Perel SMART1230 Manual

Perel Lettelse SMART1230

Læs gratis den danske manual til Perel SMART1230 (8 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Perel SMART1230, eller vil du spørge andre brugere om produktet?

Side 1/8
QUICK START GUIDE
Introduction
This device should be returned to your
distributor or to a local recycling service . If
in doubt, contact your local waste
disposal authorities.
Safety Instructions
Read and understand this manual and all
safety signs before using this appliance.
For indoor use only.
Class III equipment.
Please refer to the full-length manual on
www.velleman.eu.
This device can be used by children aged from 8
years and above, and persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been
given supervision or instruction concerning the
use of the device in a safe way and understand
the hazards involved. Children shall not play with
the device. Cleaning and user maintenance shall
not be made by children without supervision.
Do not disassemble the appliance. There are no
user-serviceable parts.
Make sure that the available voltage does not
exceed the voltage stated in the specifications of
this manual.
Do not immerse the appliance.
The lamps are non-directional.
General Guidelines
Refer to the Velleman® Service and Quality
Warranty on www.velleman.eu.
All modifications of the device are forbidden for
safety reasons. Damage caused by user
modifications to the device is not covered by the
warranty.
Only use the device for its intended purpose.
Using the device in an unauthorised way will void
the warranty.
Damage caused by disregard of certain guidelines
in this manual is not covered by the warranty and
the dealer will not accept responsibility for any
ensuing defects or problems.
Nor Velleman nv nor its dealers can be held
responsible for any damage (extraordinary,
incidental or indirect) of any nature (financial,
physical…) arising from the possession, use or
failure of this product.
Keep this manual for future reference.
Operation
1. Download the Tuya app.
2. Connect your smart device to a 2.4 GHz WLAN
network. Launch the app and follow the first-time
setup instructions. Add the LED strip by tapping
+. Go to All Devices > Lighting and follow the on-
screen insructions.
3. Enter your WLAN password.
4. Switch on the LED strip. Wait 2 seconds, then just
switch it off and on 3 times repeatedly with a 2-
second interval. This will reset the LED strip.
5. Follow the -screen instructions to finish the on
installation.
6. Go to All Devices > Lighting and enter your wi-fi
password. The app should display the LED strip.
7. Edit the light name, e.g. Main Light and select the
room in which the LED strip is located.
8. You can now control the LED strip using the on-
board controls, the remote control and the
smartphone via the Tuya app. For full
functionality, please refer to the Me tab.
Care and Maintenance
Wipe clean with a soft cloth dampened with a
soap and water solution. Dry carefully before
screwing back in the socket.
Technical Specifications
electrical data
LED module .......... RGB 5050 LED x white 2835 LED
total nominal power ..................................... 4 W /m
power factor ................................................. > 0.5
energy consumption ............... 2 kWh/1000 h/50 cm
dimmable ...................................... no, only via app
power supply .............. 12 VDC, 24 W (adapter incl.)
light tehcnical data
colour .......................... cold white/warm white/RGB
colour temperature ................... 2700-6500 K + RGB
beam angle .................................................... 12
frequency range ............................. 2412-2472 MHz
RF power ...........................................max. 20 dBm
luminous flux
red ................................................... 21.74 lm/m
green ................................................. 37.2 lm/m
blue ................................................. 24.36 lm/m
cold white ............................................ 231 lm/m
warm white .......................................... 224 lm/m
colour rendering index .................................... > 80
starting time .............................................. < 0.5 s
warm-up time (60 %) .................................... < 1 s
lifespan
nominal lifetime ........................................ 25.000 h
number of switching cycles 10.000 ...........................
dimensions ........................................... 5 m 12 x mm
weight ............................................................. 190 g
wireless operation frequency ......................... 2.4 GHz
RC power supply ..................................... 1 x CR2025
RC power ........................................................ 3 VDC
RED Declaration of Conformity
Hereby, Velleman nv declares that the radio
equipment type SMART1230 is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address:
www.velleman.eu.
Use this device with original accessories only.
Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of
this device. For more info on this product and the
latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is
subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman
nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or
reduced to any electronic medium or otherwise
without the prior written consent of the copyright
holder.
SNELSTARTGIDS
Inleiding
U moet dit toestel naar uw verdeler of naar
een lokaal recyclagepunt brengen. Hebt u
vragen, contacteer dan de plaatselijke
autoriteiten betreffende de
verwijdering.
Veiligheidsvoorschriften
Lees en begrijp deze handleiding en de
veiligheidsinstructies vóór ingebruikname.
Enkel geschikt voor gebruik binnenshuis!
Toestel klasse III.
Raadpleeg de uitgebreide gebruikershandleiding
op www.velleman.eu.
Dit toestel is geschikt voor gebruik door kinderen
vanaf 8 jaar, door personen met fysieke,
zintuiglijke of verstandelijke beperkingen, of door
personen met gebrek aan ervaring en kennis, op
voorwaarde dat dit onder toezicht gebeurt van
een persoon die verantwoordelijk is voor hun
veiligheid of hun aanwijzingen heeft gegeven, hoe
zij het toestel moeten gebruiken en zich bewust
zijn van de risico's die het gebruik van het toestel
met zich meebrengt. Kinderen mogen niet met
het toestel spelen. De reiniging en het onderhoud
van het toestel mogen niet worden uitgevoerd
door kinderen, tenzij ze onder toezicht staan.
Demonteer het toestel niet. Er zijn geen door de
gebruiker te vervangen onderdelen.
De beschikbare netspanning mag niet hoger zijn
dan de spanning vermeld in de specificaties
achteraan de handleiding.
Dompel het toestel nooit onder in een vloeistof.
Niet-gerichte lampen.
Algemene richtlijnen
Raadpleeg de Velleman® service- en
kwaliteitsgarantie op www.velleman.eu.
Om veiligheidsredenen mag u geen wijzigingen
aanbrengen. Schade door wijzigingen die de
gebruiker heeft aangebracht aan het toestel valt
niet onder de garantie.
Gebruik het toestel enkel waarvoor het gemaakt
is. De garantie vervalt automatisch bij
ongeoorloofd gebruik.
De garantie geldt niet voor schade door het
negeren van bepaalde richtlijnen in deze
handleiding en uw dealer zal de
verantwoordelijkheid afwijzen voor defecten of
problemen die hier rechtstreeks verband mee
houden.
Noch Velleman nv noch zijn verdelers kunnen
aansprakelijk gesteld worden voor schade
(buitengewoon, incidenteel of onrechtstreeks)
van welke aard dan ook (financieel, fysisch…)
voortvloeiend uit het bezit, gebruik of falen van
dit product.
Bewaar deze handleiding voor verdere
raadpleging.
Gebruik
1. Download de Tuya-app.
2. Sluit uw smart apparaat aan op een 2.4 GHz
WLAN-netwerk. Start de app en volg de
instructies voor de eerste configuratie. Klik op +
om de ledstrip toe te voegen. Ga naar Alle
apparaten > Verlichting en volg de instructies op
het scherm.
3. Geef uw WLAN-wachtwoord in.
4. Schakel de ledstrip in. Wacht 2 seconden. Schakel
de ledstrip (met een interval van 2 seconden) 3
keer uit en in. Dit zal de ledstrip resetten.
5. Volg de instructies op het scherm om de
configuratie te voltooien.
6. Ga naar Alle apparaten > Verlichting en voer het
wifi-wachtwoord in. De ledstrip wordt
weergegeven in de app.
7. Wijzig de naam van de lamp, bv. hoofdverlichting,
en selecteer de ruimte waarin deze zich bevindt.
8. Via de Tuya-app kunt u de ledstrip bedienen met
de onboard knoppen, de afstandsbediening en de
smartphone. Alle functies zijn beschikbaar onder
het tabblad "Me".
Reiniging en onderhoud
Reinig met een zachte doek die licht bevochtigd is
met een oplossing van water en zeep. Droog
voorzichtig af voordat u deze opnieuw
vastschroeft.
Technische specificaties
elektrische gegevens
ledmodule ................... RGB-led 5050 x wit led 2835
nominaal vermogen ..................................... 4 W/m
vermogensfactor ........................................... > 0.5
energieverbruik ...................... 2 kWh/1000 h/50 cm
dimbaar ................................... neen, alleen via app
voeding ............. 12 VDC, 24 W (adapter meegelev.)
technische gegevens
kleur .................................... koudwit/warmwit/RGB
kleurtemperatuur ...................... 2700-6500 K + RGB
stralingshoek .................................................. 12
frequentiebereik ............................. 2412-2472 MHz
RF-vermogen .....................................max. 20 dBm
lichtstroom
rood ................................................. 21.74 lm/m
groen ................................................. 37.2 lm/m
blauw ............................................... 24.36 lm/m
koudwit ............................................... 231 lm/m
warmwit .............................................. 224 lm/m
kleurweergave-index ....................................... > 80
starttijd ...................................................... < 0.5 s
opwarmtijd (60 %) ........................................ < 1 s
levensduur
nominale levensduur ................................. 25.000 u
aantal schakelcycli ....................................... 10.000
afmetingen ........................................... 5 m x 12 mm
gewicht ........................................................... 190 g
draadloze werkfrequentie .............................. 2.4 GHz
voeding afstandsbediening ....................... 1 x CR2025
voedingsspanning afstandsbediening ................. 3 VDC
RED-conformiteitsverklaring
Hierbij verklaart Velleman nv, dat dit type
radioapparatuur SMART1230 conform is met richtlijn
2014/53/EU.
Raadpleeg de volgende website voor de volledige
tekst van de EU-conformiteitsverklaring:
www.velleman.eu.
Gebruik dit toestel enkel met originele accessoires.
Velleman nv is niet aansprakelijk voor schade of
kwetsuren bij (verkeerd) gebruik van dit toestel. Voor
meer informatie over dit product en de laatste versie
van deze handleiding, zie www.velleman.eu. De
informatie in deze handleiding kan te allen tijde
worden gewijzigd zonder voorafgaande kennisgeving.
© AUTEURSRECHT
Velleman nv heeft het auteursrecht voor deze
handleiding. Alle wereldwijde rechten voorbehouden.
Het is niet toegestaan om deze handleiding of
gedeelten ervan over te nemen, te kopiëren, te
vertalen, te bewerken en op te slaan op een
elektronisch medium zonder voorafgaande schriftelijke
toestemming van de rechthebbende.


Produkt Specifikationer

Mærke: Perel
Kategori: Lettelse
Model: SMART1230

Har du brug for hjælp?

Hvis du har brug for hjælp til Perel SMART1230 stil et spørgsmål nedenfor, og andre brugere vil svare dig