check that it is locked by lever ( ).
• Card: Insert the card all the way firmly until it
clicks. Do not touch the terminals on the
back of the card.
Close the door
Slide the release lever to the [LOCK] position.
■To remove
•To remove battery:
Move lever in direction of
arrow.
Lever
•To remove card:
Push the card until it clicks, then pull
the card out.
Press Pull out
●Always use genuine Panasonic batteries (DMW-BCM13PP).
●If you use other batteries, we cannot guarantee the quality of this product.
●Keep the Memory Card out of reach of children to prevent swallowing.
●We recommend using a Panasonic card.
(ENG) VQT5E54 15
Charging the battery
•The battery that can be used with this unit is DMW-BCM13PP.
•The battery is not charged when the camera is shipped. Charge the
battery before use.
Make sure that the camera is turned off.
Insert the battery to this unit, and then connect this unit to
the AC adaptor (supplied) ( ) or a PC ( )
When charging the camera, connect the USB connection cable
(supplied) to the [AV OUT/DIGITAL] socket (gold terminal).
Connecting the cable to a wrong terminal may cause malfunction.
[AV OUT/DIGITAL] socket
• Place the camera in an upright position, and
find the gold terminal at the bottom.
• Insert the USB connection cable so that its [ ] mark will face the [ ]
mark side of the camera.
• Always check the direction of the pins and hold the plug straight to insert
or remove it. (If the cable is inserted in the wrong direction, the pins could
become deformed and cause faulty operation.) Also, do not insert into the
wrong socket. Doing so may cause damage to this unit.
Computer
Getting ready:
Turn on the computer.
To the electrical outlet
USB connection cable
(supplied)
16 VQT5E54 (ENG)
Charging the battery
■Charging lamp (Red)
On: Charging in progress
Off: Charging stops
(After charging stops, disconnect the camera
from the electrical outlet or your computer.)
Flashing: Charging error
(For instructions on correcting the problem,
refer to “Troubleshooting” (→35).)
■Notes on charging time
When using the AC adaptor (supplied)
Charging time Approx. 170 min
●The battery is a rechargeable lithium ion battery. If the temperature is too high
or too low, the operating time of the battery will become shorter.
●The battery becomes warm after using and during and after charging. The
camera also becomes warm during use. This is not a malfunction.
●Do not peel off or scratch the covering on the battery.
●Do not leave any metal items (such as clips) near the contact areas of
the power plug or near the batteries.
●Store the battery in a cool and dry place with a relatively stable temperature:
(Recommended temperature: 15 °C to 25 °C (59 °F to 77 °F), Recommended
humidity: 40%RH to 60%RH)
●Do not store the battery for a long time while fully charged. When storing
the battery for a long period of time, we recommend charging it once a year.
Remove the battery from the camera and store it again after it has completely
discharged.
●If you try to recharge the battery when it is already fully charged, the charging
lamp will light for approximately 15 seconds.
When using the AC adaptor (supplied), observe the following points as improper
connections may cause malfunctions.
●Do not use any other USB connection cables except the supplied one or a
genuine Panasonic USB connection cable (DMW-USBC1: optional).
●Do not use any other AC adaptors except the supplied one.
●Do not use the AC adaptor (supplied) or the USB connection cable (supplied)
with other devices.
(ENG) VQT5E54 17
Setting the clock
The clock is not set when the camera is shipped.
Disconnect the unit from the AC adaptor (supplied).
Press the Camera [ON/OFF] button ( )
Press [MENU/SET] ( )
Press to select the items (year, month,
day, hour, minute, display order or time
display format), and press to set
• To cancel → Press [Q.MENU/ ] button.
Press [MENU/SET] to set
Confirm the setting and press [MENU/SET]
• To return to the previous screen, press [Q.MENU/ ] button.
Press to select [Yes] and press [MENU/SET] if automatically
correcting time of day using the GPS function
• [GPS Setting] is set to [ON]
• To manually set date and time → select [No], and press [MENU/SET].
When [Please set the home area] is displayed, press
[MENU/SET]
(Continued on the next page)
18 VQT5E54 (ENG)
Setting the clock
Press to set your home area and press [MENU/SET]
City or area name Current time
Difference from GMT
(Greenwich Mean Time)
• If the time zone of your current location is different from that of [Home],
[World Time] is set to [Destination]. ([ ] will be displayed next to the
time and date on the screen)
■Changing time settings
Select [Clock Set] from [Setup] menu, perform and .
Please see the next page on how to set the menu.
(ENG) VQT5E54 19
Setting the menu
Refer to the following procedures to operate the menus.
Example: Setting [AF Mode] from [ ] to [ ] in the [Program AE] Mode
Press [MENU/SET] to display the menu
Press or turn the control dial
to select the [Rec] menu, and press
[MENU/SET]
Press or turn the control dial to
select [AF Mode], and press
[MENU/SET]
• Depending on the item, its setting may not
appear or it may be displayed in a different
way.
Press or turn the control dial to
select [ ], and press [MENU/SET]
Press [Q.MENU/ ] button several
times to close the menu
• In recording mode, the menu screen can
also be exited by pressing the shutter button
halfway.
■Menu types
• [Rec]
• [Setup]
• [Playback]
• [Motion Picture]
• [Wi-Fi]
• [GPS]
• [Playback Mode]
20 VQT5E54 (ENG)
Taking pictures with automatic settings
[Intelligent Auto] Mode
This mode is recommended for those who want to point and shoot or
beginners as the camera optimizes settings to match the subject and recording
environment.
Set mode dial to [ ] ([Intelligent Auto] Mode)
Align the mode dial correctly to
the mode that you want to use.
Take a picture
Press halfway
(press lightly to focus)
Press fully
(press the button all the
way to record)
■Automatic Scene Detection
Camera reads scene when pointed at subject, and makes optimum settings
automatically.
[i-Portrait] [i-Night Portrait]
(Only when [ ] is selected)
[i-Baby]
[i-Scenery] [i-Night Scenery]
[i-Sunset] [i-Handheld Night Shot]
[i-Macro] [i-Food]
When scene does not correspond to any of the above
(ENG) VQT5E54 21
■Recording modes
[Intelligent Auto] Mode
Take pictures with automatic settings.
You can switch to the [Intelligent Auto Plus] Mode on the menu to adjust the
brightness and color settings to your liking.
[Program AE] Mode
Take pictures with automatic shutter speed and aperture value settings.
[Aperture-Priority] Mode
Determine aperture, then record pictures.
[Shutter-Priority] Mode
Determine shutter speed, then record pictures.
[Manual Exposure] Mode
Determine aperture and shutter speed, then record pictures.
[Custom] Mode
Record pictures using pre-registered settings.
[Panorama Shot] Mode
Record panorama pictures.
[Scene Mode]
This allows you to take pictures that match the scene being recorded.
[Creative Control] Mode
Take pictures by selecting your preferred picture effect.
■ Holding the camera
Do not block the flash or the lamp.
Do not look at it from close range.
Hand strap
AF Assist LampFlash
●To avoid camera shake, hold it with both hands keeping your arms close to
your body while standing with your feet slightly apart.
●Do not touch the lens.
22 VQT5E54 (ENG)
Taking pictures with automatic settings [Intelligent Auto] Mode
■Zoom types
You can adjust the area of a picture to be taken using zoom.
Capture a wider area
(wide-angle)
Enlarge the subject
(telephoto)
• Optical Zoom
Zooming in up to 30x is possible if pictures without [ ] have been selected
by [Picture Size] on the [Rec] menu.
• Extended optical zoom
Zooming in up to 71.7x is possible when pictures with [ ] have been
selected by [Picture Size] on the [Rec] menu.
• [i.Zoom]
Increase the zoom ratio up to 2x higher than the original zoom ratio with
limited deterioration of picture quality. Set the [i.Zoom] in the [Rec] menu to
[ON].
• [Digital Zoom]
Zoom 4x further than Optical/Extended optical zoom. Note that, with Digital
Zoom, enlarging will decrease picture quality. Set the [Digital Zoom] in the
[Rec] menu to [ON].
• [Step Zoom]
Each time the control ring/control dial is operated, the zoom stops at the
position for one of the preset focal lengths.
■Menu convenient for taking pictures
• [Picture Size]
Recording capacity guidelines (still pictures)
Save location 18M 5M 0.3M
Built-in Memory 1 3 69
Card (2 GB) 270 650 10050
(When [Aspect Ratio] is set to [ ] and [Quality] is set to [ ])
(ENG) VQT5E54 23
Recording motion pictures
You can record motion pictures with audio (stereo).
• You can record motion pictures fitting each Recording Mode.
• Motion pictures cannot be recorded in the built-in memory.
Press the motion picture button ( ) to
start recording
●Do not block the microphones ( ) when recording
motion pictures.
●You can also use zoom while recording motion
pictures.
• The zoom speed will be slower than normal.
• The operating sounds of the zoom lever or
control ring/control dial may be recorded in
some cases.
●Still pictures can be taken during motion picture
recording.
Press the motion picture button ( ) again to end recording
●About recording time
• You can continuously record a motion picture in [MP4] for up to 29 minutes
59 seconds or approx. 4 GB. (Since recording in [MP4] with [FHD/30p]
creates larger files, the recording time for such motion pictures will be
shorter than 29 minutes 59 seconds.)
• If [Rec Quality] of [AVCHD] motion pictures is set to [FHD], you can
continuously record a motion picture for up to 29 minutes 59 seconds.
●Motion pictures cannot be recorded in the following cases.
• [Panorama Shot] Mode
• [3D Photo Mode] ([Scene Mode])
• [Soft Focus]/[Star Filter] ([Creative Control] Mode)
24 VQT5E54 (ENG)
Recording motion pictures
■About the recording format for recording motion pictures
This unit can record motion pictures in either AVCHD or MP4 formats.
The recording format for motion pictures can be changed in [Rec Format] of
the [Motion Picture] menu.
■About the recording quality setting
The recording quality for motion pictures can be changed in [Rec Quality] of
the [Motion Picture] menu.
[AVCHD] in [Rec Format] ∗ AVCHD Progressive
Item Picture size fps Bit rate
[FHD/60p]/ ∗
1920×1080 60p Approx. 28 Mbps
[FHD/60p]∗
[FHD/60i]/ 1920×1080 60i Approx. 17 Mbps
[FHD/60i]
[HD/60p]/ 1280×720 60p Approx. 17 Mbps
[HD/60p]
• Select picture quality settings with the [ ] to record location information
and place name information.
[MP4] in [Rec Format]
Item Picture size fps Bit rate
[FHD/30p] 1920×1080 30p Approx. 20 Mbps
[HD/30p] 1280×720 30p Approx. 10 Mbps
[VGA/30p] 640×480 30p Approx. 4 Mbps
■About motion picture icon
60i
[Rec Format]
Picture size
Location information/Place name log
fps
●If the surrounding temperature is high, or a motion picture is recorded
continuously, [ ] is displayed and recording may be stopped halfway
through to protect the camera.
●
If Extended optical zoom is used before pressing the motion picture button, these
settings will be cleared, and the recordable area will be changed significantly.
(ENG) VQT5E54 25
Using the control ring/control dial
You can use the control ring/control dial to perform frequently used operations
and settings directly.
Control ring
Control dial
Items that can be set by the control ring/control dial vary depending on recording
modes. Following are the pre-assigned settings.
Recording mode Setting
Control ring∗1Control dial
Step Zoom (→22)
Program Shift
Aperture adjustment
Shutter speed adjustment
Aperture adjustment Shutter speed adjustment∗2
Picture effects change
Scene change
Picture effects change
∗1 When Manual Focus is set, the control ring is assigned to focus adjustment.
∗2 Press to switch between aperture adjustment and shutter speed adjustment.
26 VQT5E54 (ENG)
Using the control ring/control dial
■To change the settings assigned to the control ring/control dial
Changes the settings assigned to the control ring/control dial.
Press [MENU/SET]
Press to select [Setup] menu and press [MENU/SET]
Press to select [Ring/Dial Set] and press [MENU/SET]
Press to select [ ] (control ring) or [ ] (control dial), and then press
[MENU/SET]
Press to select the setting and press [MENU/SET]
The following settings can be assigned
• [Default Control] • [Zoom] • [Step Zoom]
• [Exposure Comp.] • [Aspect Ratio] • [Sensitivity]
• [White Balance] • [Not Set] (control ring only)
Press [Q.MENU/ ] button several times
●The assigned function setting applies to all the Recording Modes. However,
the assigned function may not operate when combined with certain
Recording Mode.
■Using Quick menu
During recording, you can easily call some of the menu items and set them.
Press [Q.MENU/ ] button
Press to select menu items
• The menu items and setting items that are displayed differ depending on
the recording mode.
Turn the control ring or control dial to change the setting
Press [MENU/SET]
(ENG) VQT5E54 27
Registering preferred functions to the [Fn] button
Taking pictures with the composition determined
[Composition Guide]
It is set to [Composition Guide] at the time of purchase.
Press [MENU/SET]
Press to select [Setup] menu and press [MENU/SET]
Press to select [Fn Button Set] and press [MENU/SET]
Press to select the function to register and press
[MENU/SET]
Press [Fn] button
• If the setting of the [Fn] button has been changed, select [Composition
Guide] in the [Setup] menu and press [MENU/SET].
Press to select the guideline to display and press
[MENU/SET]
• Explanations and examples of the composition will be displayed in turn
when you press the [DISP.] button.
■Guidelines (Examples)
[Rule of Thirds Offset] [Diagonal lines] [Radiation]
28 VQT5E54 (ENG)
Viewing your pictures
Press the Playback button ( )
• By holding down the Playback button while
the camera is off, you can turn the camera
on in Playback Mode.
Press or turn the control dial to select the picture to be
displayed
Folder/File number Picture number/
Total pictures
Location name information
and latitude & longitude
information are provided
• To play back a motion picture, select a picture with the motion picture
icon, and press .
Deleting pictures
Deleted pictures cannot be recovered.
Press [ ] button ( ) to delete the
displayed picture
Press to select [Yes] and then
press [MENU/SET] ( )
(ENG) VQT5E54 29
What you can do with the Wi-Fi® function
■Using a smartphone/tablet as a camera remote control
By installing the “Panasonic Image App” on your smartphone/tablet, you can
operate the camera remotely and use the smartphone/tablet to record and
play back. In addition, you can copy pictures in the camera to the smartphone/
tablet.
• For information on installing “Panasonic Image App” and basic operations
on the smartphone/tablet, refer to “Wi-Fi® Quick Guide”.
■Sending pictures to Wi-Fi compatible equipment
You can select pictures on your camera and transfer them to a TV, printer, AV
equipment, PC, etc.
■Transferring pictures automatically [Smart Transfer]
During battery charging, recorded pictures are transferred automatically to
PC, AV equipment and cloud folders.
30 VQT5E54 (ENG)
What you can do with the Wi-Fi® function
■Using WEB services
Through LUMIX CLUB, you can send still pictures and motion pictures to
social networking services, etc. To upload recorded pictures to a social
networking service right away, we recommend that you first send the pictures
to your smartphone/tablet and then upload them from your smartphone/tablet.
Wireless access point
LUMIX CLUB
WEB services
Cloud synchronization
services
■LUMIX CLUB
If you register this unit to the “LUMIX CLUB”, you can synchronize images
between the devices you are using, or transfer these images to WEB
services.
For details, refer to the “LUMIX CLUB” site.
http://lumixclub.panasonic.net/eng/c/
Please refer to “Owner’s Manual for advanced features (PDF
format)” for details.
• When sending images on a mobile network, high packet communication fees
may be incurred depending on the details of your contract.
• The camera uses WPA and WPA2 security.
●Hereafter, this manual uses the term “smartphone” for both smartphones and
tablets unless it is particularly distinguishing between them.
(ENG) VQT5E54 31
GPS functions
Before using the camera, be sure to read “User License Agreement for
Location Name Data” (Owner’s Manual for advanced features).
This camera can record the location information of a place where a picture was
taken on the pictures. The camera can also automatically adjust the time.
Using the GPS function to execute positioning
Press [MENU/SET]
Press to select [GPS] menu and press [MENU/SET]
Press to select [GPS Setting] and press [MENU/SET]
Press to select [ON] and press [MENU/SET]
• A message appears on the screen. After confirming the message, press
[MENU/SET].
■About the GPS function
• Information measured with this unit is simply a rough estimate. Please do
not use for professional applications.
• Positioning can be executed faster using GPS assist data.
■When [GPS Setting] is [ON], the GPS function works even if the camera
is turned off.
• Electromagnetic waves from the camera can affect instruments and meters.
During takeoff and landing of airplanes or in other restricted areas, set
[Airplane Mode] to [ON] and turn off the camera.
• When [GPS Setting] is [ON] and [Airplane Mode] is [OFF], power will drain
from the battery even if the camera is turned OFF.
■When using in another country
• The GPS function may not work in China or in the border regions of
countries neighboring China. (Current as of January 2014)
•
Some countries or regions may regulate the use of GPS or related technology.
32 VQT5E54 (ENG)
Reading the Owner’s Manual (PDF format)
More detailed instructions on the operation of this camera are contained in
“Owner’s Manual for advanced features (PDF format)” in the supplied CD-ROM.
Install it on your PC to read it.
■For Windows
Turn the PC on and insert the CD-ROM containing the
Owner’s Manual (supplied)
Click the [Owner’s Manual]
Select the desired language and
then click [Owner’s Manual] to
install
To return to the install menu.
Double-click the “Owner’s Manual”
shortcut icon on the desktop
■When the Owner’s Manual (PDF format) will not open
You will need Adobe Acrobat Reader 5.0 or later, or Adobe Reader 7.0 or later
to browse or print the Owner’s Manual (PDF format).
• You can download and install a version of Adobe Reader that you can use
with your OS from the following website.
http://get.adobe.com/reader/otherversions/
■For Mac
Turn the PC on and insert the CD-ROM containing the Owner’s Manual
(supplied)
Open the “Manual” folder in the CD-ROM and then copy the PDF file with
the desired language inside the folder
Double click the PDF file to open it
(ENG) VQT5E54 33
Supplied software
The supplied CD-ROM contains the following software.
Install the software on your computer to use.
For details about operating environment and usage, please read “Owner’s
Manual for advanced features” (PDF format) or the manuals for each software.
• PHOTOfunSTUDIO / LoiLoScope are not compatible with Mac.
PHOTOfunSTUDIO
9.3 PE
Pictures can be captured to a PC, and can be viewed, organized,
printed, etc. Also, still pictures can be corrected and motion
pictures can be edited.
• Compatible OS: Windows 8.1 / 8 / 7 / Vista / XP
LoiLoScope (30-day
full-trial version)
You can edit motion pictures easily. This will only install a shortcut
to the trial version download site.
For details about using LoiLoScope, please download and see the
manual from the following site.
http://loilo.tv/product/20/
• Compatible OS: Windows 8.1 / 8 / 7 / Vista / XP
Installing supplied software
Preparations:
• Check your PC’s specifications and operating environment for each software.
• Before inserting the CD-ROM (supplied), close all running applications.
■For Windows
Insert the supplied CD-ROM with the supplied software
When the install menu appears, click [Applications]
Click [Recommended Installation]
• Continue the installation procedure following the instructions displayed on
the screen.
●The software compatible with your PC will be installed.
34 VQT5E54 (ENG)
Supplied software
Downloading SILKYPIX Developer Studio SE
This software develops and edits RAW file pictures. Edited pictures can be
saved in a file format such as JPEG or TIFF that can be displayed on a PC, etc.
Download SILKYPIX Developer Studio SE from the following site and install it on
your computer to use. (This software is not provided on the supplied CD-ROM.)
http://www.isl.co.jp/SILKYPIX/english/p/
• Compatible OS: Windows 8.1 / 8 / 7 / Vista / XP
Mac OS X (10.5 - 10.9)
• For details on how to use the SILKYPIX Developer Studio SE, refer to the
“Help” or the Ichikawa Soft Laboratory’s support website.
●To download the software, the PC must be connected to the Internet.
●It may take time to download the software in some communication
environments.
Copying still pictures and motion pictures
Turn on the camera and the PC, and connect them using the
USB connection cable (supplied)
• Do not use any other USB connection cables except the supplied one or
a genuine Panasonic USB connection cable (DMW-USBC1: optional).
Using cables other than the above may cause a malfunction.
Press on the camera to select [PC], and press [MENU/SET]
Copy pictures to your computer
●For Windows
Use “PHOTOfunSTUDIO”.
●For Mac
Copy the picture files contained in the “DCIM” folder (except for AVCHD
motion pictures).
Cancel the connection and disconnect the USB connection
cable
Produkt Specifikationer
| Mærke: | Panasonic |
| Kategori: | Digital kamera |
| Model: | DMC-ZS40 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Panasonic DMC-ZS40 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Digital kamera Panasonic Manualer
15 Januar 2025
15 Januar 2025
7 Juli 2024
7 Juli 2024
7 Juli 2024
7 Juli 2024
6 Juli 2024
5 Juli 2024
5 Juli 2024
5 Juli 2024
Digital kamera Manualer
- Digital kamera Wanscam
- Digital kamera GE
- Digital kamera Olympus
- Digital kamera SeaLife
- Digital kamera Agfa
- Digital kamera Beha-Amprobe
- Digital kamera Nikon
- Digital kamera Tevion
- Digital kamera Fuji
- Digital kamera JVC
- Digital kamera Ingo
- Digital kamera Casio
- Digital kamera Mustek
- Digital kamera Pentax
- Digital kamera Sakar
Nyeste Digital kamera Manualer
15 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
11 Januar 2025
11 Januar 2025
11 Januar 2025
11 Januar 2025
11 Januar 2025
23 September 2024