Peerless SUF661 Manual

Peerless Flad panel støtte SUF661

Læs gratis den danske manual til Peerless SUF661 (29 sider) i kategorien Flad panel støtte. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Peerless SUF661, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/29

Installation and Assembly:

Peerless Ultra-Thin Flat Mount for 37" - 65" (94 - 165 cm)*

Flat Panel Displays

Model: SUF661

*Display Compatibility Requirements

• The depth of this mount (0.19") may not provide

sufﬁ cient space for proper ventilation on some displays.

Please refer to the manufacturer's requirements for

mounting your display before installation.

• The display must have a ﬂ at mounting surface, or the

mounting holes need to be on the furthest back surface

of the display.

• Input/Output connection must be properly oriented to

accommodate mounting 0.19" from the wall.

ISSUED: 04-01-11 SHEET #: 9029-2 07-27-11

2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerlessmounts.com

Max UL Load Capacity:

150 lb (68kg)

2 of 29 ISSUED: 04-01-11 SHEET #: 203-9029-2 07-27-11

NOTE: Read entire instruction sheet before you start installation and assembly.

Table of Contents

Parts List.................................................................................................................................................................................3

Installation to Wood Stud Wall ............................................................................................................................................ 4,5

Installation to Solid Concrete/Cinder Block walls ...................................................................................................................6

Installing Display Screws ........................................................................................................................................................7

Mounting Flat Panel Display ...................................................................................................................................................8

Tools Needed for Assembly

• stud ﬁ nder ("edge to edge" stud ﬁ nder is recommended)

• drill

• 5/16" (8mm) bit for concrete and cinder block wall

• 5/32" (4mm) bit for wood stud wall

• level

• Do not begin to install your Peerless product until you have read and understood the instructions and warnings

contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US

customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact

your local distributor.

• This mount is designed to attach the display 0.19" from the wall. Please refer to manufacturer's installation guide

recommendations for required distance from wall to avoid risk of injury or property damage.

• This product should only be installed by someone of good mechanical aptitude, has experience with basic building

construction, and fully understands these instructions.

• Make sure that the supporting surface will safely support the combined load of the equipment and all attached

hardware and components.

• Never exceed the Maximum UL Load Capacity. See page one.

• If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of

an "edge to edge" stud ﬁ nder is highly recommended.

• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

• Tighten screws ﬁ rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding

power.

• This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal

injury.

• This product was designed to be installed on the following wall construction only;

WALL CONSTRUCTION HARDWARE REQUIRED

• Wood Stud Included

• Wood Beam Included

• Solid Concrete Included

• Cinder Block Included

• Metal Stud Contact Qualiﬁ ed Professional (not evaluated by UL)

• Brick Contact Qualiﬁ ed Professional (not evaluated by UL)

• Other or unsure? Contact Qualiﬁ ed Professional (not evaluated by UL)

WARNING

Produkt Specifikationer

Mærke:	Peerless
Kategori:	Flad panel støtte
Model:	SUF661

Har du brug for hjælp?

Hvis du har brug for hjælp til Peerless SUF661 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Flad panel støtte Peerless Manualer

Peerless DST995 Manual

30 August 2024

Peerless DST970X2 Manual

30 August 2024

Peerless DS-MBY942L-3X1 Manual

30 August 2024

Peerless SAL737 Manual

30 August 2024

Peerless ST940-EXB Manual

30 August 2024

Peerless MOD-FPSKIT100 Manual

30 August 2024

Peerless MOD-FPSKIT100-CPF Manual

30 August 2024

Peerless ACC-VCS Manual

30 August 2024

Peerless ECMU-02-C Manual

30 August 2024

Peerless CMJ490 Manual

30 August 2024

Flad panel støtte Manualer

Nyeste Flad panel støtte Manualer

Chief MWCU Manual

3 April 2025

Chief KITXWXSM1U Manual

3 April 2025

Chief RLXT3 Manual

3 April 2025

Anywhere Cart AC-GO-16 Manual

2 April 2025

Proaim P-DMC Manual

2 April 2025

Proaim CT-VNGD-CS Manual

2 April 2025

Mount-It! MI-7919 Manual

2 April 2025

Mount-It! MI-384 Manual

2 April 2025

Proaim CT-VNGD-UC5 Manual

2 April 2025

Premier Mounts 7170-0977 Manual

2 April 2025