Planet GSW-1820HP Manual

Planet Skifte GSW-1820HP

Læs gratis den danske manual til Planet GSW-1820HP (4 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Planet GSW-1820HP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET 16-/24-Port 10/100/1000T 802.3at

PoE+ Ethernet Switches, GSW-1820HP and GSW-2620HP. “802.3at

PoE+ Switches” mentioned in this Guide refers to the GSW-1820HP

and GSW-2620HP.

Open the box of the 802.3at PoE+ Switches and carefully unpack it. The

box should contain the following items:

The 802.3at PoE+ Switch x 1 User’s Manual x 1 Power Cord x 1

SFP Dust Cap

x 2 Screws x 8 Rack-mounting

Brackets x 2

Rubber Feet

x 4

If any of these pieces are missing or damaged, please contact your

dealer immediately; if possible, retain the carton including the original

packing material, and use them again to repack the product in case

there is a need to return it to us for repair.

 For GSW-2620HP:

- Ports 1 to 22 will isolate respectively.

- Ports 1 to 22 can only communicate with ports 23~24

(uplink ports) and SFP ports 25~26

 Extend mode: Ports 1 to 8 have a data rate of 10Mbps; the

farthest transmission distance up to 250 meters and all ports

can communicate with each other.

 The DIP switch can isolate ports to prevent broadcast storm and

defend DHCP spoong

 Automatic address learning and address aging

 Supports Energy-Ecient Ethernet (EEE) function (IEEE 802.3az)

 Hardware

 19-inch rack-mount size, 1U height

 LED indicators for system power, per port PoE ready and PoE

activity, speed, Link/Act

 Ethernet Link Energy-saving technology

- Link down power saving

- Intelligent scale power based on cable length

3.ProductSpecications

Model GSW-1820HP GSW-2620HP

Hardware Specications

10/100/1000BASE-T

Copper Ports

16 auto-MDI/MDI-X

ports

24 auto-MDI/MDI-X

ports

802.3af/802.3at

PoE+ Injector Ports 16 24

1000BASE-X SFP

Ports 2 2

 Per 10/100/1000BASE-T Port

LED Color Function

1000

LNK/ACT Green

Lights to indicate the link through that port

is successfully established at 1000Mbps.

Blinks to indicate that the Switch is actively

sending or receiving data over that port.

10/100

LNK/ACT Amber

Lights to indicate the link through that port

is successfully established at 10/100Mbps.

Blinks to indicate that the Switch is actively

sending or receiving data over that port.

PoE in

Use Amber Lights to indicate the port is providing 54V

DC in-line power.

 Per 1000BASE-X SFP Interface

LED Color Function

1000

LNK/ACT Green

Lights to indicate the link through that port

is successfully established at 1000Mbps.

Blinks to indicate that the Switch is actively

sending or receiving data over that port.

4.3 Multiple Functions of DIP Switch

The front panel of the 802.3at PoE+ Switch provides one DIP switch for

Standard VLA Extend, N and mode selections. The detailed descriptions

are shown in the following table.

Power over Ethernet

PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE

PoE Power Supply

Type

End-span:

1/2 (+), 3/6 (-)

End-span:

1/2 (+), 3/6 (-)

PoE Power Output

Per port 54V DC, 300mA. max. 15.4 watts

(IEEE 802.3af)

Per port 54V DC, 600mA. max. 30 watts

(IEEE 802.3at)

PoE Power Budget 240 watts

Number of PDs,

7 watts 16 24

Number of PDs,

15.4 watts 15 15

Number of PDs,

30 watts 8 8

Standards Conformance

Regulatory

Compliance FCC Part 15 Class A, CE

Standards

Compliance

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab Gigabit 1000BASE-T

IEEE 802.3z Gigabit SX/LX

IEEE 802.3x ow control and back pressure

IEEE 802.3af Power over Ethernet

IEEE 802.3at Power over Ethernet Plus

IEEE 802.3az Energy-Ecient Ethernet

Environment

Operating Temperature: 0 ~ 50 degrees C

Relative Humidity: 5 ~ 95% (non-condensing)

Storage Temperature: -10 ~ 70 degrees C

Relative Humidity: 5 ~ 95% (non-condensing)

2. Product Features

 Physical Port

 16-/24-port 10/100/1000BASE-T Gigabit RJ45 copper

 2 1000BASE-X SFP slots

 Power over Ethernet

 Complies with IEEE 802.3af/at Power over Ethernet end-span PSE

 Up to 16/24 ports of IEEE 802.3af / 802.3at devices powered

 Supports PoE power up to 30 watts for each PoE port, all power

up to 240W PoE budget.

 Each port supports 54V DC power to PoE powered device

 Auto detects powered device (PD)

 Circuit protection prevents power interference between ports

 Remote power feeding up to 100m in standard mode with 250m in

extend mode

 Switching

 Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/

MDI-X

 Supports IEEE 802.3x ow control for Full-duplex Mode and back-

pressure for Half-duplex Mode

 Integrates address look-up engine, supporting 8K absolute MAC

addresses

 9K jumbo frame supports all speeds (10/100/1000Mbps)

 IEEE 802.1Q VLAN transparency

 Hardware-based DIP switch for and Standard, VLAN Extend

mode selection;

 VLAN mode:

 For GSW-1820HP:

- Ports 1 to 14 will isolate respectively.

- Ports 1 to 14 can only communicate with ports 15~16

(uplink ports) and SFP ports 17~18.

DIP Switch

Selectable operation mode

 Standard

 VLAN

 Extend

Dimensions

(W x D x H) 440 x 208 x 44 mm (1U height)

Enclosure Metal

Weight 2.55kg 2.79kg

Power Requirements 100~240V AC,

50/60Hz, 3A max.

100~240V AC,

50/60Hz, 3A max.

Power Consumption/

Dissipation

Max. 275 watts/938

BTU

Max. 282 watts/962

BTU

Thermal Fan 2

LED

 System:

Power (Green)

 10/100/1000T RJ45 Interfaces

1000 LNK/ACT (Green),

10/100 LNK/ACT (Amber),

PoE (Amber)

 1000X SFP Interfaces

1000 LNK/ACT (Green)

Switching Specications

Switch Architecture Store-and-Forward

Switch Fabric 36Gbps/non-blocking 52Gbps/non-blocking

Switch

Throughput@64bytes 26.8Mpps 38.7Mpps

MAC Address Table 8K entries

Jumbo Frame 9216 bytes

Flow Control IEEE 802.3x pause frame for full duplex;

back pressure for half duplex

4. Hardware Introduction

4.1 Front Panel

The Front Panel of the 802.3at PoE+ Switch consists of 16/24 auto-

sensing 10/100/1000Mbps Ethernet RJ45 ports. The LED Indicators are

also located on the front panel of the 802.3at PoE+ Switch.

1 3 5 7 9 13 1511

162

PWR

4 6 8 10 12 14

PoE -i n-U s e

ACTLNK1000

ACTLNK10/100

PoE-in-Use ACTLNK1000

Stand ard

Ext end

VLAN

17 18

10 12 14 16

9 13 1511

2468

1357

Figure 4-1: GSW-1820HP Switch Front Panel

1 3 5 7 9 13 15 17 19 21 2311

PWR

4 6 8 10 12 14 16 18 20 22 24

PoE -i n-Us e

ACTLNK1000

ACTLNK10/100

PoE-in-Use

ACTLNK1000

Standa rd

Ext end

VLAN

18 20 22 24

17 19 21 23

10 12 14 16

9 13 1511

2468

1357

Figure 4-2: GSW-2620HP Switch Front Panel

4.2 LED Indicators

 System

LED Color Function

PWR Green Lights to indicate the Switch has power.

DIP Switch Mode Function

Standard

VLAN

Extend

This mode makes the 802.3at PoE+ Switch

operate as a general switch and all PoE

ports operate at 10/100/1000Mbps auto-

negotiation. All ports can communicate with

one another.

Standard

VLAN

Extend

This mode makes the 802.3at PoE+ Switch

operate as a switch andVLAN isolation

For GSW-1820HP:

1. Ports 1 to 14 will isolate respectively.

2. Ports 1 to 14 can only communicate with

ports 15~16 (uplink ports) and SFP ports

17~18.

For GSW-2620HP:

1. Ports 1 to 22 will isolate respectivelyy.

2. Ports 1 to 22 can only communicate with

ports 23~24 (uplink ports) and SFP ports

25~26.

Standard

VLAN

Extend

This mode makes the 802.3at PoE+ Switch

operate as a Long Reach PoE switch and

1. Ports 1 to 8 support farthest transmission

distance of up to 250 meters

2. Ports 1 to 8 have a data rate of 10Mbps

3. All ports can communicate with one

another.

Note

Please adjust the DIP switch before powering on the

802.3at PoE+ Switch.

Produkt Specifikationer

Mærke:	Planet
Kategori:	Skifte
Model:	GSW-1820HP
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	440 mm
Dybde:	208 mm
Højde:	44 mm
Vægt:	2670 g
Produktfarve:	Blå
Formfaktor:	1U
Opbevaringstemperatur (T-T):	-10 - 70 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 95 %
Driftstemperatur (T-T):	0 - 50 °C
Husmateriale:	Metal
Certificering:	FCC 15 A, CE
Strømforbrug (maks.):	270 W
Netværksstandarder:	IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
LED-indikatorer:	Activity, LAN, Link, PoE, Power
Indgangsstrøm:	5 A
Fiber optisk strømstik:	MiniGBIC, SFP
Fuld duplex:	Ja
Strøm over Ethernet (PoE):	Ja
Switch-type:	Ikke administreret
Total Power over Ethernet (PoE):	240 W
Power over Ethernet plus (PoE+) porte, antal:	16
Power over Ethernet (PoE) effekt pr. port:	30 W
10G understøttelse:	Ingen
Auto MDI/MDI-X:	Ja
VLAN understøttelse:	Ja
Flowkontrol support:	Ja
Basis omskiftning RJ-45 Ethernet porte, antal:	16
Basis omskiftning RJ-45 Ethernet porttype:	Gigabit Ethernet (10/100/1000)
Fiber ethernet kabelteknologi:	1000BASE-X
Opbevar-og-frem:	Ja
MAC adresselabel:	8000 entries
Switch kapacitet:	36 Gbit/sek.
Gennnemløb:	26.8 Mpps
Jumbo Frames support:	Ja
Jumbo rammer:	9216
Stativ-montering:	Ja
Antal blæsere:	2 blæser(e)
Varmeafgivelse:	921 BUT/t
MAC-adresse auto-indlæring understøttet:	Ja
MAC-adresse auto-forældelse understøttet:	Ja
Fiberkanal porte:	2
Power over Ethernet (PoE) spænding:	52 V