Paxton Net2 Entry Manual

Paxton Samtaleanlæg Net2 Entry

Læs gratis den danske manual til Paxton Net2 Entry (8 sider) i kategorien Samtaleanlæg. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Paxton Net2 Entry, eller vil du spørge andre brugere om produktet?

Side 1/8
Page 1
05/11/2012
Ins-30202 Net2 Entry - Monitor
Technical Support
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
01273 811011 support@paxton.co.uk
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
Paxton
The Net2 Entry monitor is an audio/video monitor used to remotely communicate with visitors. It is powered using
power over Ethernet (PoE) and communicates with the other elements of the system using IPv6, providing 'plug
and play' installation. The only conguration required is the allocation of a monitor ID which the system uses to
identify the correct monitor.
If used in conjunction with Net2 access control software, this must be version 4.25 or later.
Description of product
2
3
4
5
1
6
1. Colour 3.5' Touch screen
2. Volume control
3. Speaker
4. Open door button
5. Microphone
6. Handset
Page 2
Installation
A desk mount stand is also available (PN: 337-847)
See also
: AN1127 - Net2 Entry - Planning and installation < http://paxton.info/1896 >
Determine where the monitor will be sited. The top right corner of the unit is regarded as the reference point for
drilling and measurements. Screws and wall plugs are provided in the tting kit.
1. Determine the position of the top mounting screw. Drill the hole and tap in one of the No 8 wall plugs.
2. Put in one of the screws, leaving a suitable gap to the wall surface and slide the bracket over it.
3. Mark the hole positions for the lower 2 screws and the network cable entry.
4. Remove the bracket and drill the additional holes.
5. Tap in the other 2 wall plugs and hang the bracket back on the top screw. Secure the bracket with the 3 screws.
Power is supplied via the network connection from a Net2 Entry controller or a network PoE switch.
30 mm
79 mm
170 mm
55 mm
186 mm
88 mm
120 mm
53 mm
118 mm
93 mm
A white network cable is supplied with the stand.
Feed this through the mount and push it into the
socket at the rear of the monitor. Clip the mount to
the monitor.


Produkt Specifikationer

Mærke: Paxton
Kategori: Samtaleanlæg
Model: Net2 Entry
Produktfarve: Silver, White
Videoopkald: Ja
Skærm: 4.3" TFT 480x272
Højttalertelefon: Ja
Antal knapper: 16

Har du brug for hjælp?

Hvis du har brug for hjælp til Paxton Net2 Entry stil et spørgsmål nedenfor, og andre brugere vil svare dig