Pioneer S-HF11C Manual

Pioneer Højttaler S-HF11C

Læs gratis den danske manual til Pioneer S-HF11C (8 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 28 anmeldelser. Har du et spørgsmål om Pioneer S-HF11C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Thank you for buying this Pioneer product. Please read through

these operating instructions so you will know how to operate your

model properly. After you have finished reading the instructions,

put them away in a safe place for future reference.

Before you start

• The nominal impedance of this speaker system is 8 ohms.

Connect the speaker system to an amplifier with a load

impedance ranging from 4 to 16 ohms (a model with

“4 – 16 ” displayed on the speaker output terminals).Ω

• Do not touch the speaker cones as they are easily damaged.

In order to prevent damage to the speaker system resulting from

input overload, please observe the following precautions:

• Do not supply power to the speaker system in excess of the

maximum permissible input.

• When connecting or disconnecting anything in your AV

system, make sure the amplifier is switched off.

• When using a graphic equalizer to emphasize loud sounds in

the high-frequency range, do not use excessive amplifier

volume.

• Do not try to force a low-powered amplifier to produce loud

volumes of sound (the amplifier’s harmonic distortion will be

increased, and you may damage the tweeter).

Caution: installation

• Do not place the speakers on an unstable surface. It could

present a hazard if it falls, as well as damaging the equip-

ment.

• Switch off and unplug your AV equipment and consult the

instructions when connecting up components. Make sure you

use the correct connecting cables.

• Do not put a TV or other AV equipment on top of these

speakers. It could present a hazard if it falls, as well as

damaging the equipment.

• Do not attach the speakers to the wall or ceiling, or place them

in a high location. If the speaker grilles are not properly

attached, they could fall off, causing injury.

Caution: in use

• Don’t use the speakers to output distorted sound for long

periods of times. This can result in a fire hazard.

• Do not sit or stand on the speakers or let children play on the

speakers.

• Do not put large or heavy objects on top of the speakers.

WARNING: Handling the cord on this product or

cords associated with accessories sold with the

product will expose you to lead, a chemical known to

the State of California and other governmental

entities to cause cancer and birth defects or other

reproductive harm.

D36-P4_En

Wash hands after handling

Installing your speakers

Sounds played through speaker systems are easily affected in

subtle ways by the conditions in the listening space.

• These speakers are bookshelf-type speakers which will give

their best performance when placed on a solid, level surface

off the floor. Placing the speakers directly on the floor will

result in boomy, undefined sound, and we strongly recom-

mend using speaker stands for optimal performance. Ideally,

the tweeters should be at about ear level when seated in your

listening position.

• Do not attach these speakers to the wall or ceiling. They may

fall off and cause injury.

Pioneer cannot take responsibility for injuries or accidents

arising from improper mounting of these speakers on a wall or

ceiling.

• Speakers are heavy, so make sure the surface where you

install the speakers is solid. For good sound, the speakers

should be about 20cm away from the back wall and at least

50cm away from the side wall.

50cm 20cm

*Illustration shows S-HF21-LR

• ’ If you re using these speakers for your TV sound, install them

at equal distances either side of the TV and point them in the

same direction as the TV.

• If the room has a lot of reverberation, we recommend hanging

heavy fabric on the walls, and/or putting a carpet on the floor

to damp the sound. For best results, cover walls completely.

• Do not place the speaker where they will be in direct sunlight,

and avoid positioning them near heaters and air conditioners.

This may cause warping and discoloration of the speaker

cabinet and damage the speakers.

• These speakers are heavy. Placing them on an unstable

surface is dangerous, and should be avoided.

Not applicable to S-HF11C

• Place the speakers equal distances from your listening

position for good stereo sound. Use speaker cords of the

same length for each speaker.

50 60– º

*Illustration shows S-HF21-LR

www.pioneerelectronics.com

S-HF11C S-HF21-LR S-HF31-LR S-HF41-LR

OPERATING INSTRUCTIONS

SPEAKER SYSTEM

MODE D’EMPLOI

ENCEINTES ACOUSTIQUES

Pioneer assumes no liability whatsoever for damages resulting

from assembly, improper mounting, insufficient reinforce-

ment, misuse of the product, acts of nature, etc.

Choosing speaker cables

These speakers do not include speaker cables used for connecting

to a stereo. Note the following when selecting speaker cables.

• Use heavy-gauge speaker cable if possible, and keep the

cables to the minimum necessary length.

• If the length of cable required for the left and right speakers

require cables differs, use cables of the same length, matched

to the longer distance.

• Cables have differing characteristics. Keep this in mind when

using any cable.

• Select cables with as little resistance as possible, and make

sure the cables to the speaker terminals and amp are firm and

secure.

Connecting to an amplifier

Before connecting to your amplifier, make sure that the amp is

switched off.

Make sure that you match up the speaker terminals on the

speakers with those on your amplifier so that the positive (+)

terminals and negative ( ) terminals are paired.–

1 Twist off the protective shielding on the ends of the

speaker cable.

Twist together any stray strands of speaker wire.

2 Insert the speaker cable as shown.

Connect the speaker cables to the input terminals on the backs of

the speakers. For input terminal polarity, red is positive (+) and

black is negative (–).

S-HF41-LR speaker system

On the back of the receiver, loosen a speaker terminal, insert

the exposed wire, then tighten the terminal.

S-HF11-C / S-HF21-LR / S-HF31-LR speaker system

On the back of the speaker, push open a tab, insert the

exposed wire, then release the tab to secure the wire.

Red (+)

Black ( )–

3 Connect the other end of the speaker cable to the speaker

terminals on your amplifier.

S-HF41-LR speaker system only:

You can also use banana plugs to connect up the speaker.

• After connecting the plugs, pull lightly on the cables to make

sure that the ends of the cables are securely connected to the

terminals. Poor connections can create noise and interrup-

tions in the sound.

• If the cables' wires happen to be pushed out of the terminals,

allowing the wires to come into contact with each other, it

places an excessive additional load on the amp. This may

cause the amp to stop functioning, and may even damage the

amp.

Detatching and replacing the front grille

The front grille of this speaker system is removable. Proceed as

follows:

1 Hold both sides (top/bottom or left/right) of the grille,

and pull it towards you to detach it from the speaker system.

2 To replace the grille, align the holes in the grille’s corners

with the projections on the front of the speaker, and push

each of the corners into place.

Magnetic shielding

This speaker system is magnetically shielded. However, depending

on the installation location, color distortion may occur if the

speaker system is installed extremely close to the screen of a

television set.

If this happens, turn off the television, then turn it on again after 15

to 30 minutes. If the problem persists, place the speaker system

away from the television set.

Cleaning the speaker cabinet

With normal use, wiping with a dry cloth should be sufficient to

keep the cabinet clean. If necessary, clean with a cloth dipped in a

neutral cleanser diluted five or six times with water, and wrung out

well. Do not use furniture wax or cleansers.

Never use alcohol, thinners, benzine, insecticide sprays or other

chemicals on or near this unit since these will corrode the

surfaces.

Striped half of speaker

cable to positive (+)

speaker terminal

Other half of speaker

cable to negative (–)

speaker terminal

Produkt Specifikationer

Mærke:	Pioneer
Kategori:	Højttaler
Model:	S-HF11C

Har du brug for hjælp?

Hvis du har brug for hjælp til Pioneer S-HF11C stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Pioneer Manualer

Pioneer RM-07 Manual

30 December 2025

Pioneer TS-A4671F Manual

14 December 2024

Pioneer TS-A6881F Manual

14 December 2024

Pioneer TS-A6961F Manual

14 December 2024

Pioneer TS-A1371F Manual

14 December 2024

Pioneer TS-A1671F Manual

14 December 2024

Pioneer TS-M801PRO Manual

14 December 2024

Pioneer TS-M651PRO Manual

14 December 2024

Pioneer TS-W3020PRO Manual

14 December 2024

Pioneer TS-6900PRO Manual

14 December 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Edifier MP330 Manual

15 Juni 2025

Hecate G1500 Manual

14 Juni 2025

XLEADER SoundAngel A8 Manual

14 Juni 2025

RCF DU 31EN Manual

14 Juni 2025

Omnitronic PS-2.5WB Manual

14 Juni 2025

Greadio R-919 Manual

14 Juni 2025

J.W. SPEAKER 8700 Evolution J2 Manual

14 Juni 2025

SpringFlora HM11 Manual

14 Juni 2025

Fiodio F-130 Manual

14 Juni 2025

HEYSONG Bubble Manual

14 Juni 2025