Planet FGSD-2621P Manual

Planet Skifte FGSD-2621P

Læs gratis den danske manual til Planet FGSD-2621P (4 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 73 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 37 anmeldelser. Har du et spørgsmål om Planet FGSD-2621P, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET 16-/24-Port 10/100TX 802.3at PoE

+ 2-Port 10/100/1000T + 1-Port shared 1000X SFP Desktop Switch,

FGSD-1821P or FGSD-2621P. “802.3at PoE+ Switch” mentioned in this

Guide refers to the FGSD-1821P or FGSD-2621P

Open the box of the 802.3at PoE+ Switch and carefully unpack it. The

box should contain the following items

The 802.3at PoE+ Switch x 1 User’s Manual x 1 Power Cord x 1

SFP Dust Cap

x 1 Screws x 8 Rack-mounting

Brackets x 2 Rubber Feet x 4

If any of these pieces are missing or damaged, please contact your

dealer immediately; if possible, retain the carton including the original

packing material, and use them again to repack the product in case

there is a need to return it to us for repair.

 Per 10/100BASE-TX Port

LED Color Function

10/100

LNK/ACT Green

Lights to indicate the link through that

port is successfully established.

Blinks to indicate that the Switch is

actively sending or receiving data over

that port.

PoE in Use Amber Lights to indicate the port is providing

PoE DC in-line power.

 Per 10/100/1000BASE-T Port

LED Color Function

10/100/1000

LNK/ACT Green

Lights to indicate the link through that

port is successfully established.

Blinks to indicate that the Switch is

actively sending or receiving data over

that port.

 1000BASE-X SFP Port

LED Color Function

1000

LNK/ACT Green

Lights to indicate the link through that port

is successfully established at 1000Mbps.

Blinks to indicate that the Switch is actively

sending or receiving data over that port.

3 Hardware Installation

3.1 Rack Mounting

To install the 802.3at PoE+ Switch in a 19-inch standard rack, follow the

instructions described below.

Step 1: Place your 802.3at PoE+ Switch on a hard at surface, with

the front panel positioned towards your front side.

Step 2: Attach a rack-mount bracket to each side of the 802.3at PoE+

Switch with supplied screws attached to the package. Figure

3-1 shows how to attach brackets to one side of the 802.3at

PoE+ Switch.

1000X SFP

LNK

PoE-in-Use

ACT

Standard

VLAN

Extend

PWR

PoE Max

2 6

4 8 10 14

12 16

1 5

3 7 9 13

11 15

Figure 3-1: Attaching the Brackets to the 802.3at PoE+ Switch.

Caution

You must use the screws supplied with the mounting

brackets. Damage caused to the parts by using incorrect

screws would invalidate the warranty.

Step 3: Secure the brackets tightly.

Step 4: Follow the same steps to attach the second bracket to the

opposite side.

Standard Mode (default)

Power

PoE IP Camera

PoE

100 meters (328 feet)

PoE

100BASE-TX UTP with PoE

FGSD-1821P

Standard

VLAN

Extend

VLAN Isolation Mode

NVR

Ports 1 to 16

Access Denied

PoE

100BASE-TX UTP with PoE

FGSD-1821P

IP Camera

Ports 17~18 and SFP Port 17

to Ports 1~16 Access Permitted

1000BASE-T UTP

Standard

VLAN

Extend

Extend Mode

Ports 1 to 8

Power

250 meters (820 feet)

PoE

10BASE-T UTP with PoE

PoE IP Camera

FGSD-1821P

Standard

VLAN

Extend

2. Hardware Introduction

2.1 Front Panel

The front panel of the 802.3at PoE+ Switch consists of 16/24 auto-

sensing 10/100BASE-TX RJ45 ports, 2 auto-sensing 10/100/1000BASE-T

RJ45 ports and 1 1000BASE-X SFP port. The LED Indicators are also

located on the front panel of the 802.3at PoE+ Switch.

1000X SFP

LNK

PoE-in-Use

ACT Standard

VLA N

Ex tend

PWR

PoE Ma x

2 64 8 10 1412 16

1 53 7 9 1311 15

Figure 2-1: FGSD-1821P Switch Front Panel

1000X SFP

1 2 3 4 5 6 7 8 9 10 12 13 14 1 5 16 17 18 19 2 0 21 22 23 2411

Standa rd

VLA N

Ex tend

LNK ACT

4 128 16 20 24

3 117 15 19 23

2 106 14 18

PoE Max

1 95 13 17 PWR21

PoE -

in-Use 26

Figure 2-2: FGSD-2621P Switch Front Panel

2.2 LED Indicators

 System

LED Color Function

PWR Green Lights to indicate the Switch has power.

PoE

(max.) Green

O to indicate the PoE power is less than 80%

of total power.

Lights to indicate the PoE power is above

80%.

2.3 Multiple Functions of DIP Switch

The front panel of the 802.3at PoE+ Switch provides one DIP switch for

Standard VLAN Extend, or mode selection. The detailed descriptions

are shown in the following table.

DIP Switch Mode Function

Standard

VLAN

Extend

This mode makes the 802.3at PoE+ Switch

operate as a and all PoE+ general switch

ports operate at 10/100Mbps auto-negotiation.

All ports can communicate with one another.

Standard

VLAN

Extend

This mode makes the 802.3at PoE+ Switch

operate as a switch and VLAN isolation

For FGSD-1821P:

1. Ports 1 to 16 will isolate respectively.

2. Ports 1 to 16 can only communicate with

ports 17~18 (uplink ports) and SFP port 17.

For FGSD-2621P:

1. Ports 1 to 24 will isolate respectively.

2. Ports 1 to 24 can only communicate with

ports 25~26 (uplink ports) and SFP port 26

Standard

VLAN

Extend

This mode makes the 802.3at PoE+ Switch

operate as a switch and Long Reach PoE

1. Ports 1 to 8 support farthest transmission

distance of up to 250 meters

2. Ports 1 to 8 have a data rate of 10Mbps

3. All ports can communicate with one

another.

Note

Please select a DIP switch mode before powering on the

802.3at PoE+ Switch.

2.4 Rear Panel

The rear panel of the 802.3at PoE+ Switch indicates an AC power

socket, which accepts input power from 100 to 240V AC, 50-60Hz, 5A.

50/60Hz

100-240V , 5A max.

Figure 2-3: Switch Rear Panel

 AC Power Receptacle

Power

Notice

The device is a power-required device, which means

it will not work till it is powered. If your networks

should be active all the time, please consider using UPS

(uninterrupted power supply) for your device. It will

prevent you from network data loss or network downtime.

Power

Notice

In some areas, installing a surge suppression device may

also help to protect your 802.3at PoE+ Switch from being

damaged by unregulated surge or current to the 802.3at

PoE+ Switch or the power adapter.

Step 5: After the brackets are attached to the 802.3at PoE+ Switch,

use suitable screws to securely attach the brackets to the

rack, as shown in Figure 3-2.

1000X SF P

LNK

PoE-in-Us e

ACT

Standa r d

VLAN

Exten d

PWR

PoE Max

2 6

4 8 10 14

12 16

1 5

3 7 9 13

11 15

Figure 3-2: Mounting the 802.3at PoE+ Switch in a Rack

Step 6: Connect your 802.3at PoE+ Switch to 802.3af/802.3at

complied PDs and other network devices.

A. Connect one end of a standard network cable to the

10/100/1000BASE-T RJ45 ports on the front panel of the 802.3at

PoE+ Switch.

B. Connect the other end of the cable to the network devices such as

printer servers, workstations or routers, etc.

Step 7: Supply power to the 802.3at PoE+ Switch.

A. Connect one end of the power cable to the 802.3at PoE+ Switch.

B. Connect the power plug of the power cable to a standard wall

outlet.

When the 802.3at PoE+ Switch receives power, the power LED should

remain solid Green.

Produkt Specifikationer

Mærke:	Planet
Kategori:	Skifte
Model:	FGSD-2621P

Har du brug for hjælp?

Hvis du har brug for hjælp til Planet FGSD-2621P stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte Planet Manualer

Planet DCS-7342-32C2X Manual

8 Oktober 2024

Planet DCS-7342-48Y8C Manual

8 Oktober 2024

Planet GSD-1121XP Manual

18 September 2024

Planet BSP-115PV-15A Manual

7 September 2024

Planet BSP-115HP-5A Manual

5 September 2024

Planet IGTP-805AT Manual

3 September 2024

Planet IPM-16230 Manual

3 September 2024

Planet FSD-804P Manual

3 September 2024

Planet UPOE-1600G Manual

1 September 2024

Planet WS-1032P Manual

1 September 2024

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025